Next-in-Thread Next Message

Sad Wavelen(Lucent) PCI-PCMCIA adapter problems 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Jul 27
From: Stuart Butterfield ButterfieldS

I'm having problems trying to remotely configure wireless
networking for a colleague in Eindhoven! He's got a Lucent
Wavelan Turbo 11mb card and one of their PCI-PCMCIA 
adapters.

I have the same equipment working on a PC on my desk,
but cannot get it going on his machine. I've tried the
latest PCMCIA sources (3.1.19) and the ones that are 
working for me (3.1.14), with the same result:

kernel: Linux PCMCIA Card Services 3.1.14 
kernel:   options:  [pci] [cardbus] [apm] 
kernel: PCI routing table version 1.0 at 0xf6740 
kernel:   unknown PCI interrupt router 8086:2420 

I've seen a few other folks post messages with similar
problems, but I'm not sure if the previous suggested
causes apply here.

The device in question shows up in /proc/pci

  Bus  0, device  31, function  0:
    ISA bridge: Intel Unknown device (rev 1).
      Vendor id=8086. Device id=2420.
      Medium devsel. Fast back-to-back capable.
      Master Capable.  No bursts.

and from lspci

00:1f.0 ISA bridge: Intel Corporation 82801AB 82810 Chipset
        ISA Bridge (LPC) (rev 01)


Any advice greatly appreciated.

Stuart.Butterfield@philips.com

Next-in-Thread Next Message

Select this message: Wavelen(Lucent) PCI-PCMCIA adapter problems

Messages Inline: 1 All Outline: 1 2 All

1. None Unknown interrupt router by David Hinds, 2000, Jul 27
1. Feedback Re: Unknown interrupt router by Stuart Butterfield, 2000, Jul 28
(_ None That is not a good sign by David Hinds, 2000, Jul 28
1. Agree Yep, it's a PCI failure by Stuart Butterfield, 2000, Jul 31
2. Agree Yep, it's a PCI failure by Stuart Butterfield, 2000, Jul 31
2. Note Got another PCI adaptor working by Brian Candler, 2000, Jul 29

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]