[ Next-in-Thread ]  [ Next Message ] 

Question: Unresolved symbols in pcmcia-cs-3.1.19 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Aug 07
From: Wenhua Xing Eric 

No problem while building 3.1.19, but when I load the module pcnet_cs, there shows "unresolved symbol" messages for below function call,

ei_open
ethdev_init
register_pccard_driver
unregister_pccard_driver
ei_interrupt
NS8390_init

I tried it in linux kernel 2.2.15 and 2.2.36.

And I have seen "CFLAGS" solution, the same? How to do?

Any idea? Thanks!

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

Don't load PCMCIA modules by hand

Re: Question: Unresolved symbols in pcmcia-cs-3.1.19 (Wenhua Xing)
Date: 2000, Aug 07
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

> No problem while building 3.1.19, but when I load the module
> pcnet_cs, there shows "unresolved symbol" messages for below function
> call, 

That looks normal to me; the pcnet_cs module depends on the 8390
module, which has to be loaded first.  And why are you trying to load
this module by hand, anyway?

(loading PCMCIA modules by hand is almost never productive, so it is
almost certainly true that whatever you are trying to do is wrong)

-- Dave

More: PCMCIA under pci-pcmcia bridge

Re: Don't load PCMCIA modules by hand (David Hinds)
Date: 2000, Aug 08
From: Wenhua Xing Eric 

I get a board with CL-PD6729 as controler to control two pcmcia cards, one sandisk memory card, one linksys pcm100 NIC. 

And the trouble is there are two other pci NICs in the same pci-bus with CL-PD6729. 

That is to say, there are three pci-devicees under the same pci-bridge, and one device is a pci-pcmcia-bridge.

Now I want to make them work together.

And the basic questions are: 
1. Unknow Memory Size;
2. Delay ether0 (conflict?)

Thanks!

Question: Any conflict on this board?

Re: Don't load PCMCIA modules by hand (David Hinds)
Date: 2000, Aug 08
From: Wenhua Xing Eric 

I mention detailed info in "PCMCIA under pci-pcmcia bridge", are there any conflict on this board? But they work well in Win98.

Thanks!
Unresolved symbols in pcmcia-cs-3.1.19

[ Add Message ]  to: "Unresolved symbols in pcmcia-cs-3.1.19"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]