[ Next-in-Thread ]  [ Next Message ] 

Don't load PCMCIA modules by hand 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: Unresolved symbols in pcmcia-cs-3.1.19 (Wenhua Xing)
Date: 2000, Aug 07
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

> No problem while building 3.1.19, but when I load the module
> pcnet_cs, there shows "unresolved symbol" messages for below function
> call, 

That looks normal to me; the pcnet_cs module depends on the 8390
module, which has to be loaded first.  And why are you trying to load
this module by hand, anyway?

(loading PCMCIA modules by hand is almost never productive, so it is
almost certainly true that whatever you are trying to do is wrong)

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

More: PCMCIA under pci-pcmcia bridge

Re: Don't load PCMCIA modules by hand (David Hinds)
Date: 2000, Aug 08
From: Wenhua Xing Eric 

I get a board with CL-PD6729 as controler to control two pcmcia cards, one sandisk memory card, one linksys pcm100 NIC. 

And the trouble is there are two other pci NICs in the same pci-bus with CL-PD6729. 

That is to say, there are three pci-devicees under the same pci-bridge, and one device is a pci-pcmcia-bridge.

Now I want to make them work together.

And the basic questions are: 
1. Unknow Memory Size;
2. Delay ether0 (conflict?)

Thanks!

Question: Any conflict on this board?

Re: Don't load PCMCIA modules by hand (David Hinds)
Date: 2000, Aug 08
From: Wenhua Xing Eric 

I mention detailed info in "PCMCIA under pci-pcmcia bridge", are there any conflict on this board? But they work well in Win98.

Thanks!
Don't load PCMCIA modules by hand

[ Add Message ]  to: "Don't load PCMCIA modules by hand"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]