Next-in-Thread Next Message

Question Sycard PCChost 1200 supported? 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Aug 09
From: Paul Graham grahamp

I have a Sycard PCChost 1200 and a system running RedHat 6.2 with the "stock" version of the kernel (2.2.14-5.0) and pcmcia-cs (version 3.1.8). Does this (or any) version of pcmcia-cs work with the PCChost 1200 board? If so, are there any special settings that are required to get the board working? I noticed an earlier comment on this list that seemed to indicate that some people have worked with the board under Linux.

 Thanks,

 Paul
 ==================
 grahamp@ee.byu.edu

Next-in-Thread Next Message

Select this message: Sycard PCChost 1200 supported?

Messages Inline: 1 All Outline: 1 2 All

1. None Yes, but there is a trick by David Hinds, 2000, Aug 09
(_ Question Trick for IRQ's on Sycard PCChost 1200?? by Paul Graham, 2000, Aug 11

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]