[ Next-in-Thread ]  [ Next Message ] 

Question: Sycard PCChost 1200 supported? 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Aug 09
From: Paul Graham grahamp

I have a Sycard PCChost 1200 and a system running RedHat 6.2 with the "stock" version of the kernel (2.2.14-5.0) and pcmcia-cs (version 3.1.8). Does this (or any) version of pcmcia-cs work with the PCChost 1200 board? If so, are there any special settings that are required to get the board working? I noticed an earlier comment on this list that seemed to indicate that some people have worked with the board under Linux. 

 Thanks,

 Paul
 ==================
 grahamp@ee.byu.edu

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

Yes, but there is a trick

Re: Question: Sycard PCChost 1200 supported? (Paul Graham)
Date: 2000, Aug 09
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

You should specify:

  PCIC_OPTS="p2cclk=1"

in your startup options.  This will be mentioned in the HOWTO.

-- Dave
1. Question: Trick for IRQ's on Sycard PCChost 1200?? by Paul Graham, 2000, Aug 11
Sycard PCChost 1200 supported?

[ Add Message ]  to: "Sycard PCChost 1200 supported?"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]