[ Next-in-Thread ]  [ Next Message ] 

More: I now have 1 card working. But not Compaq WLAN card. 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: PCMCIA won't start (Kernel 2.4.0-test5, pcmcia-cs-3.1.20) (Talei McLeod)
Re: I don't think the PnP card has been activated (David Hinds)
Re: Question: Now all my cards are being detected as "Anonymous Memory" (Talei McLeod)
Date: 2000, Aug 11
From: Talei McLeod talei

I have found one card that is correctly identified. (However I don't have a linux driver for this card so I don't know whether it would have been 100% successful).

I still cannot get my WLAN card to work. It is a Compaq WL100 card.

When the card is inserted there is a low beep followed by a high beep.

I have tried adjusting the memory ranges as suggested in the HOWTO but to no luck. (I have only succeeded in creating configurations which don't recognise the card that was being recognised).

I have also tried excluding different irq's.

I have these details about the card and reader from Windows :

PC Card Reader :

Memory range : 0c002000-0c002fff

WLAN Card :

IRQ : 10 I/O : 1800-1835

Any suggestions on how to get this card going would be much appreciated.

Thanks, Talei.

[ Next-in-Thread ]  [ Next Message ] 

Select this message: I now have 1 card working. But not Compaq WLAN card.

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]