[ Next-in-Thread ]  [ Next Message ] 

Question: Something broke after test6-pre7 ( same for 3.1.18-20 ) 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Aug 11
From: Philip Langdale philipl

Hi,

I've been tracking the 2.4.0 development releases very closely and from test6-pre7 onward ( now at test6 ) something changed in the kernel which has broken the core pcmcia drivers. I've tried 3.1.18, .19 and the 7/8 .20 prerelease. All with the same results. The pcmcia_core driver reports a failure to detect the i82365 chip which it could always do before. Then, of course the i82365 driver can't load because it can't find the device to drive.

The error message is:

Intel PCIC Probe: Bridge register mapping failed: Check cb_mem_base setting.

But, of course, cb_mem_base isn't even compiled in for this kernel ( and compiling it back in didn't help ). I'm afraid I'm not knowledgable enough about these things to track down what's happened.

Hopefully you can shed some light on this.

thanks,

--phil

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Something broke after test6-pre7 ( same for 3.1.18-20 )

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. I don't know where the problem is by David Hinds, 2000, Aug 11
(_ Looks like it has been sorted out by David Hinds, 2000, Aug 11
(_ Re: Looks like it has been sorted out by Philip Langdale, 2000, Aug 12

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]