Next-in-Thread Next Message

More You're a genius! 

Forum: PCMCIA Installation and Configuration Issues
Re: Question "no valid ROM images found"? (Darin Davis)
Re: None I think this is a memory window problem (David Hinds)
Date: 2000, Sep 01
From: Darin Davis dadavis

Dave,

Never in a million years would I have guessed that!
My config.opts file contained:

   include memory 0xc0000-0xfffff, memory 0xa0000000-0xa0ffffff

I changed it to:

   include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff

and the card now gets detected.

However, in order to successfully ping another
device on the network, I have to "ifconfig eth0 down"
(which deletes the default route)and "ifconfig eth0 up".
With this done, my machine can communicate.  Any ideas
on why I have to manually down/up the interface?

Something else that seems odd is that while the
label on the physical card itself says it's a RBE,
'cardctl ident' says:

Socket 0:
  no product info available
Socket 1:
  product info: "Xircom", "CardBus Ethernet II 10/100", "CBEII-10/100", "1.03"
  manfid: 0x0105, 0x0103
  function: 6 (network)

I thought CBE wasn't supported.  But, I'm not complaining!

Many thanks for your help.
Darin

Next-in-Thread Next Message

Select this message: You're a genius!

Messages Inline: 1 All Outline: 1 2 All

1. None The latest beta might have some effect by David Hinds, 2000, Sep 01

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]