Next-in-Thread Next Message

More Working now, but one last question 

Forum: PCMCIA Installation and Configuration Issues
Re: Question Machine Reboots on high volume network traffic (Jason M. Sullivan)
Re: None Disabling IO probing is a bad idea (David Hinds)
Date: 1999, Nov 30
From: Jason M. Sullivan Jason0x21

Ok, I got the card working with a minimal amount of frittering around, but one question remains. The port scan picked up a port that seemed to work (or worked much better than the previous ones), but my memory map lists that as in use by MIDI. I suppose I need to check and see if I can play a MIDI tune while accssing the nextwork, but the question is this:

How does the port actually get asigned? Does it just look for a "free" port?, and tell the card where to respond?

If that's the case, I'm guessing I should probably exclude the MIDI port?


Next-in-Thread Next Message

Select this message: Working now, but one last question

Messages Inline: 1 All Outline: 1 2 All

1. None Clean resource allocation is hard by David Hinds, 1999, Nov 30
(_ More Time for me to talk to TI/Acer by Jason M. Sullivan, 1999, Nov 30

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]