Next-in-Thread Next Message

Sad Problems with 3.1.7 kernel 2.2.13 Redhat 6.0 

Forum: PCMCIA Installation and Configuration Issues
Date: 1999, Dec 19
From: dave_sneddon

I am having problems with an ISA to PCMCIA card, in that my
Netwave card is always recognised as a memory card. I've
followed the various instructions in the HOWTO and man pages
but no success.
Here is the output from the syslog for the initial load:

Intel PCIC probe:
  Ricoh RF5C296/396 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 1 socket
    host opts [0]: none
    ISA irqs (default) = 3 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: excluding 0x1330-0x1337 0x1388-0x138f 0x1730-0x
1737 0x1788-0x178f
cs: IO port probe 0x0100-0x04ff: excluding 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: unable to map card memory!
cs: unable to map card memory!
memory_cs: RequestWindow: Resource in use

And here is the output from dump_i365:

RicIntel PCIC probe: i82365sl B step found, 1 sockets
Socket 0:
  Identification and revision = 0x83
  Interface status = 0xff
    [bvd1/stschg] [bvd2/spkr] [detect] [wrprot] [ready] [poweron] [gpi]
  Power control = 0xd5
    [output] [Vcc=5v] [Vpp=5v]
  Interrupt and general control = 0x40
    [irq=0]
  Card status change = 00
   
  Card status change interrupt control = 0x08
    [detect] [irq = 0]
  Card detect and general control = 00
   
  Global control = 00
   
  Memory window 0: [OFF]
    start = 0000, stop = 0000, offset = 0000
  Memory window 1: [OFF]
    start = 0000, stop = 0000, offset = 0000
  Memory window 2: [OFF]
    start = 0000, stop = 0000, offset = 0000
  Memory window 3: [OFF]
    start = 0000, stop = 0000, offset = 0000
  Memory window 4: [OFF]
    start = 0000, stop = 0000, offset = 0000
  I/O window 0: [OFF]
    start = 0000, stop = 0x0001
  I/O window 1: [OFF]
    start = 0000, stop = 0x0001

Please help me.

Next-in-Thread Next Message

Select this message: Problems with 3.1.7 kernel 2.2.13 Redhat 6.0

Messages Inline: 1 All Outline: 1 2 All

1. None Looks like a goofed up /etc/pcmcia/config.opts file by David Hinds, 1999, Dec 20
(_ Sad What should it be? by dave_sneddon@excite.com, 1999, Dec 20

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]