Sad: Problems with 3.1.7 kernel 2.2.13 Redhat 6.0 

Forum: PCMCIA Installation and Configuration Issues
Date: 1999, Dec 19
From: dave_sneddon

I am having problems with an ISA to PCMCIA card, in that my Netwave card is always recognised as a memory card. I've followed the various instructions in the HOWTO and man pages but no success. Here is the output from the syslog for the initial load: Intel PCIC probe: Ricoh RF5C296/396 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 1 socket host opts [0]: none ISA irqs (default) = 3 polling interval = 1000 ms cs: IO port probe 0x1000-0x17ff: excluding 0x1330-0x1337 0x1388-0x138f 0x1730-0x 1737 0x1788-0x178f cs: IO port probe 0x0100-0x04ff: excluding 0x388-0x38f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: unable to map card memory! cs: unable to map card memory! memory_cs: RequestWindow: Resource in use And here is the output from dump_i365: RicIntel PCIC probe: i82365sl B step found, 1 sockets Socket 0: Identification and revision = 0x83 Interface status = 0xff [bvd1/stschg] [bvd2/spkr] [detect] [wrprot] [ready] [poweron] [gpi] Power control = 0xd5 [output] [Vcc=5v] [Vpp=5v] Interrupt and general control = 0x40 [irq=0] Card status change = 00 Card status change interrupt control = 0x08 [detect] [irq = 0] Card detect and general control = 00 Global control = 00 Memory window 0: [OFF] start = 0000, stop = 0000, offset = 0000 Memory window 1: [OFF] start = 0000, stop = 0000, offset = 0000 Memory window 2: [OFF] start = 0000, stop = 0000, offset = 0000 Memory window 3: [OFF] start = 0000, stop = 0000, offset = 0000 Memory window 4: [OFF] start = 0000, stop = 0000, offset = 0000 I/O window 0: [OFF] start = 0000, stop = 0x0001 I/O window 1: [OFF] start = 0000, stop = 0x0001 Please help me.

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

Looks like a goofed up /etc/pcmcia/config.opts file Re: Sad: Problems with 3.1.7 kernel 2.2.13 Redhat 6.0 Date: 1999, Dec 20 From: David Hinds <dhinds@pcmcia.sourceforge.org>

> cs: unable to map card memory! This implies that you have commented out or otherwise messed up all of the memory window definitions in the default /etc/pcmcia/config.opts file. How, exactly, have you modified this file? -- Dave

1. Sad: What should it be? by dave_sneddon@excite.com, 1999, Dec 20

[ Add Message ]  to: "Problems with 3.1.7 kernel 2.2.13 Redhat 6.0"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]