Next-in-Thread Next Message

None Looks like a goofed up /etc/pcmcia/config.opts file 

Forum: PCMCIA Installation and Configuration Issues
Re: Sad Problems with 3.1.7 kernel 2.2.13 Redhat 6.0
Date: 1999, Dec 20
From: David Hinds <>

> cs: unable to map card memory!

This implies that you have commented out or otherwise messed up all of
the memory window definitions in the default /etc/pcmcia/config.opts
file.  How, exactly, have you modified this file?

-- Dave

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 1 3 All

Sad What should it be?

Re: None Looks like a goofed up /etc/pcmcia/config.opts file (David Hinds)
Date: 1999, Dec 20
From: dave_sneddon

As I said, I've followed your advice in the HOWTO and tried
various addresses, to no avail. I've tried having the
netwave_cs line at the bottom uncommented, and this makes no
difference either.

This is my current file.

# Local PCMCIA Configuration File
# System resources available for PCMCIA devices
include port 0x100-0x4ff, port 0x1000-0x17ff
include memory 0xc0000-0xfffff, 0xa0000000-0xa0ffffff
# Extra port range for IBM Token Ring
include port 0xa00-0xaff
# Resources we should not use, even if they appear to be available
# First built-in serial port
exclude irq 4
# Second built-in serial port
#exclude irq 3
# First built-in parallel port
exclude irq 7
# Options for loadable modules
# To fix sluggish network with IBM ethernet adapter...
#module "pcnet_cs" opts "mem_speed=600"
# Options for Xircom Netwave driver...
#module "netwave_cs" opts "domain=0x100 scramble_key=0x0"
Looks like a goofed up /etc/pcmcia/config.opts file

Add Message to: "Looks like a goofed up /etc/pcmcia/config.opts file"

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10