Next-in-Thread Next Message

Sad What should it be? 

Forum: PCMCIA Installation and Configuration Issues
Re: Sad Problems with 3.1.7 kernel 2.2.13 Redhat 6.0
Re: None Looks like a goofed up /etc/pcmcia/config.opts file (David Hinds)
Date: 1999, Dec 20
From: dave_sneddon

As I said, I've followed your advice in the HOWTO and tried
various addresses, to no avail. I've tried having the
netwave_cs line at the bottom uncommented, and this makes no
difference either.

This is my current file.

# Local PCMCIA Configuration File
# System resources available for PCMCIA devices
include port 0x100-0x4ff, port 0x1000-0x17ff
include memory 0xc0000-0xfffff, 0xa0000000-0xa0ffffff
# Extra port range for IBM Token Ring
include port 0xa00-0xaff
# Resources we should not use, even if they appear to be available
# First built-in serial port
exclude irq 4
# Second built-in serial port
#exclude irq 3
# First built-in parallel port
exclude irq 7
# Options for loadable modules
# To fix sluggish network with IBM ethernet adapter...
#module "pcnet_cs" opts "mem_speed=600"
# Options for Xircom Netwave driver...
#module "netwave_cs" opts "domain=0x100 scramble_key=0x0"

Next-in-Thread Next Message

Select this message: What should it be?

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]