[ Next-in-Thread ]  [ Next Message ] 

Maybe an interrupt probe problem 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: PCMCIA modules fail to load during bootup (anup ochani)
Date: 1999, Dec 21
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

The PCMCIA-HOWTO has advice for debugging startup problems with the
PCMCIA drivers.  You can narrow down the problem by booting with no
cards inserted... if you still get a lock-up, the most likely problem
is an interrupt probe failure.  The HOWTO says how to deal with this.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Maybe an interrupt probe problem

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]