Older version(s) seems to work.

Ok: Older version(s) seems to work.

Forum: PCMCIA Installation and Configuration Issues
Re: Problems with Vadem VG-469 isa bridge (Steve Kann)
Date: 1999, Dec 15
From: Dan dan

My symptoms : kernel - 2.0.34 pcmcia - 3.1.x card - lucent ISA to pcmcia, single slot, based on vadem 469 chip computer - old 486-s 33/66/100 ... default setup/boot hung-up on cardmgr - I went to 'by-hand' mode... insmod of 'pcmcia_core' (no opts) worked insmod of 'i82365' (no opts) hangs, but machine OK, <CR> ok, ^C-s nogo (try many timing options consider debugging - nogo) lsmod at this point (from another window...) shows i82365 there, but not initialized. reboot...(often) My solution : peruse web and see many using this card OK, others not OK. try three different ISA motherboard machines, all same. try late 2.x.x release of pcmcia_cs from archives - my client drivers need 3.x.x (ug) try 3.0.13 pcmcia - wa-la - works so far... Thoughts from web notes (from others): somewhere between vadem support enabled and the current 3.x releases that some 'feature' was added (for 2.2.x+ kernels?) that busts the initialization of the vadem chip in this case. Thanks to all for help and advice. I hope this will save some others as much time as you all have saved me! Thanks for a great tool-kit Dave! --danno

[ Next-in-Thread ] [ Next Message ]

Select this message: Older version(s) seems to work.

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ] [ Subscribe ] [ No Admin Mode ]
[ Show Frames ] [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]
[ Edit This Forum ]