Next-in-Thread Next Message

Question 3.1.8 not finding interrupts 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Jan 18
From: Ian Soboroff isoboroff

I tried upgrading from 3.1.2 to 3.1.8 today (kernel version is 2.2.14). Under 3.1.2, there are no problems:

Linux PCMCIA Card Services 3.1.2
  kernel build: 2.2.14 #1 Thu Jan 6 10:07:52 EST 2000
  options:  [pci] [cardbus] [apm] [pnp]
PnP: PNP BIOS installation structure at 0xc00fdae0
PnP: PNP BIOS version 1.0, entry at f0000:423d, dseg at f0000
PCI routing table version 1.0 at 0xf5cd0
  00:0a.0 -> irq 10
  00:0a.1 -> irq 10
Intel PCIC probe: 
  Cirrus PD6832 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 2 sockets
    host opts [0]: [ring] [0/7/4] [3/17/4] [pci irq 10] [lat 168/176] [bus 32/34]
    host opts [1]: [ring] [0/7/4] [3/17/4] [pci irq 10] [lat 168/176] [bus 35/37]
    ISA irqs (scanned) = 3,4,5,7 PCI status changes
  Cirrus PD6729 PCI-to-PCMCIA at bus 1 slot 10, port 0xecfc, 2 sockets
    host opts [2]: [ring] [1/3/2] [1/9/2]
    host opts [3]: [ring] [1/3/2] [1/9/2]
    ISA irqs (default) = 3,4,5,7,12 polling interval = 1000 ms

but with 3.1.8, it only finds irq 5. the compile options are the same with both versions, as are the PCIC_OPTS, which are just "cs_irq=9". i tried adding "do_scan=0 irq_list=5,7,9,10" to the PCIC_OPTS for 3.1.8, but this didn't cure the problem.

any ideas?

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Other devices are using those interrupts by David Hinds, 2000, Jan 18

Add Message to: "3.1.8 not finding interrupts"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10