[ Next-in-Thread ]  [ Next Message ] 

Question: 3.1.8 not finding interrupts 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Jan 18
From: Ian Soboroff isoboroff

I tried upgrading from 3.1.2 to 3.1.8 today (kernel version is 2.2.14). Under 3.1.2, there are no problems: 

Linux PCMCIA Card Services 3.1.2
  kernel build: 2.2.14 #1 Thu Jan 6 10:07:52 EST 2000
  options:  [pci] [cardbus] [apm] [pnp]
PnP: PNP BIOS installation structure at 0xc00fdae0
PnP: PNP BIOS version 1.0, entry at f0000:423d, dseg at f0000
PCI routing table version 1.0 at 0xf5cd0
  00:0a.0 -> irq 10
  00:0a.1 -> irq 10
Intel PCIC probe: 
  Cirrus PD6832 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 2 sockets
    host opts [0]: [ring] [0/7/4] [3/17/4] [pci irq 10] [lat 168/176] [bus 32/34]
    host opts [1]: [ring] [0/7/4] [3/17/4] [pci irq 10] [lat 168/176] [bus 35/37]
    ISA irqs (scanned) = 3,4,5,7 PCI status changes
  Cirrus PD6729 PCI-to-PCMCIA at bus 1 slot 10, port 0xecfc, 2 sockets
    host opts [2]: [ring] [1/3/2] [1/9/2]
    host opts [3]: [ring] [1/3/2] [1/9/2]
    ISA irqs (default) = 3,4,5,7,12 polling interval = 1000 ms

but with 3.1.8, it only finds irq 5. the compile options are the same with both versions, as are the PCIC_OPTS, which are just "cs_irq=9". i tried adding "do_scan=0 irq_list=5,7,9,10" to the PCIC_OPTS for 3.1.8, but this didn't cure the problem.

any ideas?

[ Next-in-Thread ]  [ Next Message ] 

Select this message: 3.1.8 not finding interrupts

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Other devices are using those interrupts by David Hinds, 2000, Jan 18

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]