Next-in-Thread Next Message

Question Me too; please tell me exactly what you did 

Forum: PCMCIA Installation and Configuration Issues
Re: Question Unresolved symbols vs configuration parameters in 2.3.42 (Peter)
Date: 2000, Feb 08
From: cosmos

I experienced what you described on my Olivetti Echos 133DM
with Xircom REM56G, compiling 2.3.42 and pcmcia-cs 3.1.10.

Compiling kernel 2.3.X I set:

General setup -> PCMCIA/CardBus support -> PCMCIA/CardBus support M
General setup -> PCMCIA/CardBus support -> i82365 support Y
Network device support -> Network device support Y
Network device support -> Ethernet (10 or 100Mbit) Y
Character device -> PCMCIA character device support -> PCMCIA serial device support M
Character device -> PCMCIA character device support -> PCMCIA serial device support M

But there is a problem with loading the module (during boot phase) i823565.o,
there is an unresolved symbol: dead_socket

Please tell me how to modify i82365.c to go forward (and solve
next problems!).

Thank you very much.

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. More What I did by Peter, 2000, Feb 08

Add Message to: "Me too; please tell me exactly what you did"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10