Next-in-Thread Next Message

Warning 3.1.10 does no longer work on DELL Inspiron 7500 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Feb 11
From: Ronny Bremer rbremer

Hardware: DELL Inspiron 7500

The PCMCIA release 3.1.8 works and gives the following message at startup:

Feb 11 08:56:27 fghamw07 kernel: Linux PCMCIA Card Services 3.1.8 
Feb 11 08:56:27 fghamw07 kernel:   kernel build: 2.2.14 #4 Wed Feb 9 09:28:40 CET 2000 
Feb 11 08:56:27 fghamw07 kernel:   options:  [pci] [cardbus] [apm] [pnp] 
Feb 11 08:56:27 fghamw07 kernel: PnP: PNP BIOS installation structure at 0xc00f7210 
Feb 11 08:56:27 fghamw07 kernel: PnP: PNP BIOS version 1.0, entry at f0000:a776, dseg at 400 
Feb 11 08:56:27 fghamw07 kernel: PCI routing table version 1.0 at 0xfdf50 
Feb 11 08:56:27 fghamw07 kernel:   00:04.0 -> irq 11 
Feb 11 08:56:27 fghamw07 kernel:   00:04.1 -> irq 11 
Feb 11 08:56:27 fghamw07 kernel: Intel PCIC probe:  
Feb 11 08:56:27 fghamw07 kernel:   TI 1225 PCI-to-CardBus at bus 0 slot 4, mem 0x68000000, 2 sockets 
Feb 11 08:56:27 fghamw07 kernel:     host opts [0]: [ring] [pwr save] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 32/34] 
Feb 11 08:56:27 fghamw07 kernel:     host opts [1]: [ring] [pwr save] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 35/37] 
Feb 11 08:56:27 fghamw07 kernel:     ISA irqs (scanned) = 9,10 polling interval = 1000 ms 
Feb 11 08:56:28 fghamw07 cardmgr[434]: starting, version is 3.1.8

When using 3.1.10 however, the output stops with the line:

ISA irqs (scanned) = 3,4,7,9,10

and the systems freezes. I cannot interrupt anything, it is dead stopped. I tried multiple times, same effect. As you can see, the list of detected interrupts did change, I do no know why, since my config files are identical (in terms of the excluded and included resources).

Any help would be appreciated.

Ronny

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 1 2 All

Warning 3.1.9 / 3.1.10 Broken for IBM ThinkPad i1460

Re: Warning 3.1.10 does no longer work on DELL Inspiron 7500 (Ronny Bremer)
Date: 2000, Feb 15
From: Kenny Jansson kenson

I have the exact same problem as Ronny but with my ThinkPad i1460. It works with 3.1.8 but freezes while (or after) scanning IRQ's in 3.1.9 and 3.1.10.

This is during insmod of i82365.o

With 3.1.8 it detects a O2Micro OZ6812 PCI-to-CardBus at slot 19 and with 3.1.10 it detects the same thing at slot 00:13. and after the IRQ (defaults) the machine freezes.

/Kenny

1. Note PnP is enabled by Ronny Bremer, 2000, Feb 17
(_ Ok tried beta, works :) by Ronny Bremer, 2000, Feb 25
3.1.10 does no longer work on DELL Inspiron 7500


Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]