[ Next-in-Thread ]  [ Next Message ] 

Ok: Seems to be solved...(Fujitsu C6325 now working) 

Forum: PCMCIA Installation and Configuration Issues
Re: Sad: Pcmcia problems on Fujitsu lifebook (TI PCI1225) (Wolfgang Wegner)
Re: Memory window is too small (David Hinds)
Date: 2000, Mar 03
From: Wolfgang Wegner Wolfgang

Hi all,

The problem seems to be solved now.

I think i was a bit blind again... In the rare cases the system "un-freezed" after removing the card, the tulip_cb module was still used (and thus not unloaded), and all subsequent card insertions did not use the ioport 0x200 used upon first card insetion but port 0x280 instead.

So i just changed the config to not use the port range from 0x200 but from 0x280 and now all works. I am still not sure what conflict i ran into, but whatever it was, it is in the region 0x200-0x27f.

Best regards, Wolfgang

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Seems to be solved...(Fujitsu C6325 now working)

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]