Next-in-Thread Next Message

Question Install and config of Linksys desktop PCMRDWR reader writer and PCM100H1 card 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Feb 26
From: Jeff Gembler jeffrey.gembler

CONTENTS

  WHAT I WANT
    [ PCMCIA DEVICES THAT I WANT TO USE ]

  MY QUESTIONS

  SOME BACKGROUND
    [ WHY I BELIVE I HAVE A CHANCE OF MAKING THIS WORK ]
    [ WHAT I HAVE DONE SO FAR ]
    [ A NOTE ABOUT THE VIA VT83C469 ]

  COMMAND OUTPUT  &  FILE LISTINGS  &  DIRECTORY LISTINGS
    [ Command output: probe -v ]
    [ Command output: probe -m ]
    [ Command output: lsmod ]

    [ File listing: /proc/modules ]
    [ File listing: /proc/ioports ]
    [ File listing: /proc/devices ]
    [ File listing: /proc/interrupts ]
    [ File listing: /etc/pcmcia/config ]
    [ File listing: /etc/pcmcia/config.opts ]

    [ File listing: /var/log/messages ]

    [ Dir listing: /lib/modules/pcmcia,  using ls -lF ]



***************************************************************************
*  WHAT I WANT
*    [ PCMCIA DEVICES THAT I WANT TO USE ]
***************************************************************************

[ PCMCIA DEVICES THAT I WANT TO USE ]
I need help in installing and configuring the following two items

1) PC desktop internal dual-slot PCMCIA reader writer 
   ( Linksys ProConnect(r) PCMCIA Card Reader/Writer,  Model No. PCMRDWR )
   This device uses the VIA VT83C469 controller  -  
   I verified this by looking at the chip on the board.

   Note: This is a two-slot reader writer

2) PCMCIA card
   ( Linksys HomeLink(tm) Phoneline + 10/100 Network PC Card, 
   Model No. PCM100H1 )
   This is an Eth network PCMCIA card that also does HomePNA (HPNA).



**************************************************************************
*  MY QUESTIONS
*
**************************************************************************

What help can you give me here, how do I get this working?

Are the PCMCIA drivers stable and usable for what I want to do?

Where, specifically, are the driver modules or files that support
the Linksys internal PCMCIA reader writer Model No. PCMRDWR

Where, specifically, are the driver modules or files that support
the Linksys Eth/HPNA card Model No. PCM100H1

I didn't rebuild the kernel (at least don't thing I did).
The only make commands that I executed where for the PCMCIA build.
So, the kernel and PCMCIA should be in sync ?
So no need to look into the CONFIG_MODVERSIONS kernel option?

The way things are right now, I don't get any beeps on plugging in
or removing a PCMCIA card.  Should I?

I've been looking at all the HOWTO's and man pages that I can find
that might help.  Are there some that I should be reading?

Doesn't seem to be any books on Linux that go into PCMCIA in much
detail, even less on desktop (instead of laptop) PCMCIA.
Is there anything out there?

Should I be able to 
verify the PCMCIA reader/writer is present (by reading registers, etc.),
verify that the PCMCIA card is present (by reading registers, etc.) ?

In  /etc/sysconfig/pcmcia

If there is more that one option for PCIC_OPTS, should they be 
comma separated on the same line,  or should/can different lines
be used like:
  PCIC_OPTS="   "
  PCIC_OPTS="   "
  PCIC_OPTS="   "



**************************************************************************
*  SOME BACKGROUND
*    [ WHY I BELIVE I HAVE A CHANCE OF MAKING THIS WORK ]
*    [ WHAT I HAVE DONE SO FAR ]
*    [ A NOTE ABOUT THE VIA VT83C469 ]
**************************************************************************

[ WHY I BELIVE I HAVE A CHANCE OF MAKING THIS WORK ]
I believe that I have a chance in doing this (install and configure. . .) 
PCMCIA because 

1) PCMCIA card services 3.1.11  has the file PCMCIA-HOWTO 
   (Linux PCMCIA HOWTO v2.52 18 Feb 2000),  and in Section 1.4 
   is says that the VIA VT83C469 controller is recognized by the 
   supplied socket drivers.

2) PCMCIA card services 3.1.11  has the file SUPPORTED.CARDS 
   (Linux PCMCIA Supported Device List  2000 02 18  01:24:13)
   which lists (as a supported device):

     Fast Ethernet (10/100baseT) 
       Linksys PCMPC100 EtherFast, PCM100H1 HomeLink 10/100
       (guess that's two different Linksys cards)
 

[ WHAT I HAVE DONE SO FAR ]
So far,  I have done the following:

1) Installed Redhat Linux 6.0 onto a PC using the
   AMD K6-2 450 MHz processor.
2) Installed an Ethernet card which has the 
   Pcnet(tm)-FAST+  AMD  Am79C972  Eth controller.
3) Installed an Eth/HPNA card which has the 
   PCnet(tm)-Home  AMD  Am79C978  controller.

   (the PCI Eth cards are working, so is the IP MASQ and ipchains stuff)

4) Physically installed the Linksys internal PCMCIA reader writer

5) Physically plugged a Linksys PCM100H1 PCMCIA card into the reader writer

6) Downloaded source and built objects for PCMCIA
   (I have listings of the build process if anyone want to see them)
   - download pcmcia-cs-3.1.11.tar.gz   to /usr/src
   - gunzip -d pcmcia-cs-3.1.11.tar.gz
   - tar -xvf pcmcia-cs-3.1.11.tar
     ( So now the PCMCIA sources exist in /usr/src/pcmcia-cs.3.1.11 )

   - from /usr/src/pocmcia-cs-3.1.11
       make config   (enter)
       ...
       Configuration successful

       make all      (enter)
       (looks like it went ok)

       make install  (enter)
       (looks like it went ok)


7) Changed /etc/sysconfig/pcmcia

   PCMCIA="Yes"
   PCIC="i82365"
   PCIC_OPTS="extra_sockets=1"
   CORE_OPTS=



[ A NOTE ABOUT THE VIA VT83C469 ]
In the VT83C469 PCMCIA Socket Controller Data Sheet,
it says "Register - compatible with INTEL 82365SL"

So,  I thing that I did the correct thing in /etc/sysconfig/pcmcia
in entering  PCIC="i82365" 



**************************************************************************
*  COMMAND OUTPUT  &  FILE LISTINGS  &  DIRECTORY LISTINGS
*    
*   [ Command output: probe -v ]
*   [ Command output: probe -m ]
*   [ Command output: lsmod ]
*
*   [ File listing: /proc/modules ]
*   [ File listing: /proc/ioports ]
*   [ File listing: /proc/devices ]
*   [ File listing: /proc/interrupts ]
*   [ File listing: /etc/pcmcia/config ]
*   [ File listing: /etc/pcmcia/config.opts ]
*
*   [ File listing: /var/log/messages ]
*
*   [ Dir listing: /lib/modules/pcmcia,  using ls -lF ]
*
**************************************************************************

[ Command output: probe -v ]
PCI bridge probe: not found
Intel PCIC probe:
  ident(0)=0xff
  not found.
Databook TCID-2 probe: not found


[ Command output: probe -m ]
(There is no output from this command).


[ Command output: lsmod ]
Module                  Size  Used by
nfsd                  150936   8  (autoclean)
lockd                  30856   1  (autoclean) [nfsd]
sunrpc                 52356   1  (autoclean) [nfsd lockd]
pcmcia_core            42624   0 
pcnet32                 7784   1  (autoclean)
pcnethme               15152   1  (autoclean)


[ File listing: /proc/modules ]
nfsd                  150936   8 (autoclean)
lockd                  30856   1 (autoclean) [nfsd]
sunrpc                 52356   1 (autoclean) [nfsd lockd]
pcmcia_core            42624   0
pcnet32                 7784   1 (autoclean)
pcnethme               15152   1 (autoclean)


[ File listing: /proc/ioports ]
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
e000-e007 : ide0
e008-e00f : ide1
e800-e81f : PCnet/Home 79C978
ec00-ec17 : PCnet/FAST+ 79C972


[ File listing: /proc/devices ]
Character devices:
  1 mem
  2 pty
  3 ttyp
  4 ttyS
  5 cua
  7 vcs
 10 misc
 29 fb
 36 netlink
128 ptm
136 pts

Block devices:
  1 ramdisk
  2 fd
  3 ide0
  9 md
 22 ide1


[ File listing: /proc/interrupts ]
CPU0       
  0:     294018          XT-PIC  timer
  1:       4023          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:         31          XT-PIC  PCnet/Home 79C978
  8:          2          XT-PIC  rtc
 10:      60107          XT-PIC  PCnet/FAST+ 79C972
 12:      26798          XT-PIC  PS/2 Mouse
 13:          1          XT-PIC  fpu
 14:      90483          XT-PIC  ide0
 15:          7          XT-PIC  ide1
NMI:          0



[ File listing: /etc/pcmcia/config ]
#
# PCMCIA Card Configuration Database
#
# config 1.111 2000/02/11 04:43:10 (David Hinds)
#

# config.opts is now included at the very end

#
# Device driver definitions
#
device "3c589_cs"
  class "network" module "3c589_cs"

device "ibmtr_cs"
  class "network" module "ibmtr_cs"

device "nmclan_cs"
  class "network" module "nmclan_cs"

device "oti12_cs"
  class "cdrom" module "oti12_cs"

device "pcnet_cs"
  class "network" module "net/8390", "pcnet_cs"

device "smc91c92_cs"
  class "network" module "smc91c92_cs"

device "wavelan_cs"
  class "network" module "wavelan_cs"

device "wvlan_cs"
  class "network" module "wvlan_cs"

device "memory_cs" needs_mtd
  class "memory" module "memory_cs"

device "ftl_cs" needs_mtd
  class "ftl" module "ftl_cs"

device "serial_cs"
  class "serial" module "serial_cs"

device "parport_cs"
  class "parport" module "parport_cs"

device "qlogic_cs"
  class "scsi" module "qlogic_cs"

device "aha152x_cs"
  class "scsi" module "aha152x_cs"

device "fdomain_cs"
  class "scsi" module "fdomain_cs"

device "sym53c500_cs"
  class "scsi" module "sym53c500_cs"

device "ide_cs"
  class "ide" module "ide_cs"

device "fmvj18x_cs"
  class "network" module "fmvj18x_cs" 

device "netwave_cs"
  class "network" module "netwave_cs"

device "xirc2ps_cs"
  class "network" module "xirc2ps_cs"

device "iscc_cs"
  class "iscc" module "iscc_cs"

device "3c574_cs"
  class "network" module "3c574_cs"

device "teles_cs"
  class "teles" module "teles_cs"

device "3c575_cb"
  class "network" module "cb_enabler", "3c575_cb"

device "apa1480_cb"
  class "scsi" module "cb_enabler", "apa1480_cb"

device "tulip_cb"
  class "network" module "cb_enabler", "tulip_cb"

device "memory_cb"
  class "memory" module "cb_enabler", "memory_cb"

device "epic_cb"
  class "network" module "cb_enabler", "epic_cb"

device "serial_cb"
  class "serial" module "cb_enabler", "serial_cb"

device "ray_cs"
  class "network" module "ray_cs"

device "airo_cs"
  class "network" module "airo", "airo_cs"
#
# Ethernet adapter definitions
#
card "2412LAN Ethernet"
  version "2412LAN"
  bind "pcnet_cs"

card "3Com 589 Ethernet"
  manfid 0x0101, 0x0589
  bind "3c589_cs"

card "Accton EN2212 Ethernet"
  version "ACCTON", "EN2212"
  bind "pcnet_cs"

card "Accton EN2216 Ethernet"
  version "ACCTON", "EN2216-PCMCIA-ETHERNET"
  bind "pcnet_cs"

card "Accton UE2212 Ethernet"
  version "PCMCIA", "UE2212"
  bind "pcnet_cs"

card "Accton UE2216 Ethernet"
  version "PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216"
  bind "pcnet_cs"

card "Allied Telesis LA-PCM Ethernet"
  manfid 0xc00f, 0x0002
  cis "cis/LA-PCM.dat"
  bind "pcnet_cs"

card "AmbiCom AMB8002 Ethernet"
  version "AmbiCom Inc", "AMB8002"
  bind "pcnet_cs"

card "AmbiCom AMB8002T Ethernet"
  version "AmbiCom Inc", "AMB8002T"
  bind "pcnet_cs"

card "AmbiCom AMB8010 Ethernet"
  version "AmbiCom Inc", "AMB8010"
  bind "pcnet_cs"

card "AnyCom ECO Ethernet"
  version "AnyCom", "ECO Ethernet"
  bind "pcnet_cs"

card "Argosy EN210 Ethernet"
  version "PCMCIA LAN", "Ethernet"
  bind "pcnet_cs"

card "Asante FriendlyNet Ethernet"
  version "ASANTE", "FriendlyNet PC Card"
  bind "pcnet_cs"

card "Billionton LNT-10TB"
  version "Billionton", "LNT-10TB"
  bind "pcnet_cs"

card "Billionton LNT-10TN"
  version "PCMCIA", "LNT-10TN"
  bind "pcnet_cs"

card "California Access Ethernet"
  version "PCMCIAs", "ComboCard"
  bind "pcnet_cs"

card "CeLAN Ethernet"
  version "PCMCIA", "ETHERNET V1.0"
  bind "pcnet_cs"

card "CentreCOM LA-PCM V2 Ethernet"
  version "Allied Telesis, K.K.", "CentreCOM LA-PCM_V2"
  bind "pcnet_cs"

card "CNet CN30BC Ethernet"
  version "CNet  ", "CN30BC", "ETHERNET"
  bind "pcnet_cs"

card "CNet CN40BC Ethernet"
  version "CNet", "CN40BC Ethernet"
  bind "pcnet_cs"

card "Compaq Ethernet"
  version "Compaq", "Ethernet LAN Card"
  bind "xirc2ps_cs"

card "Compaq Netelligent 10/100 Ethernet"
  version "Compaq", "Netelligent 10/100 PC Card"
  bind "xirc2ps_cs"

card "COMPU-SHACK BASEline Ethernet"
  version "COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter"
  bind "pcnet_cs"

card "Connectware LANdingGear Ethernet"
  manfid 0x0057, 0x1004
  bind "pcnet_cs"

card "CONTEC Ethernet"
  version "CONTEC Co.,Ltd."
  bind "fmvj18x_cs"

card "Corega PCC-T Ethernet"
  version "corega K.K.", "corega Ether PCC-T"
  bind "pcnet_cs"

card "Corega PCC-T Ethernet"
  version "corega,K.K.", "Ethernet LAN Card"
  bind "pcnet_cs"

card "Corega PCM-T Ethernet"
  version "Corega,K.K.", "Ethernet LAN Card"
  bind "pcnet_cs"

card "CyQ've 10baseT Ethernet"
  version "CyQ've 10 Base-T LAN CARD"
  bind "pcnet_cs"

card "CyQ've ELA-010 Ethernet"
  version "CyQ've", "ELA-010"
  bind "pcnet_cs"

card "Danpex EN-6200P2 Ethernet"
  version "*", "EN-6200P2"
  bind "pcnet_cs"

card "DataTrek NetCard Ethernet"
  version "DataTrek.", "NetCard "
  bind "pcnet_cs"

card "Dayna Commnunications CommuniCard E Ethernet"
  version "Dayna Communications, Inc.", "CommuniCard E"
  bind "pcnet_cs"

card "Digital DEPCM-BA Ethernet"
  version "DIGITAL", "DEPCM-XX"
  bind "pcnet_cs"

card "Digital PCP78-AC Ethernet"
  version "Digital", "Ethernet", "Adapter"
  bind "pcnet_cs"

card "D-Link DE-650 Ethernet"
  version "D-Link", "DE-650"
  bind "pcnet_cs"

card "D-Link DFE-650 Ethernet"
  version "D-Link", "DFE-650"
  bind "pcnet_cs"

card "D-Link DE-660 Ethernet"
  version "D-Link", "DE-660"
  bind "pcnet_cs"

card "D-Link DE-650 Ethernet"
  tuple 0x40, 0x0009, "D-Link PC Ethernet Card"
  bind "pcnet_cs"

card "DynaLink L10C Ethernet"
  version "DYNALINK", "L10C"
  bind "pcnet_cs"

card "E2000 NE2000-Compatible Ethernet"
  version "Ethernet Adapter", "E2000 PCMCIA Ethernet"
  bind "pcnet_cs"

card "Eagle NE200 Ethernet"
  manfid 0x0004, 0x0004
  bind "fmvj18x_cs"

card "Edimax Ethernet Combo"
  version "Edimax Technology Inc.", "PCMCIA", "Ethernet Card"
  bind "pcnet_cs"

card "EFA 207 Ethernet"
  version "EFA   ", "EFA207", "ETHERNET"
  bind "pcnet_cs"

card "Eiger Labs EPX-ET10T2 Ethernet"
  version "EIGER Labs Inc.", "Ethernet Combo card"
  bind "pcnet_cs"

card "Eiger Labs EPX-ET10BT Ethernet"
  version "EIGER Labs Inc.", "Ethernet 10BaseT card"
  bind "pcnet_cs"

card "Eiger Labs EPX-10BT Ethernet"
  version "Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT"
  bind "fmvj18x_cs"

card "Eiger Labs EPX-ET 10BT Ethernet"
  version "Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT"
  bind "fmvj18x_cs"

card "ELECOM Laneed LD-CDF"
  version "Laneed", "LD-CDF"
  bind "pcnet_cs"

card "EZLink 4109 Ethernet"
  version "PCMCIA", "Ethernet Card"
  bind "pcnet_cs"

card "EP-210 Ethernet"
  version "Ethernet PCMCIA adapter", "EP-210"
  bind "pcnet_cs"

card "EP-210 Ethernet"
  version "EP-210 PCMCIA LAN CARD."
  bind "pcnet_cs"

card "EP-220 Ethernet"
  version "PCMCIA", "ETHERNET"
  bind "pcnet_cs"

card "Epson EEN10B Ethernet"
  version "Seiko Epson Corp.", "Ethernet"
  bind "pcnet_cs"

card "Farallon ENet"
  version "Farallon", "ENet"
  bind "3c589_cs"

card "Fujitsu FMV-J181 Ethernet"
  version "PCMCIA MBH10302"
  bind "fmvj18x_cs"

card "Fujitsu FMV-1080 Ethernet"
  version "FUJITSU", "MBH10308"
  bind "fmvj18x_cs"

card "Fujitsu FMV-J182 Ethernet"
  version "FUJITSU", "LAN Card(FMV-J182)"
  bind "fmvj18x_cs"

card "Fujitsu Towa LA501 Ethernet"
  version "FUJITSU TOWA", "LA501"
  bind "fmvj18x_cs"

card "Grey Cell GCS2000 Ethernet"
  version "Grey Cell", "GCS2000"
  bind "pcnet_cs"

card "Grey Cell GCS2220 Ethernet"
  version "Grey Cell", "GCS2220"
  bind "pcnet_cs"

card "GVC NIC-2000P Ethernet"
  version "GVC", "NIC-2000p"
  bind "pcnet_cs"

card "GVC NIC-2000P Ethernet"
  version "PCMCIA", "Ethernet Combo card"
  bind "pcnet_cs"

card "Hitachi HT-4840-11 Ethernet"
  version "HITACHI", "HT-4840-11"
  bind "fmvj18x_cs"

card "Hypertec EP401 Ethernet"
  version "Hypertec", "*", "EP401"
  bind "pcnet_cs"

card "IBM Credit Card Ethernet"
  version "IBM Corp.", "Ethernet"
  bind "pcnet_cs"

card "IC-Card Ethernet"
  version "IC-CARD", "IC-CARD"
  bind "pcnet_cs"

card "IC-Card Plus Ethernet"
  version "IC-CARD+", "IC-CARD+"
  bind "pcnet_cs"

card "Kansai KLA-PCM/T Ethernet"
  version "KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T"
  bind "pcnet_cs"

card "Katron PE-520 Ethernet"
  version "KCI", "PE520 PCMCIA Ethernet Adapter"
  bind "pcnet_cs"

card "KingMax Technology Ethernet"
  version "KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card"
  bind "pcnet_cs"

card "KingMax Technology Ethernet"
  version "KingMax Technology Inc.", "*", "Ethernet Card"
  bind "pcnet_cs"

card "KingMax Technology Ethernet"
  version "KINGMAX", "EN10T2T"
  bind "pcnet_cs"

card "Kingston KNE-PCM/x Ethernet"
  version "Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter"
  bind "pcnet_cs"

card "Kingston KNE-PC2 Ethernet"
  version "Kingston", "KNE-PC2"
  bind "pcnet_cs"

card "KTI PE-520 Plus Ethernet"
  version "KTI", "PE520 PLUS"
  cis "cis/PE520.dat"
  bind "pcnet_cs"

card "Linksys Ethernet"
  tuple 0x40, 0x0009, "E-CARD PC Ethernet Card"
  cis "cis/E-CARD.dat"
  bind "pcnet_cs"

card "Linksys Ethernet"
  version "LINKSYS", "E-CARD"
  bind "pcnet_cs"

card "Linksys Ethernet"
  version "E-CARD", "E-CARD"
  bind "pcnet_cs"

card "Linksys Ethernet"
  version "Linksys", "Combo PCMCIA EthernetCard (EC2T)"
  bind "pcnet_cs"

card "Longshine ShineNet LCS-8534 Ethernet"
  version "LONGSHINE", "PCMCIA Ethernet Card"
  bind "pcnet_cs"

card "Longshine ShineNet LCS-8534 Ethernet"
  version "LONGSHINE", "*", "EP401"
  bind "pcnet_cs"

card "Logitec LPM-LN10BA Ethernet"
  version "Cardwell", "PCMCIA", "ETHERNET"
  bind "pcnet_cs"

card "Logitec LPM-LN20T Ethernet"
  version "Logitec", "LPM-LN20T"
  bind "pcnet_cs"

card "MACNICA Ethernet"
  version "MACNICA", "ME1-JEIDA"
  bind "pcnet_cs"

card "Maxtech PCN2000 Ethernet"
  version "MAXTECH", "PCN2000"
  bind "pcnet_cs"

card "Megahertz CC10BT/2 Ethernet"
  version "Megahertz", "CC10BT/2"
  bind "smc91c92_cs"

card "Melco LPC2-T Ethernet"
  manfid 0x01bf, 0x2216
  bind "pcnet_cs"

card "Microdyne NE4200 Ethernet"
  version "Microdyne", "NE4200"
  bind "pcnet_cs"

card "Midori LT-PCMT Ethernet"
  version "MIDORI ELEC.", "LT-PCMT"
  bind "pcnet_cs"

card "National Semiconductor InfoMover 4100 Ethernet"
  version "National Semiconductor", "InfoMover 4100"
  bind "pcnet_cs"

card "National Semiconductor InfoMover NE4100 Ethernet"
  version "National Semiconductor", "InfoMover NE4100"
  bind "pcnet_cs"

card "NEC PC-9801N-J12 Ethernet"
  version "NEC", "PC-9801N-J12"
  bind "pcnet_cs"

card "New Media Ethernet"
  version "New Media Corporation", "Ethernet"
  bind "nmclan_cs"

card "New Media BASICS Ethernet"
  version "BASICS by New Media Corporation", "Ethernet", "SMC91C94"
  bind "smc91c92_cs"

card "New Media LanSurfer"
  manfid 0x0057, 0x0021
  bind "pcnet_cs"

card "NextCom NC5310 Ethernet"
  version "NextComK.K.", "NC5310 Ver1.0        "
  bind "fmvj18x_cs"

card "NE2000 Compatible Ethernet"
  version "PCMCIA", "Ethernet"
  bind "pcnet_cs"

card "NE2000 Compatible Ethernet"
  version "PCMCIA", "Ethernet 10BaseT Card"
  bind "pcnet_cs"

card "NE2000 Compatible Ethernet"
  version "NE2000 Compatible", "PCMCIA", "Ethernet Card"
  bind "pcnet_cs"

card "NE2000 Compatible Ethernet"
  version "Ethernet", "Adapter"
  bind "pcnet_cs"

card "NE2000 Compatible Ethernet"
  manfid 0x0149, 0xc1ab
  bind "pcnet_cs"

card "NDC Instant-Link Ethernet"
  version "NDC", "Ethernet"
  cis "cis/NE2K.dat"
  bind "pcnet_cs"

card "Novell Eagle 200T Ethernet"
  version "EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04"
  bind "fmvj18x_cs"

card "Ositech Four of Diamonds Ethernet"
  version "Ositech", "Trumpcard:Four of Diamonds Ethernet"
  bind "smc91c92_cs"

card "IO DATA PCLA/T Ethernet"
  version "I-O DATA", "PCLA", "ETHERNET"
  bind "pcnet_cs"

card "IO DATA PCLA/TE Ethernet"
  version "IO DATA", "PCLATE", "ETHERNET"
  bind "pcnet_cs"

card "Panasonic CF-VEL211 Ethernet"
  version "Matsushita Electric Industrial Co.,LTD.", "CF-VEL211"
  bind "pcnet_cs"

card "PreMax PE-200 Ethernet"
  version "PMX   ", "PE-200"
  cis "cis/PE-200.dat"
  bind "pcnet_cs"

card "Psion Gold Card Ethernet"
  version "Psion Dacom", "Gold Card Ethernet"
  bind "pcnet_cs"

card "RATOC Ethernet"
  version "PCMCIA LAN MBH10304  ES"
  bind "fmvj18x_cs"

card "RATOC REX-R280 Ethernet"
  version "RATOC System Inc.", "10BASE_T CARD R280"
  bind "fmvj18x_cs"

card "Relia RE2408T Ethernet"
  version "PCMCIA LAN", "Ethernet"
  bind "pcnet_cs"

card "Reliasys 2400A Ethernet"
  version "=RELIA==", "Ethernet"
  bind "pcnet_cs"

card "RPTI EP400 Ethernet"
  version "RPTI LTD.", "EP400"
  bind "pcnet_cs"

card "RPTI EP400 Ethernet"
  version "RPTI", "EP400 Ethernet NE2000 Compatible"
  bind "pcnet_cs"

card "RPTI EP401 Ethernet"
  version "RPTI", "EP401 Ethernet NE2000 Compatible"
  bind "pcnet_cs"

card "RPTI 1625B Ethernet"
  version "RP", "1625B Ethernet NE2000 Compatible"
  bind "pcnet_cs"

card "SCM Ethernet Combo"
  version "SCM", "Ethernet Combo card"
  bind "pcnet_cs"

card "Sky Link Express"
  version "2408LAN", "Ethernet"
  bind "pcnet_cs"

card "SMC EtherEZ Ethernet"
  version "SMC", "EtherEZ Ethernet 8020"
  bind "smc91c92_cs"

card "SMC EZCard-10 Ethernet"
  version "SMC", "EZCard-10-PCMCIA"
  bind "pcnet_cs"

card "Socket EA Ethernet"
  version "Socket Communications Inc",
    "Socket EA PCMCIA LAN Adapter Revision D"
  bind "pcnet_cs"

card "Socket EA Ethernet"
  version "Socket Communications Inc",
    "Socket EA PCMCIA LAN Adapter Revision E"
  bind "pcnet_cs"

card "Socket LP-E Ethernet"
  manfid 0x0104, 0x000d
  bind "pcnet_cs"

card "Socket LP-E CF+ Ethernet"
  manfid 0x0104, 0x0075
  bind "pcnet_cs"

card "SuperSocket Ethernet"
  version "Telecom Device K.K.", "SuperSocket RE450T"
  bind "pcnet_cs"

card "Surecom Ethernet"
  version "TAMARACK", "Ethernet"
  bind "pcnet_cs"

card "TDK LAC-CD02x Ethernet"
  version "TDK", "LAC-CD02x"
  bind "fmvj18x_cs"

card "Xircom IIps Ethernet"
  version "Xircom", "*", "PS-CE2-10"
  bind "xirc2ps_cs"

card "Xircom RE-10 Ethernet"
  version "Xircom", "*", "RE-10"
  bind "xirc2ps_cs"

#
# 10/100baseT network adapters
#
card "3Com 572/574 Fast Ethernet"
  manfid 0x0101, 0x0574
  bind "3c574_cs"

card "Abocom LinkMate FE1000 Fast Ethernet"
  version "Fast Ethernet", "Adapter"
  bind "pcnet_cs"

card "Accton Fast EtherCard-16"
  manfid 0x01bf, 0x010a
  bind "xirc2ps_cs"

card "AnyCom ECO 10/100 Fast Ethernet"
  version "AnyCom", "ECO Ethernet 10/100"
  bind "pcnet_cs"

card "Argosy EN220 Fast Ethernet"
  version "ARGOSY", "Fast Ethernet PCCard"
  bind "smc91c92_cs"

card "COMPU-SHACK FASTline 10/100 Fast Ethernet"
  version "COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet"
  bind "pcnet_cs"

card "Corega PCC-TX Fast Ethernet"
  version "corega K.K.", "corega FastEther PCC-TX"
  bind "pcnet_cs"

card "D-Link Fast Ethernet"
  version "ETHER-C16"
  bind "pcnet_cs"

card "Dynalink L100C Fast Ethernet"
  version "DYNALINK", "L100C"
  bind "smc91c92_cs"

card "Farallon Enet"
  version "Farallon", "Farallon Enet"
  bind "smc91c92_cs"

card "Intel EtherExpress PRO/100"
  version "Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16"
  bind "xirc2ps_cs"

card "IO DATA PCET/TX Fast Ethernet"
  version "IO DATA", "PCETTX"
  bind "pcnet_cs"

card "KTI ETHER-C16 Fast ethernet"
  manfid 0x0149, 0x0230
  bind "pcnet_cs"

card "Laneed LD-10/100CD Fast Ethernet"
  version "Laneed", "LD-10/100CD"
  bind "pcnet_cs"

card "Linksys EtherFast 10/100 Fast Ethernet"
  version "Linksys", "EtherFast 10/100 PC Card (PCMPC100)"
  bind "pcnet_cs"

card "Logitec LPM-LN100TX Fast Ethernet"
  version "Logitec", "LPM-LN100TX"
  bind "pcnet_cs"

card "Melco LPC2-TX Fast Ethernet"
  version "MELCO", "LPC2-TX"
  bind "pcnet_cs"

card "Melco/SMC LPC-TX Fast Ethernet"
  version "MELCO/SMC", "LPC-TX"
  bind "smc91c92_cs"

card "Microcom C.E. Travel Card 10/100 Fast Ethernet"
  version "Microcom C.E.", "Travel Card LAN 10/100"
  bind "pcnet_cs"

card "NetGear FA410TXC Fast Ethernet"
  version "NETGEAR", "FA410TX"
  bind "pcnet_cs"

card "Ositech Seven of Diamonds Fast Ethernet"
  version "Ositech", "Trumpcard:Seven of Diamonds Ethernet"
  bind "smc91c92_cs"

card "NE2000 Compatible Fast Ethernet"
  version "PCMCIA", "10/100 Ethernet Card"
  bind "pcnet_cs"

card "NE2000 Compatible Fast Ethernet"
  version "PCMCIA", "FAST ETHERNET CARD"
  bind "pcnet_cs"

card "Planex FNW-3600T Fast Ethernet"
  version "Fast Ethernet", "Adapter"
  bind "pcnet_cs"

card "Toshiba Advanced Network Fast Ethernet"
  version "Toshiba Information Systems", "*", "TPCENET"
  bind "xirc2ps_cs"

card "Toshiba 10/100 Fast Ethernet"
  version "Toshiba", "10/100 Ethernet PC Card"
  bind "xirc2ps_cs"

#Conflicts with Kingston KNE-PC2!
#card "WiseCom WC-PC400 Fast Ethernet"
#  manfid 0x0186, 0x0100
#  bind "smc91c92_cs"

card "Xircom CE3-10/100 Fast Ethernet"
  version "Xircom", "*", "CE3-10/100"
  bind "xirc2ps_cs"

#
# Wireless network adapters
#
card "Aironet PC4500"
  manfid 0x015f, 0x0005
  bind "airo_cs"

card "Aironet PC4800"
  manfid 0x015f, 0x0007
  bind "airo_cs"

card "AT&T WaveLAN Adapter"
  version "AT&T", "WaveLAN/PCMCIA"
  bind "wavelan_cs"

card "Cabletron RoamAbout 802.11 DS"
  version "Cabletron", "RoamAbout 802.11 DS"
  bind "wvlan_cs"

card "Digital RoamAbout/DS"
  version "Digital", "RoamAbout/DS"
  bind "wavelan_cs"

card "Lucent Technologies WaveLAN Adapter"
  version "Lucent Technologies", "WaveLAN/PCMCIA"
  bind "wavelan_cs"

card "Lucent Technologies WaveLAN/IEEE Adapter"
  version "Lucent Technologies", "WaveLAN/IEEE"
  bind "wvlan_cs"

card "Melco WLI-PCM-L11"
  manfid 0x0156, 0x0002
  bind "wvlan_cs"

card "NCR WaveLAN Adapter"
  version "NCR", "WaveLAN/PCMCIA"
  bind "wavelan_cs"

card "NCR WaveLAN/IEEE Adapter"
  version "NCR", "WaveLAN/IEEE"
  bind "wvlan_cs"

card "RayLink PC Card WLAN Adapter"
  manfid 0x01a6, 0x0000
  bind "ray_cs"

card "Xircom CreditCard Netwave"
  version "Xircom", "CreditCard Netwave"
  bind "netwave_cs"

#
# Modems and other serial devices
#
# NOTE: most modems do not need explicit entries here, because they
# are correctly identified using the following generic entry.
#
card "Serial or Modem"
  function serial_port
  bind "serial_cs"

card "Angia Fax/Modem"
  version "Intelligent", "ANGIA FAX/MODEM"
  bind "serial_cs"

card "Cirrus Logic 14.4K Fax Modem"
  version "CIRRUS LOGIC", "FAX MODEM"
  bind "serial_cs"

card "Compaq 28.8K Modem"
  version "COMPAQ", "PCMCIA 28800 FAX/DATA MODEM"
  bind "serial_cs"

card "Compaq 33.6K Modem"
  version "COMPAQ", "PCMCIA 33600 FAX/DATA MODEM"
  bind "serial_cs"

card "Dr. Neuhaus 14.4K FURY Card"
  version "Dr. Neuhaus", "FURY CARD 14K4"
  bind "serial_cs"

card "E.TECH Bullet 33.6K Modem"
  version "PCMCIA   ", "C336MX     "
  bind "serial_cs"

card "Gateway 2000 TelePath Fax Modem"
  version "GATEWAY2000", "CC3144", "*", "PCMCIA MODEM"
  bind "serial_cs"

card "Intel-compatible Modem"
  version "Intel", "MODEM 2400+"
  bind "serial_cs"

card "Macronix Fax/Modem"
  version "MACRONIX", "FAX/MODEM"
  bind "serial_cs"

card "Megahertz PCMCIA Modem"
  version "MEGAHERTZ", "*", "*", "PCMCIA MODEM"
  bind "serial_cs"

card "Megahertz V.34 Modem"
  version "MEGAHERTZ", "*", "V.34 PCMCIA MODEM"
  bind "serial_cs"

card "MultiTech MultiModem"
  version "Multi-Tech", "MT1432LT"
  bind "serial_cs"

card "MultiTech V.34 Modem"
  version "Multi-Tech", "MT2834LT"
  bind "serial_cs"

card "MultiTech MT5634ZLX"
  version "MultiTech", "PCMCIA 56K DataFax"
  cis "cis/MT5634ZLX.dat"
  bind "serial_cs"

card "Toshiba T144PF Modem"
  version "TOSHIBA", "T144PF", "*", "PCMCIA MODEM"
  bind "serial_cs"

card "Advantech COMpad-32/85"
  version "ADVANTECH", "COMpad-32/85", "1.0"
  cis "cis/COMpad.dat"
  bind "serial_cs"

card "Advantech COMpad-32/85"
  version "ADV", "*", "TECH", "COMpad-32/85"
  bind "serial_cs"

card "Argosy Dual Serial I/O"
  version "*", "RS-COM 2P"
  cis "cis/RS-COM-2P.dat"
  bind "serial_cs"

card "Computerboards PCM-COM422"
  version "Computerboards, Inc.", "PCM-COM422"
  bind "serial_cs"

card "Fujitsu FMV-JMD711"
  version "FUJITSU", "FC14F ", "MBH10213"
  bind "serial_cs"

card "IOTech Dual RS-232"
  version "IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card"
  bind "serial_cs"

card "National Instruments PCMCIA-232"
  manfid 0x10b, 0x0d50
  bind "serial_cs"

card "National Instruments PCMCIA-232/2"
  manfid 0x10b, 0x0d51
  bind "serial_cs"

card "National Instruments PCMCIA-485"
  manfid 0x10b, 0x0d52
  bind "serial_cs"

card "National Instruments PCMCIA-485/2"
  manfid 0x10b, 0x0d53
  bind "serial_cs"

card "National Instruments PCMCIA-232/4"
  manfid 0x10b, 0xd180
  bind "serial_cs"

card "Omega Engineering QSP-100"
  manfid 0x0137, 0x0025
  bind "serial_cs"

card "Quatech Dual RS-232"
  version "Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card"
  bind "serial_cs"

card "Quatech Quad RS-232"
  manfid 0x0137, 0x001b
  bind "serial_cs"

card "Silicom 2S100 Dual Serial"
  manfid 0x0089, 0x0301
  bind "serial_cs"

card "Socket Communications Dual RS-232"
  manfid 0x0104, 0x0006
  bind "serial_cs"

#
# Memory cards
#
card "Anonymous Memory"
  anonymous
  bind "memory_cs"

card "Memory Card"
  function memory_card
  bind "memory_cs"

card "IBM 2MB SRAM"
  version "IBM", "2MB SRAM"
  bind "memory_cs"

card "IBM 4MB Series 1 Flash"
  version "IBM", "4MB FLASH"
  bind "memory_cs", "ftl_cs"

card "IBM 8MB Series 2 Flash"
  version "IBM", "8MB FLASH"
  bind "memory_cs", "ftl_cs"

card "Intel Series 2 2MB Flash"
  version "intel", "SERIES2-02 "
  bind "memory_cs", "ftl_cs"

card "Intel Series 2 4MB Flash"
  version "intel", "SERIES2-04 "
  bind "memory_cs", "ftl_cs"

card "Intel Series 2 20MB Flash"
  version "intel", "SERIES2-20 "
  bind "memory_cs", "ftl_cs"

card "Intel Series 2+ 8MB Flash"
  version "Intel", "S2E8 SW"
  bind "memory_cs", "ftl_cs"

card "Intel Series 2+ 20MB Flash"
  version "Intel", "S2E20SW"
  bind "memory_cs", "ftl_cs"

card "Intel Series 100 Flash"
  version "intel", "VALUE SERIES 100 "
  bind "memory_cs", "ftl_cs"

card "IO DATA 2MB SRAM"
  version "IO DATA", "PCS-2M", "2MB SRAM"
  bind "memory_cs"

card "Maxtor MobileMax Flash"
  version "Maxtor", "MAXFL MobileMax Flash Memory Card"
  bind "memory_cs", "ftl_cs"

card "Seiko/Epson WWB101EN20"
  version "SEIKO EPSON", "WWB101EN20"
  bind "memory_cs"

card "Seiko/Epson WWB513EN20"
  version "SEIKO EPSON", "WWB513EN20"
  bind "memory_cs"

card "Franklink/Rolodex REX-3000"
  version "Starfish, Inc.", "REX-3000"
  bind "memory_cs"

card "Franklink/Rolodex REX-4100"
  version "Starfish, Inc.", "REX-4100"
  bind "memory_cs"

card "RATOC SmartMedia Adapter"
  version "RATOC Systems,Inc.", "SmartMedia ADAPTER PC Card"
  bind "memory_cs", "ftl_cs"

#
# Memory Technology Drivers
#
region "Generic or SRAM"
  default
  mtd "sram_mtd"

region "Intel Series 2 Flash"
  jedec 0x89 0xa2
  mtd "iflash2_mtd"

region "Intel Series 100 Flash"
  jedec 0x89 0xaa
  mtd "iflash2_mtd"

region "Intel Series 2+ Flash"
  jedec 0x89 0xa0
  mtd "iflash2+_mtd"

#
# Token Ring adapters
#
card "3Com TokenLink Velocity Adapter"
  version "3Com", "TokenLink Velocity PC Card"
  bind "ibmtr_cs"

card "IBM Token Ring Adapter"
  version "IBM", "TOKEN RING"
  bind "ibmtr_cs"

#
# SCSI host adapters
#
card "Adaptec APA-1460 SlimSCSI"
  version "Adaptec, Inc.", "APA-1460 SCSI Host Adapter"
  bind "aha152x_cs"

card "Eiger Labs SCSI"
  version "EIger Labs", "PCMCIA-to-SCSI Adapter"
  bind "qlogic_cs"

card "Epson SC200 SCSI"
  version "EPSON", "SCSI-2 PC Card SC200"
  bind "qlogic_cs"
  
card "IBM SCSI"
  version "IBM Corp.", "SCSI PCMCIA Card"
  bind "fdomain_cs"

card "IBM SCSI"
  version "SCSI PCMCIA Adapter Card"
  bind "fdomain_cs"

#card "MACNICA mPS100 SCSI"
#  version "MACNICA", "MIRACLE SCSI", "mPS100"
#  bind "qlogic_cs"

card "MACNICA mPS110 SCSI"
  version "MACNICA", "MIRACLE SCSI-II mPS110"
  bind "qlogic_cs"

card "Midori CN-SC43 SCSI"
  version "MIDORI ELECTRONICS ", "CN-SC43"
  bind "qlogic_cs"

card "NEC PC-9801N-J03R SCSI"
  version "NEC", "PC-9801N-J03R"
  bind "qlogic_cs"

card "New Media Bus Toaster SCSI"
  version "New Media", "SCSI", "Bus Toaster"
  bind "aha152x_cs"

card "New Media Toast & Jam Sound/SCSI"
  version "New Media Corporation", "Multimedia Sound/SCSI"
  bind "aha152x_cs"

card "Noteworthy Bus Toaster SCSI"
  version "NOTEWORTHY", "SCSI", "Bus Toaster"
  bind "aha152x_cs"

card "New Media BASICS SCSI"
  version "BASICS by New Media Corporation", "SCSI Sym53C500"
  bind "sym53c500_cs"

card "New Media Bus Toaster SCSI"
  version "New Media Corporation", "SCSI Bus Toaster Sym53C500"
  bind "sym53c500_cs"

card "Panasonic KXLC003"
  version "KME ", "KXLC003"
  bind "qlogic_cs"

card "Panasonic KXLC004"
  version "KME ", "KXLC004"
  bind "qlogic_cs"

card "Qlogic FastSCSI"
  version "QLOGIC CORPORATION", "pc05"
  bind "qlogic_cs"

card "Qlogic FastSCSI"
  version "QLOGIC CORPORATION", "pc05 rev 1.10"
  bind "qlogic_cs"

card "Raven CD-Note SCSI"
  version "KME", "KXLC002", "00"
  bind "qlogic_cs"

card "RATOC REX-9530 SCSI-2"
  version "RATOC System Inc.", "SCSI2 CARD 37"
  bind "qlogic_cs"

card "SIMA TECH SCSI9000"
  version "*", "SCSI9000"
  bind "sym53c500_cs"

card "Simple Technology SCSI"
  version " SIMPLE TECHNOLOGY Corporation",
    "SCSI PCMCIA Credit Card Controller"
  bind "fdomain_cs"

card "Toshiba SCSC200A SCSI"
  version "TOSHIBA", "SCSC200A PC CARD SCSI"
  bind "qlogic_cs"

card "Toshiba SCSC200B SCSI"
  version "TOSHIBA", "SCSC200B PC CARD SCSI-10"
  bind "qlogic_cs"

#
# Multifunction cards
#
card "3Com 3c562/3c563 Ethernet/Modem"
  manfid 0x0101, 0x0562
  bind "3c589_cs" to 0, "serial_cs" to 1

card "3Com/Megahertz 3CXEM556 Ethernet/Modem"
  manfid 0x0101, 0x0035
  cis "cis/3CXEM556.dat"
  bind "3c589_cs" to 0, "serial_cs" to 1

card "3Com/Megahertz 3CXEM556 B-INT Ethernet/Modem"
  manfid 0x0101, 0x003d
  cis "cis/3CXEM556.dat"
  bind "3c589_cs" to 0, "serial_cs" to 1

card "3Com/Megahertz 3CCFEM556 Ethernet/Modem"
  manfid 0x0101, 0x0556
  cis "cis/3CCFEM556.dat"
  bind "3c574_cs" to 0, "serial_cs" to 1

card "Accton EN2218 LAN/Modem"
  version "PCMCIA", "EN2218-LAN/MODEM"
  cis "cis/PCMLM28.dat"
  bind "pcnet_cs", "serial_cs"

card "Accton UE2218 LAN/Modem"
  version "PCMCIA", "UE2218-LAN/MODEM"
  cis "cis/PCMLM28.dat"
  bind "pcnet_cs", "serial_cs"

card "AnyCom Fast Ethernet/Modem"
  version "AnyCom", "Fast Ethernet + 56K COMBO"
  bind "pcnet_cs", "serial_cs"

card "Apex MultiCard Ethernet/Modem"
  version "APEX DATA", "MULTICARD", "ETHERNET-MODEM"
  bind "pcnet_cs" to 0, "serial_cs" to 1

card "Billionton LM5LT-10B Ethernet/Modem"
  manfid 0x021b, 0x0101
  bind "pcnet_cs", "serial_cs"

card "Compaq Microcom CPQ550 Ethernet/Modem"
  manfid 0x0138, 0x110a
  bind "xirc2ps_cs", "serial_cs"

card "Dayna Communicard Ethernet/Modem"
  version "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION"
  cis "cis/DP83903.dat"
  bind "pcnet_cs" to 0, "serial_cs" to 1

card "D-Link DME336T Ethernet/Modem"
  version "D-Link", "DME336T"
  bind "pcnet_cs", "serial_cs"

card "D-Link DMF560TX Ethernet/Modem"
  manfid 0x0143, 0xc0ab
  bind "pcnet_cs", "serial_cs"

card "Gateway Telepath Ethernet/Modem"
  version "Gateway 2000", "XJEM3336"
  bind "smc91c92_cs", "serial_cs"

card "Grey Cell GCS3400 Ethernet/Modem"
  version "Grey Cell", "GCS3000"
  bind "pcnet_cs", "serial_cs"

card "IBM Home and Away Ethernet/Modem"
  version "IBM", "Home and Away Credit Card Adapter"
  bind "pcnet_cs" to 0, "serial_cs" to 1

card "IBM Home and Away 28.8 Ethernet/Modem"
  version "IBM", "Home and Away 28.8 PC Card       "
  bind "pcnet_cs" to 0, "serial_cs" to 1

card "IBM w95 Home and Away Ethernet/Modem"
  version "IBM", "w95 Home and Away Credit Card "
  bind "pcnet_cs" to 0, "serial_cs" to 1

card "Intel EtherExpress PRO/100 LAN/Modem"
  manfid 0x0089, 0x110a
  bind "xirc2ps_cs", "serial_cs"

card "No-Name Ethernet/Modem"
  version "*", "FAX/Modem/Ethernet Combo Card "
  bind "pcnet_cs" to 0, "serial_cs" to 1

card "Linksys LANmodem 28.8"
  version "LINKSYS", "PCMLM28"
  cis "cis/PCMLM28.dat"
  bind "pcnet_cs", "serial_cs"

card "Linksys LANmodem 33.6"
  version "LINKSYS", "PCMLM336"
  bind "pcnet_cs", "serial_cs"

card "Linksys EtherFast LANmodem 56K"
  version "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)"
  bind "pcnet_cs", "serial_cs"

card "Megahertz CC/XJEM1144 Ethernet/Modem"
  version "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM"
  bind "smc91c92_cs", "serial_cs"

card "Megahertz CC/XJEM1144 Ethernet/Modem"
  version "MEGAHERTZ", "XJEM1144/CCEM1144"
  bind "smc91c92_cs", "serial_cs"

card "Megahertz EM1144T Ethernet/Modem"
  version "MEGAHERTZ", "EM1144T", "PCMCIA MODEM"
  bind "smc91c92_cs", "serial_cs"

card "Megahertz CC/XJEM3288 Ethernet/Modem"
  version "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM"
  bind "smc91c92_cs", "serial_cs"

card "Megahertz CC/XJEM3336 Ethernet/Modem"
  version "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM"
  bind "smc91c92_cs", "serial_cs"

card "Motorola Marquis Ethernet/Modem"
  version "Motorola MARQUIS"
  bind "3c589_cs" to 0, "serial_cs" to 1

card "Motorola Mariner Ethernet/Modem"
  manfid 0x0109, 0x0501
  bind "smc91c92_cs", "serial_cs"

card "NSC DP83903-based Ethernet/Modem"
  version "*", "*", "*", "NSC MF LAN/Modem"
  cis "cis/DP83903.dat"
  bind "pcnet_cs" to 0, "serial_cs" to 1

card "Ositech Jack of Diamonds Ethernet/Modem"
  version "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet"
  bind "smc91c92_cs", "serial_cs"

card "Ositech Jack of Hearts Ethernet/Modem"
  version "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet"
  bind "smc91c92_cs", "serial_cs"

card "Ositech Jack of Hearts Ethernet/Modem"
  manfid 0x0140, 0x000a
  bind "smc91c92_cs", "serial_cs"

card "Psion Gold Card V34 Ethernet"
  version "Psion Dacom", "Gold Card V34 Ethernet"
  cis "cis/PCMLM28.dat"
  bind "pcnet_cs", "serial_cs"

card "Psion Gold Card V34 Ethernet"
  version "Psion Dacom", "Gold Card V34 Ethernet GSM"
  cis "cis/PCMLM28.dat"
  bind "pcnet_cs", "serial_cs"

card "Psion Gold Card Netglobal 56K+10Mb Ethernet"
  manfid 0x016c, 0x0020
  bind "smc91c92_cs" to 0, "serial_cs" to 1

card "Rover ComboCard Ethernet/Modem"
  version "PCMCIAs", "ComboCard"
  bind "pcnet_cs", "serial_cs"

card "TDK Global Networker Ethernet/Modem"
  version "TDK", "GlobalNetworker 3410/3412"
  bind "serial_cs"

card "TDK 3000/3400/5670 Fast Ethernet/Modem"
  manfid 0x0143, 0x3341
  bind "pcnet_cs", "serial_cs"

card "TDK DFL5610WS Ethernet/Modem"
  manfid 0x0105, 0xea15
  bind "pcnet_cs", "serial_cs"

card "Telecom Device SuperSocket LM336 Ethernet/Modem"
  version "PCMCIAs", "LanModem"
  bind "pcnet_cs", "serial_cs"

card "Xircom CE II Ethernet/Modem"
  version "Xircom", "CreditCard Ethernet+Modem II"
  bind "serial_cs"

card "Xircom CEM28 Ethernet/Modem"
  version "Xircom", "*", "CEM28"
  bind "xirc2ps_cs", "serial_cs"

card "Xircom CEM33 Ethernet/Modem"
  version "Xircom", "*", "CEM33"
  bind "xirc2ps_cs", "serial_cs"

card "Xircom CEM56 Ethernet/Modem"
  version "Xircom", "*", "CEM56"
  bind "xirc2ps_cs", "serial_cs"

card "Xircom RealPort REM10BT Ethernet/Modem"
  version "Xircom", "*", "REM10"
  bind "xirc2ps_cs", "serial_cs"

#
# ATA/IDE fixed disk devices
#
card "ATA/IDE Fixed Disk"
  function fixed_disk
  bind "ide_cs"

card "ACE DoubleFlash 20MB"
  version "IBM", "IBM17JSSFP20"
  bind "ide_cs"

card "Argosy EIDE CD-ROM"
  version "ARGOSY", "CD-ROM"
  bind "ide_cs"

card "Caravelle CD-36N/CD-36E CD-ROM"
  version "Caravelle", "PSC-IDE ", "PSC000"
  bind "ide_cs"

card "CNF CARDport CD-ROM"
  version "CNF CD-M", "CD-ROM"
  bind "ide_cs"

card "Creative Technology CD-ROM"
  version "Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card"
  bind "ide_cs"

card "Digital Mobile Media CD-ROM"
  version "Digital Equipment Corporation.", "Digital Mobile Media CD-ROM"
  bind "ide_cs"

card "EXP CD940 CD-ROM"
  version "EXP   ", "CD-ROM"
  bind "ide_cs"

card "EXP Traveler 620 CD-ROM"
  version "EXP", "CD+GAME", "C1"
  bind "ide_cs"

card "Freecom IQ-drive"
  version "FREECOM", "PCCARD-IDE"
  bind "ide_cs"

card "Generic ATAPI CD-ROM"
  version "PCMCIA", "CD-ROM"
  bind "ide_cs"

card "IBM Max Portable CD-ROM"
  manfid 0x00a4, 0x002d
  bind "ide_cs"

card "IO DATA CDP-TX/PCIDE"
  version "IO DATA", "PCIDE"
  bind "ide_cs"

card "IO DATA PCIDE II"
  version "IO DATA", "PCIDEII"
  bind "ide_cs"

card "IO DATA CBIDE"
  version "WIT", "IDE16"
  bind "ide_cs"

card "MCD601p CD-ROM"
  version "CDROM", "IDE", "MCD-601p"
  bind "ide_cs"

card "Ninja ATA"
  version " ", "NinjaATA-"
  bind "ide_cs"

card "Simple Tech Compact Flash"
  version "STI Flash"
  bind "ide_cs"

#
# Non-ATA/IDE CD-ROM's
#
card "Innovative Communications CyberRom CD"
  version "Innovative Communications", "CyberRom CD"
  bind "oti12_cs"

#
# Miscellaneous card definitions
#
#card "Canon FDCard"
#  version "Canon Electronics INC.", "FDCard Ver. 1.00"
#
#card "New Media .WAVjammer"
#version "New Media Corporation", ".WAVjammer"

card "IBM Smart Capture Card"
  version "IBM Corp.", "Video Capture"
  bind "iscc_cs"

card "Parallel Port Card"
  function parallel_port
  bind "parport_cs"

card "Quatech SPP-100 Parallel Port Card"
  manfid 0x0137, 0x0003
  bind "parport_cs"

card "TELES S0/PC ISDN"
  version "TELES", "S0/PC"
  bind "teles_cs"

#
# CardBus cards
#
card "3Com 3c575-TX Fast EtherLink XL"
  manfid 0x0101, 0x5057
  bind "3c575_cb"

card "3Com 3CCFE575B/3CXFE575B Fast EtherLink XL"
  manfid 0x0101, 0x5157
  bind "3c575_cb"

card "3Com 3CCFE575CT/3CXFE575CT Fast EtherLink XL"
  manfid 0x0101, 0x5257
  bind "3c575_cb"

card "3Com 3CCFEM656B w/Winmodem"
  manfid 0x0102, 0x6560
  bind "3c575_cb"

card "3Com 3CCFEM656B w/Winmodem"
  manfid 0x0102, 0x6562
  bind "3c575_cb"

card "Accton EN2220 Fast Ethernet"
  version "Accton", "EN2220 CardBus Fast Ethernet Card"
  bind "tulip_cb"

card "Adaptec APA-1480 SCSI Host Adapter"
  manfid 0x012f, 0xcb01
  bind "apa1480_cb"

#Conflicts with corega PCC-T!
#card "Allied Telesyn AT-2800 10/100 Fast Ethernet"
#  manfid 0xc00f, 0x0000
#  bind "tulip_cb"

card "Ambicom AMB8100 Fast Ethernet"
  manfid 0x9513, 0x0081
  bind "tulip_cb"

card "Asante FriendlyNET 10/100 CardBus"
  version "Asante", "FriendlyNET 10/100 CardBus"
  bind "tulip_cb"

card "Tulip-based CardBus Fast Ethernet"
  version "CardBus", "10/100Mbps LAN Card"
  bind "tulip_cb"

card "D-Link DFE-660 Fast Ethernet"
  manfid 0x50c7, 0xcafe
  bind "tulip_cb"

card "Genius MF3000 Fast Ethernet"
  version "CardBus", "10/100Mbps LanCard"
  bind "tulip_cb"

card "IBM 10/100 EtherJet CardBus"
  manfid 0x00a4, 0x0113
  bind "tulip_cb"

card "Intel EtherExpress PRO/100 CardBus Mobile Adapter32"
  manfid 0x0089, 0x0102
  bind "tulip_cb"

card "Kingston KNE-CB4TX Fast Ethernet"
  manfid 0x0186, 0x0101
  bind "tulip_cb"

card "Linksys EtherFast 10/100"
  manfid 0x0149, 0x0231
  bind "tulip_cb"

card "Linksys EtherFast 10/100"
  manfid 0x0149, 0xc2ab
  bind "tulip_cb"

card "SMC EZ 10/100 Fast Ethernet"
  manfid 0x01bf, 0x2220
  bind "tulip_cb"

card "SMC EZ 10/100 Fast Ethernet"
  manfid 0x01bf, 0x2225
  bind "tulip_cb"

#card "SVEC 10/100 Fast Ethernet"
#  manfid 0x8a01, 0x0100
#  bind "tulip_cb"

card "TDK NetworkFlyer 10/100 Fast Ethernet"
  manfid 0x0105, 0x0500
  bind "tulip_cb"

card "UMAX Technologies UMAX250 Fast Ethernet"
  manfid 0x9513, 0x0081
  bind "tulip_cb"

card "Ositech Seven of Spades Fast Ethernet"
  manfid 0x0140, 0x0011
  bind "epic_cb"

card "Ositech Jack of Spades Fast Ethernet/Modem"
  manfid 0x0140, 0x000f
  bind "epic_cb" to 0, "serial_cb" to 1

card "Ositech Jack of Spades Fast Ethernet/Modem"
  manfid 0x0140, 0x0012
  bind "epic_cb" to 0, "serial_cb" to 1

card "Psion Gold Card Netglobal 56K+10/100Mb CardBus"
  manfid 0x016c, 0x0021
  bind "epic_cb" to 0, "serial_cb" to 1

card "Xircom CardBus 10/100 Ethernet"
  version "Xircom", "*", "CBEII-10/100"
  bind "tulip_cb"

card "Xircom CardBus 10/100 Ethernet + 56K Modem"
  version "Xircom", "*", "CBEM56G"
  bind "tulip_cb" to 0, "serial_cb" to 1

# Include configuration files for add-on drivers

source ./*.conf

# Include local configuration settings

source ./config.opts



[ File listing: /etc/pcmcia/config.opts ]
#
# Local PCMCIA Configuration File
#
# System resources available for PCMCIA devices
#
include port 0x100-0x4ff, port 0x1000-0x17ff
include memory 0xc0000-0xfffff, memory 0xa0000000-0xa0ffffff
#
# Extra port range for IBM Token Ring
#
include port 0xa00-0xaff
#
# Resources we should not use, even if they appear to be available
#
# First built-in serial port
exclude irq 4
# Second built-in serial port
#exclude irq 3
# First built-in parallel port
exclude irq 7
#
# Options for loadable modules
#
# To fix sluggish network with IBM ethernet adapter...
#module "pcnet_cs" opts "mem_speed=600"
#
# Options for Xircom Netwave driver...
#module "netwave_cs" opts "domain=0x100 scramble_key=0x0"


[ File listing: /var/log/messages ]
// MY NOTE: HERE IS SOME SHUT DOWN STUFF

Feb 25 09:23:16 rdlab16 gnome-name-server[813]: name server was running 
on display, exiting
Feb 25 09:45:13 rdlab16 gnome-name-server[807]: input condition is: 16, exiting
Feb 25 09:45:15 rdlab16 innd: control:14 closed
Feb 25 09:45:15 rdlab16 innd: localconn:16 closed
Feb 25 09:45:15 rdlab16 innd: remconn:5 closed
Feb 25 09:45:15 rdlab16 innd: SERVER perl filtering disabled
Feb 25 09:45:16 rdlab16 innd: SERVER shutdown received signal 15
Feb 25 09:45:16 rdlab16 innd: innd shutdown succeeded
Feb 25 09:45:16 rdlab16 innd: actived -9 succeeded
Feb 25 09:45:16 rdlab16 xfs: xfs shutdown succeeded
Feb 25 09:45:17 rdlab16 gpm: Shutting down gpm mouse services: 
Feb 25 09:45:17 rdlab16 gpm: gpm
Feb 25 09:45:17 rdlab16 gpm: 
Feb 25 09:45:17 rdlab16 rc: Stopping gpm succeeded
Feb 25 09:45:17 rdlab16 httpd: httpd shutdown succeeded
Feb 25 09:45:17 rdlab16 sound: Saving sound configuration: 
Feb 25 09:45:17 rdlab16 sound: sound
Feb 25 09:45:17 rdlab16 sound: 
Feb 25 09:45:17 rdlab16 rc: Stopping sound succeeded
Feb 25 09:45:17 rdlab16 nfs: Shutting down NFS services:  succeeded
Feb 25 09:45:17 rdlab16 mountd[495]: Caught signal 15, un-registering and exiting. 
Feb 25 09:45:17 rdlab16 nfs: rpc.mountd shutdown succeeded
Feb 25 09:45:22 rdlab16 kernel: nfsd: terminating on signal 9 
Feb 25 09:45:22 rdlab16 last message repeated 7 times
Feb 25 09:45:22 rdlab16 kernel: nfsd: last server exiting 
Feb 25 09:45:22 rdlab16 nfs: nfsd shutdown succeeded
Feb 25 09:45:22 rdlab16 nfs: rpc.rquotad shutdown succeeded
Feb 25 09:45:22 rdlab16 rpc.statd[473]: Caught signal 15, un-registering and exiting.
Feb 25 09:45:22 rdlab16 nfs: rpc.statd shutdown succeeded
Feb 25 09:45:23 rdlab16 sendmail: sendmail shutdown succeeded
Feb 25 09:45:23 rdlab16 named[442]: named shutting down
Feb 25 09:45:23 rdlab16 named[442]: USAGE 951500723 951499264 CPU=0.01u/0s
CHILDCPU=0u/0s
Feb 25 09:45:23 rdlab16 named[442]: NSTATS 951500723 951499264
Feb 25 09:45:23 rdlab16 named[442]: XSTATS 951500723 951499264 RR=0 RNXD=0 RFwdR=0 RDupR=0 RFail=0 RFErr=0 RErr=0 RAXFR=0 RLame=0 ROpts=0 SSysQ=1 SAns=0 SFwdQ=0 SDupQ=286 SErr=0 RQ=0 RIQ=0 RFwdQ=0 RDupQ=0 RTCP=0 SFwdR=0 SFail=0 SFErr=0 SNaAns=0 SNXD=0
Feb 25 09:45:23 rdlab16 named: named shutdown succeeded
Feb 25 09:45:24 rdlab16 inet: inetd shutdown succeeded
Feb 25 09:45:24 rdlab16 atd: atd shutdown succeeded
Feb 25 09:45:24 rdlab16 crond: crond shutdown succeeded
Feb 25 09:45:25 rdlab16 lpd: lpd shutdown succeeded
Feb 25 09:45:25 rdlab16 dd: 1+0 records in
Feb 25 09:45:25 rdlab16 dd: 1+0 records out
Feb 25 09:45:25 rdlab16 random: Saving random seed succeeded
Feb 25 09:45:25 rdlab16 portmap: portmap shutdown succeeded
Feb 25 09:45:25 rdlab16 network: Shutting down interface eth0 succeeded
Feb 25 09:45:25 rdlab16 network: Shutting down interface eth1 succeeded
Feb 25 09:45:26 rdlab16 network: Disabling IPv4 packet forwarding succeeded
Feb 25 09:45:26 rdlab16 apmd[102]: Exiting
Feb 25 09:45:26 rdlab16 apmd: apmd shutdown succeeded
Feb 25 09:45:26 rdlab16 pcmcia: Shutting down PCMCIA services:
Feb 25 09:45:26 rdlab16 pcmcia: .
Feb 25 09:45:26 rdlab16 rc: Stopping pcmcia succeeded
Feb 25 09:45:26 rdlab16 kernel: Kernel logging (proc) stopped.
Feb 25 09:45:26 rdlab16 kernel: Kernel log daemon terminating.
Feb 25 09:45:27 rdlab16 syslog: klogd shutdown succeeded
Feb 25 09:45:27 rdlab16 exiting on signal 15


// MY NOTE:  HERE IS THE RESTART

Feb 25 09:46:19 rdlab16 syslogd 1.3-3: restart.
Feb 25 09:46:19 rdlab16 syslog: syslogd startup succeeded
Feb 25 09:46:19 rdlab16 syslog: klogd startup succeeded
Feb 25 09:46:19 rdlab16 kernel: klogd 1.3-3, log source = /proc/kmsg started.
Feb 25 09:46:19 rdlab16 kernel: Inspecting /boot/System.map-2.2.5-15
Feb 25 09:46:19 rdlab16 kernel: Loaded 6721 symbols from /boot/System.map-2.2.5-15.
Feb 25 09:46:19 rdlab16 kernel: Symbols match kernel version 2.2.5.
Feb 25 09:46:19 rdlab16 kernel: Loaded 7 symbols from 2 modules.
Feb 25 09:46:19 rdlab16 kernel: Linux version 2.2.5-15 
 (root@porky.devel.redhat.com) 
 (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) 
 #1 Mon Apr 19 22:21:09 EDT 1999 
Feb 25 09:46:19 rdlab16 kernel: Detected 451031025 Hz processor. 
Feb 25 09:46:19 rdlab16 kernel: Console: colour VGA+ 80x25 
Feb 25 09:46:19 rdlab16 kernel: Calibrating delay loop... 897.84 BogoMIPS 
Feb 25 09:46:19 rdlab16 kernel: Memory: 63140k/65536k available 
 (996k kernel code, 412k reserved, 928k data, 60k init) 
Feb 25 09:46:19 rdlab16 kernel: VFS: Diskquotas version dquot_6.4.0 initialized 
Feb 25 09:46:19 rdlab16 kernel: CPU: AMD AMD-K6(tm) 3D processor stepping 0c 
Feb 25 09:46:19 rdlab16 kernel: Checking 386/387 coupling... OK, 
 FPU using exception 16 error reporting. 
Feb 25 09:46:19 rdlab16 kernel: Checking 'hlt' instruction... OK. 
Feb 25 09:46:19 rdlab16 kernel: POSIX conformance testing by UNIFIX 
Feb 25 09:46:19 rdlab16 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb290 
Feb 25 09:46:19 rdlab16 kernel: PCI: Using configuration type 1 
Feb 25 09:46:19 rdlab16 kernel: PCI: Probing PCI hardware 
Feb 25 09:46:19 rdlab16 kernel: PCI: 00:38 [1106/0586]: Work around 
 ISA DMA hangs (00) 
Feb 25 09:46:19 rdlab16 kernel: Activating ISA DMA hang workarounds. 
Feb 25 09:46:19 rdlab16 kernel: Linux NET4.0 for Linux 2.2 
Feb 25 09:46:19 rdlab16 kernel: Based upon Swansea 
 University Computer Society NET3.039 
Feb 25 09:46:19 rdlab16 kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0. 
Feb 25 09:46:19 rdlab16 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 
Feb 25 09:46:19 rdlab16 kernel: IP Protocols: ICMP, UDP, TCP, IGMP 
Feb 25 09:46:19 rdlab16 kernel: Initializing RT netlink socket 
Feb 25 09:46:19 rdlab16 kernel: Starting kswapd v 1.5  
Feb 25 09:46:19 rdlab16 kernel: Detected PS/2 Mouse Port. 
Feb 25 09:46:19 rdlab16 kernel: Serial driver version 4.27 with 
 MANY_PORTS MULTIPORT SHARE_IRQ enabled 
Feb 25 09:46:19 rdlab16 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A 
Feb 25 09:46:19 rdlab16 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A 
Feb 25 09:46:19 rdlab16 kernel: pty: 256 Unix98 ptys configured 
Feb 25 09:46:19 rdlab16 kernel: apm: BIOS version 1.2 Flags 0x07 
 (Driver version 1.9) 
Feb 25 09:46:19 rdlab16 kernel: Real Time Clock Driver v1.09 
Feb 25 09:46:19 rdlab16 kernel: RAM disk driver initialized:  16 RAM 
 disks of 4096K size 
Feb 25 09:46:19 rdlab16 kernel: VP_IDE: IDE controller on PCI bus 00 dev 39 
Feb 25 09:46:19 rdlab16 kernel: VP_IDE: not 100% native mode: will probe irqs later 
Feb 25 09:46:19 rdlab16 kernel:     ide0: BM-DMA at 0xe000-0xe007, 
 BIOS settings: hda:DMA, hdb:DMA 
Feb 25 09:46:19 rdlab16 kernel:     ide1: BM-DMA at 0xe008-0xe00f, 
 BIOS settings: hdc:DMA, hdd:DMA 
Feb 25 09:46:19 rdlab16 kernel: hda: QUANTUM FIREBALL EX3.2A, ATA DISK drive 
Feb 25 09:46:19 rdlab16 kernel: hdc: CD-ROM 40X/AKU, ATAPI CDROM drive 
Feb 25 09:46:19 rdlab16 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 
Feb 25 09:46:19 rdlab16 kernel: ide1 at 0x170-0x177,0x376 on irq 15 
Feb 25 09:46:19 rdlab16 kernel: hda: QUANTUM FIREBALL EX3.2A, 
 3079MB w/418kB Cache, CHS=782/128/63 
Feb 25 09:46:19 rdlab16 kernel: hdc: ATAPI 40X CD-ROM drive, 128kB Cache 
Feb 25 09:46:19 rdlab16 kernel: Uniform CDROM driver Revision: 2.54 
Feb 25 09:46:19 rdlab16 kernel: Floppy drive(s): fd0 is 1.44M 
Feb 25 09:46:19 rdlab16 kernel: FDC 0 is a post-1991 82077 
Feb 25 09:46:19 rdlab16 kernel: md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 
Feb 25 09:46:19 rdlab16 kernel: raid5: measuring checksumming speed 
Feb 25 09:46:19 rdlab16 kernel: raid5: using high-speed MMX checksum routine 
Feb 25 09:46:19 rdlab16 kernel:    pII_mmx   :   939.165 MB/sec 
Feb 25 09:46:19 rdlab16 kernel:    p5_mmx    :   843.915 MB/sec 
Feb 25 09:46:19 rdlab16 kernel:    8regs     :   646.557 MB/sec 
Feb 25 09:46:19 rdlab16 kernel:    32regs    :   467.487 MB/sec 
Feb 25 09:46:19 rdlab16 kernel: using fastest function: pII_mmx (939.165 MB/sec) 
Feb 25 09:46:19 rdlab16 kernel: scsi : 0 hosts. 
Feb 25 09:46:19 rdlab16 kernel: scsi : detected total. 
Feb 25 09:46:19 rdlab16 kernel: md.c: sizeof(mdp_super_t) = 4096 
Feb 25 09:46:19 rdlab16 kernel: Partition check: 
Feb 25 09:46:19 rdlab16 kernel:  hda: hda1 hda2 < hda5 hda6 > 
Feb 25 09:46:19 rdlab16 kernel: autodetecting RAID arrays 
Feb 25 09:46:19 rdlab16 kernel: autorun ... 
Feb 25 09:46:19 rdlab16 kernel: ... autorun DONE. 
Feb 25 09:46:19 rdlab16 kernel: VFS: Mounted root (ext2 filesystem) readonly. 
Feb 25 09:46:19 rdlab16 kernel: Freeing unused kernel memory: 60k freed 
Feb 25 09:46:19 rdlab16 kernel: Adding Swap: 100764k swap-space (priority -1)
 
Feb 25 09:46:19 rdlab16 kernel: PCnet-Home: PCI bios is 
 present, checking for devices... 
Feb 25 09:46:19 rdlab16 kernel: PCnet-Home: Found PCnet/PCI at 0xe800, irq 5. 
Feb 25 09:46:19 rdlab16 kernel: PCnet-Home: pcnet32 media value 0x8081. 
Feb 25 09:46:19 rdlab16 kernel: PCnet-Home: pcnet32 media reset to 0x8081. 
Feb 25 09:46:19 rdlab16 kernel: eth0: PCnet/Home 79C978 at 0xe800, 
 00 90 00 03 bb 10 assigned IRQ 5. 
Feb 25 09:46:19 rdlab16 kernel: PCnet-Home: Total of 1 AMD PCnetHome 
 Family Card(s) found. 

Feb 25 09:46:19 rdlab16 kernel: pcnet32.c: PCI bios is present, 
 checking for devices... 
Feb 25 09:46:19 rdlab16 kernel: PCI Master Bit has not been set. Setting... 
Feb 25 09:46:19 rdlab16 kernel: Found PCnet/PCI at 0xec00, irq 10. 
Feb 25 09:46:19 rdlab16 kernel: eth1: PCnet/FAST+ 79C972 at 0xec00, 
 00 00 1a 18 42 c3 assigned IRQ 10. 
Feb 25 09:46:19 rdlab16 kernel: pcnet32.c:v1.11 17.1.99 
 tsbogend@alpha.franken.de 

Feb 25 09:46:20 rdlab16 atd: atd startup succeeded
Feb 25 09:46:20 rdlab16 crond: crond startup succeeded
Feb 25 09:46:08 rdlab16 rc.sysinit: Loading default keymap succeeded 
Feb 25 09:46:08 rdlab16 rc.sysinit: Setting default font succeeded 
Feb 25 09:46:08 rdlab16 swapon: swapon: warning: /dev/hda5 has 
 insecure permissions 0660, 0600 suggested 
Feb 25 09:46:08 rdlab16 rc.sysinit: Activating swap partitions succeeded 
Feb 25 09:46:08 rdlab16 rc.sysinit: Setting hostname rdlab16.amd.com succeeded 
Feb 25 09:46:08 rdlab16 fsck: /dev/hda6: clean, 56497/759808 files, 
 802119/3032032 blocks 
Feb 25 09:46:08 rdlab16 rc.sysinit: Checking root filesystem succeeded 
Feb 25 09:46:08 rdlab16 rc.sysinit: Remounting root filesystem in 
 read-write mode succeeded 
Feb 25 09:46:12 rdlab16 rc.sysinit: Finding module dependencies succeeded 
Feb 25 09:46:13 rdlab16 fsck: /dev/hda1: clean, 23/5040 files, 2920/20128 blocks 
Feb 25 09:46:13 rdlab16 rc.sysinit: Checking filesystems succeeded 
Feb 25 09:46:13 rdlab16 rc.sysinit: Mounting local filesystems succeeded 
Feb 25 09:46:13 rdlab16 rc.sysinit: Turning on user and group 
 quotas for local filesystems succeeded 
Feb 25 09:46:15 rdlab16 date: Fri Feb 25 09:46:15 PST 2000 
Feb 25 09:46:15 rdlab16 rc.sysinit: Setting clock  (utc): Fri 
 Feb 25 09:46:15 PST 2000 succeeded 
Feb 25 09:46:15 rdlab16 rc.sysinit: Enabling swap space succeeded 
Feb 25 09:46:15 rdlab16 init: Entering runlevel: 3 
Feb 25 09:46:15 rdlab16 apmd[102]: Version 3.0beta4 
 (APM BIOS 1.2, Linux driver 1.9) 
Feb 25 09:46:16 rdlab16 apmd: apmd startup succeeded 
Feb 25 09:46:16 rdlab16 network: Enabling IPv4 packet forwarding succeeded 
Feb 25 09:46:18 rdlab16 network: Bringing up interface lo succeeded 
Feb 25 09:46:18 rdlab16 ifup: SIOCADDRT: Network is unreachable 
Feb 25 09:46:18 rdlab16 network: Bringing up interface eth0 succeeded 
Feb 25 09:46:19 rdlab16 network: Bringing up interface eth1 succeeded 
Feb 25 09:46:19 rdlab16 portmap: portmap startup succeeded 
Feb 25 09:46:19 rdlab16 netfs: Mounting other filesystems succeeded 
Feb 25 09:46:19 rdlab16 random: Initializing random number generator succeeded 


Feb 25 09:46:21 rdlab16 kernel: Linux PCMCIA Card Services 3.1.11 
Feb 25 09:46:21 rdlab16 kernel:   kernel build: 2.2.5-15 #1 Mon 
 Apr 19 22:21:09 EDT 1999 
Feb 25 09:46:21 rdlab16 kernel:   options:  [pci] [cardbus] [apm] 
Feb 25 09:46:21 rdlab16 kernel: PCI routing table version 1.0 at 0xfdc40 
Feb 25 09:46:21 rdlab16 kernel:   unknown PCI interrupt router 1106:0586 
Feb 25 09:46:21 rdlab16 kernel: Intel PCIC probe: not found. 
Feb 25 09:46:21 rdlab16 kernel: ds: no socket drivers loaded! 
Feb 25 09:46:20 rdlab16 pcmcia: Starting PCMCIA services:
Feb 25 09:46:21 rdlab16 pcmcia:  modules
Feb 25 09:46:21 rdlab16 pcmcia: /lib/modules/2.2.5-15/pcmcia/i82365.o: 
Feb 25 09:46:21 rdlab16 pcmcia: init_module: Device or resource busy
Feb 25 09:46:21 rdlab16 pcmcia: 
Feb 25 09:46:21 rdlab16 pcmcia: /lib/modules/2.2.5-15/pcmcia/ds.o: 
Feb 25 09:46:21 rdlab16 pcmcia:  cardmgr.
Feb 25 09:46:21 rdlab16 pcmcia: init_module: Device or resource busy
Feb 25 09:46:21 rdlab16 rc: Starting pcmcia succeeded
Feb 25 09:46:21 rdlab16 cardmgr[414]: starting, version is 3.1.11
Feb 25 09:46:21 rdlab16 cardmgr[414]: no pcmcia driver in /proc/devices
Feb 25 09:46:21 rdlab16 cardmgr[414]: exiting


Feb 25 09:46:21 rdlab16 inet: inetd startup succeeded
Feb 25 09:46:22 rdlab16 named[441]: starting.  named 8.2 Wed 
 Mar 31 10:57:12 EST 1999 ^Iroot@porky.devel.redhat.com:
 /usr/src/bs/BUILD/bind-8.2/src/bin/named
Feb 25 09:46:22 rdlab16 named[441]: cache zone "" 
 (IN) loaded (serial 0)
Feb 25 09:46:22 rdlab16 named[441]: Zone "0.0.127.in-addr.arpa" 
 (file named.local): No default TTL set using SOA minimum instead
Feb 25 09:46:22 rdlab16 named[441]: master zone "0.0.127.in-addr.arpa" 
 (IN) loaded (serial 1997022700)
Feb 25 09:46:22 rdlab16 named[441]: listening on [127.0.0.1].53 (lo)
Feb 25 09:46:22 rdlab16 named[441]: listening on [10.10.0.1].53 (eth0)
Feb 25 09:46:22 rdlab16 named[441]: listening on [139.95.79.165].53 (eth1)
Feb 25 09:46:22 rdlab16 named[441]: Forwarding source address 
 is [0.0.0.0].1024
Feb 25 09:46:22 rdlab16 named: named startup succeeded
Feb 25 09:46:22 rdlab16 named[442]: Ready to answer queries.
Feb 25 09:46:22 rdlab16 lpd: lpd startup succeeded
Feb 25 09:46:22 rdlab16 nfs: Starting NFS services:  succeeded
Feb 25 09:46:23 rdlab16 nfs: rpc.statd startup succeeded
Feb 25 09:46:23 rdlab16 nfs: rpc.rquotad startup succeeded
Feb 25 09:46:24 rdlab16 nfs: rpc.mountd startup succeeded
Feb 25 09:46:24 rdlab16 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 
Feb 25 09:46:24 rdlab16 nfs: rpc.nfsd startup succeeded
Feb 25 09:46:24 rdlab16 keytable: Loading keymap: 
Feb 25 09:46:24 rdlab16 keytable: Loading 
 /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Feb 25 09:46:25 rdlab16 keytable: Loading system font: 
Feb 25 09:46:25 rdlab16 rc: Starting keytable succeeded
Feb 25 09:46:25 rdlab16 sendmail: sendmail startup succeeded
Feb 25 09:46:26 rdlab16 gpm: gpm startup succeeded
Feb 25 09:46:26 rdlab16 httpd: httpd startup succeeded
Feb 25 09:46:27 rdlab16 sound: Starting sound configuration: sound
Feb 25 09:46:27 rdlab16 rc: Starting sound succeeded
Feb 25 09:46:27 rdlab16 PAM_pwdb[610]: (su) session opened for 
 user xfs by (uid=0)
Feb 25 09:46:27 rdlab16 pam_xauth[610]: do_file: could not create dir /etc/X11/fs/.xauth
Feb 25 09:46:28 rdlab16 PAM_pwdb[610]: (su) session closed for user xfs
Feb 25 09:46:28 rdlab16 pam_xauth[610]: do_file: could not 
 create dir /etc/X11/fs/.xauth
Feb 25 09:46:28 rdlab16 xfs: xfs startup succeeded
Feb 25 09:46:29 rdlab16 smb: smbd startup succeeded
Feb 25 09:46:29 rdlab16 smb: nmbd startup succeeded
Feb 25 09:46:29 rdlab16 PAM_pwdb[643]: (su) session opened for 
 user news by (uid=0)
Feb 25 09:46:29 rdlab16 kernel: 139.95.74.18 sent an 
 invalid ICMP error to a broadcast. 
Feb 25 09:46:29 rdlab16 kernel: 139.95.74.30 sent an 
 invalid ICMP error to a broadcast. 
Feb 25 09:46:29 rdlab16 kernel: 139.95.74.18 sent an 
 invalid ICMP error to a broadcast. 
Feb 25 09:46:29 rdlab16 kernel: 139.95.74.30 sent an 
 invalid ICMP error to a broadcast. 
Feb 25 09:46:29 rdlab16 kernel: 139.95.74.18 sent an 
 invalid ICMP error to a broadcast. 
Feb 25 09:46:29 rdlab16 kernel: 139.95.74.30 sent an 
 invalid ICMP error to a broadcast. 
Feb 25 09:46:29 rdlab16 kernel: 139.95.71.220 sent an 
 invalid ICMP error to a broadcast. 
Feb 25 09:46:29 rdlab16 kernel: 139.95.71.220 sent an 
 invalid ICMP error to a broadcast. 
Feb 25 09:46:29 rdlab16 kernel: 139.95.73.113 sent an 
 invalid ICMP error to a broadcast. 
Feb 25 09:46:29 rdlab16 kernel: 139.95.73.113 sent an 
 invalid ICMP error to a broadcast. 
Feb 25 09:46:31 rdlab16 actived[691]: started
Feb 25 09:46:31 rdlab16 innd: SERVER descriptors 1024
Feb 25 09:46:31 rdlab16 innd: SERVER outgoing 1011
Feb 25 09:46:31 rdlab16 innd: SERVER ccsetup control:14
Feb 25 09:46:31 rdlab16 innd: SERVER lcsetup localconn:16
Feb 25 09:46:31 rdlab16 innd: SERVER rcsetup remconn:5
Feb 25 09:46:31 rdlab16 innd: SERVER bad_newsfeeds no feeding sites
Feb 25 09:46:31 rdlab16 innd: SERVER perl filtering enabled
Feb 25 09:46:31 rdlab16 innd: SERVER starting
Feb 25 09:46:31 rdlab16 PAM_pwdb[643]: (su) session closed for user news
Feb 25 09:46:31 rdlab16 linuxconf: Linuxconf final setup
Feb 25 09:46:31 rdlab16 rc: Starting linuxconf succeeded
Feb 25 09:46:32 rdlab16 rc: Starting local succeeded
Feb 25 09:46:39 rdlab16 PAM_pwdb[734]: (login) session opened 
 for user root by (uid=0)



[ Dir listing: /lib/modules/pcmcia,  using ls -lF ]
total 752
-rw-r--r--   1 root     root        14144 Feb 23 06:53 3c574_cs.o
-rw-r--r--   1 root     root        26788 Feb 23 06:53 3c575_cb.o
-rw-r--r--   1 root     root        12048 Feb 23 06:53 3c589_cs.o
-rw-r--r--   1 root     root        33836 Feb 23 06:53 aha152x_cs.o
-rw-r--r--   1 root     root        27284 Feb 23 06:53 airo.o
-rw-r--r--   1 root     root         5352 Feb 23 06:53 airo_cs.o
-rw-r--r--   1 root     root       121225 Feb 23 06:53 apa1480_cb.o
-rw-r--r--   1 root     root         4728 Feb 23 06:53 cb_enabler.o
-rw-r--r--   1 root     root        10892 Feb 23 06:53 ds.o
-rw-r--r--   1 root     root         5480 Feb 23 06:53 dummy_cs.o
-rw-r--r--   1 root     root        14964 Feb 23 06:53 epic_cb.o
-rw-r--r--   1 root     root        24070 Feb 23 06:53 fdomain_cs.o
-rw-r--r--   1 root     root         9708 Feb 23 06:53 fmvj18x_cs.o
-rw-r--r--   1 root     root        17144 Feb 23 06:53 ftl_cs.o
-rw-r--r--   1 root     root        31780 Feb 23 06:53 i82365.o
-rw-r--r--   1 root     root        21049 Feb 23 06:53 ibmtr_cs.o
-rw-r--r--   1 root     root         5644 Feb 23 06:53 ide_cs.o
-rw-r--r--   1 root     root        13180 Feb 23 06:53 iflash2+_mtd.o
-rw-r--r--   1 root     root        10764 Feb 23 06:53 iflash2_mtd.o
-rw-r--r--   1 root     root         5276 Feb 23 06:53 memory_cb.o
-rw-r--r--   1 root     root        13652 Feb 23 06:53 memory_cs.o
-rw-r--r--   1 root     root        13204 Feb 23 06:53 netwave_cs.o
-rw-r--r--   1 root     root         8584 Feb 23 06:53 nmclan_cs.o
-rw-r--r--   1 root     root         5812 Feb 23 06:53 parport_cs.o
-rw-r--r--   1 root     root        61488 Feb 23 06:53 pcmcia_core.o
-rw-r--r--   1 root     root        13012 Feb 23 06:53 pcnet_cs.o
-rw-r--r--   1 root     root        11307 Feb 23 06:53 qlogic_cs.o
-rw-r--r--   1 root     root        21932 Feb 23 06:53 ray_cs.o
-rw-r--r--   1 root     root         2640 Feb 23 06:53 serial_cb.o
-rw-r--r--   1 root     root         8036 Feb 23 06:53 serial_cs.o
-rw-r--r--   1 root     root        19988 Feb 23 06:53 smc91c92_cs.o
-rw-r--r--   1 root     root         5508 Feb 23 06:53 sram_mtd.o
-rw-r--r--   1 root     root        11832 Feb 23 06:53 tcic.o
-rw-r--r--   1 root     root        41764 Feb 23 06:53 tulip_cb.o
-rw-r--r--   1 root     root        30392 Feb 23 06:53 wavelan_cs.o
-rw-r--r--   1 root     root        25951 Feb 23 06:53 wvlan_cs.o
-rw-r--r--   1 root     root        19152 Feb 23 06:53 xirc2ps_cs.o

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 2 3 All

None The reader is an ISA PnP device and needs to be activated

Re: Question Install and config of Linksys desktop PCMRDWR reader writer and PCM100H1 card (Jeff Gembler)
Date: 2000, Feb 26
From: David Hinds <dhinds@pcmcia.sourceforge.org>

> Are the PCMCIA drivers stable and usable for what I want to do?

should be.

> Where, specifically, are the driver modules or files that support
> the Linksys internal PCMCIA reader writer Model No. PCMRDWR

It's the i82365 module.

> Where, specifically, are the driver modules or files that support
> the Linksys Eth/HPNA card Model No. PCM100H1

It's the pcnet_cs module, as shown in the supported cards list.

> So, the kernel and PCMCIA should be in sync ?
> So no need to look into the CONFIG_MODVERSIONS kernel option?

correct.

> The way things are right now, I don't get any beeps on plugging in
> or removing a PCMCIA card.  Should I?

yes.

> Should I be able to 
> verify the PCMCIA reader/writer is present (by reading registers, etc.),

yes.

> If there is more that one option for PCIC_OPTS, should they be 
> comma separated on the same line,  or should/can different lines
> be used like:
>   PCIC_OPTS="   "

One line, space separated, like PCIC_OPTS="x=1 y=2 z=3".  The
PCMCIA-HOWTO says this in section 2.3.

> 7) Changed /etc/sysconfig/pcmcia
> 
>    PCMCIA="Yes"

Use "yes".  It is case sensitive.

>    PCIC_OPTS="extra_sockets=1"

You don't have any extra sockets, but it doesn't matter.

> [ A NOTE ABOUT THE VIA VT83C469 ]

This is your main problem.  The VT83C469 in the Linksys card is a
"Plug and Play" device.  You have to use the Linux isapnp package to
configure the card before it can be detected and used by the PCMCIA
drivers.  After that, the "probe" command will see it.

-- Dave

Question Used pnpdump to produce isapnp.conf, still not there yet

Re: Question Install and config of Linksys desktop PCMRDWR reader writer and PCM100H1 card (Jeff Gembler)
Date: 2000, Mar 25
From: Jeff Gembler jeffrey.gembler

Continuing on . . .


= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

In /etc/sysconfig/pcmcia,  I have:


PCMCIA="yes"
PCIC="i82365"
PCIC_OPTS="extra_sockets=1 check_pnp_irq=1"
CORE_OPTS=


= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

I used  pnpdump > isapnp.conf  to produce file:  /etc/isapnp.conf:


# $Id: pnpdump.c,v 1.18 1999/02/14 22:47:18 fox Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
#
# Trying port address 0203
# Board 1 has serial identifier 21 05 00 00 00 18 30 21 59

# (DEBUG)
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 21 05 00 00 00 18 30 21 59)
# Vendor Id VIA3018, Serial Number 83886080, checksum 0x21.
# Version 1.0, Vendor version 0.0
# ANSI string -->VIA PCMCIA CARD<--
#
# Logical device id PNP0e00
#     Device support I/O range check register
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE VIA3018/83886080 (LD 0
#     Compatible device id PNP0e00
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x03e0
#         Maximum IO base address 0x03e3
#         IO base alignment 2 bytes
#         Number of IO addresses required: 2
# (IO 0 (SIZE 2) (BASE 0x03e0) (CHECK))
 (NAME "VIA3018/83886080[0]{VIA PCMCIA CARD     }")
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)



= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

Without making changes to isapnp.conf  if I enter isapnp isapnp.conf,  I get:

# isapnp  isapnp.conf  
Board 1 has Identity 21 05 00 00 00 18 30 21 59:  VIA3018 Serial No 83886080 [checksum 21]



If I uncomment the line
   # (ACT Y)
and enter  isapnp  isapnp.conf,   I get:

# isapnp  isapnp.conf  
Board 1 has Identity 21 05 00 00 00 18 30 21 59:  VIA3018 Serial No 83886080 [checksum 21]
VIA3018/83886080[0]{VIA PCMCIA CARD     }: --- Enabled OK



If I also uncomment the line
   # (IO 0 (SIZE 2) (BASE 0x03e0) (CHECK))
and enter  isapnp  isapnp.conf,   I get:

# isapnp  isapnp.conf  
Board 1 has Identity 21 05 00 00 00 18 30 21 59:  VIA3018 Serial No 83886080 [checksum 21]
isapnp.conf:41 -- Fatal - resource conflict allocating 2 bytes of IO at 3E0 (see isapnp.conf)
isapnp.conf:41 -- Fatal - IO range check attempted while device activated
isapnp.conf:41 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted



= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

In /proc,  cat ioports   gives:

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
e000-e007 : ide0
e008-e00f : ide1
e800-e81f : PCnet/Home 79C978
ec00-ec17 : PCnet/FAST+ 79C972



In /proc,  cat interrupts   gives:

           CPU0       
  0:     615522          XT-PIC  timer
  1:      43551          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:         97          XT-PIC  PCnet/Home 79C978
  8:          2          XT-PIC  rtc
 10:     140335          XT-PIC  PCnet/FAST+ 79C972
 12:      23777          XT-PIC  PS/2 Mouse
 13:          1          XT-PIC  fpu
 14:      91415          XT-PIC  ide0
 15:          7          XT-PIC  ide1
NMI:          0



In /proc,  cat interrupts   gives:

 4: cascade


= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

This is what /var/log/messages looks like on rebooting :


Mar 24 08:12:58 rdlab16 apmd[106]: Exiting
Mar 24 08:12:59 rdlab16 apmd: apmd shutdown succeeded
Mar 24 08:12:59 rdlab16 pcmcia: Shutting down PCMCIA services:
Mar 24 08:12:59 rdlab16 pcmcia: .
Mar 24 08:12:59 rdlab16 rc: Stopping pcmcia succeeded
Mar 24 08:12:59 rdlab16 kernel: Kernel logging (proc) stopped.
Mar 24 08:12:59 rdlab16 kernel: Kernel log daemon terminating.
Mar 24 08:13:00 rdlab16 syslog: klogd shutdown succeeded
Mar 24 08:13:00 rdlab16 exiting on signal 15


Mar 24 08:13:52 rdlab16 syslogd 1.3-3: restart.
Mar 24 08:13:52 rdlab16 syslog: syslogd startup succeeded
Mar 24 08:13:52 rdlab16 syslog: klogd startup succeeded
Mar 24 08:13:52 rdlab16 kernel: klogd 1.3-3, log source = /proc/kmsg started.
Mar 24 08:13:52 rdlab16 kernel: Inspecting /boot/System.map-2.2.5-15
Mar 24 08:13:53 rdlab16 kernel: Loaded 6721 symbols from /boot/System.map-2.2.5-15.
Mar 24 08:13:53 rdlab16 kernel: Symbols match kernel version 2.2.5.
Mar 24 08:13:53 rdlab16 kernel: Loaded 7 symbols from 2 modules.
Mar 24 08:13:53 rdlab16 kernel: Linux version 2.2.5-15 (root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 19 22:21:09 EDT 1999 
Mar 24 08:13:53 rdlab16 kernel: Detected 451035619 Hz processor. 
Mar 24 08:13:53 rdlab16 kernel: Console: colour VGA+ 80x25 
Mar 24 08:13:53 rdlab16 kernel: Calibrating delay loop... 897.84 BogoMIPS 
Mar 24 08:13:53 rdlab16 kernel: Memory: 63140k/65536k available (996k kernel code, 412k reserved, 928k data, 60k init) 
Mar 24 08:13:53 rdlab16 kernel: VFS: Diskquotas version dquot_6.4.0 initialized 
Mar 24 08:13:53 rdlab16 kernel: CPU: AMD AMD-K6(tm) 3D processor stepping 0c 
Mar 24 08:13:53 rdlab16 kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting. 
Mar 24 08:13:53 rdlab16 kernel: Checking 'hlt' instruction... OK. 
Mar 24 08:13:53 rdlab16 kernel: POSIX conformance testing by UNIFIX 
Mar 24 08:13:53 rdlab16 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb290 
Mar 24 08:13:53 rdlab16 kernel: PCI: Using configuration type 1 
Mar 24 08:13:53 rdlab16 kernel: PCI: Probing PCI hardware 
Mar 24 08:13:53 rdlab16 kernel: PCI: 00:38 [1106/0586]: Work around ISA DMA hangs (00) 
Mar 24 08:13:53 rdlab16 kernel: Activating ISA DMA hang workarounds. 
Mar 24 08:13:53 rdlab16 kernel: Linux NET4.0 for Linux 2.2 
Mar 24 08:13:53 rdlab16 kernel: Based upon Swansea University Computer Society NET3.039 
Mar 24 08:13:53 rdlab16 kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0. 
Mar 24 08:13:53 rdlab16 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 
Mar 24 08:13:53 rdlab16 kernel: IP Protocols: ICMP, UDP, TCP, IGMP 
Mar 24 08:13:53 rdlab16 kernel: Initializing RT netlink socket 
Mar 24 08:13:53 rdlab16 kernel: Starting kswapd v 1.5  
Mar 24 08:13:53 rdlab16 kernel: Detected PS/2 Mouse Port. 
Mar 24 08:13:53 rdlab16 kernel: Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled 
Mar 24 08:13:53 rdlab16 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A 
Mar 24 08:13:53 rdlab16 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A 
Mar 24 08:13:53 rdlab16 kernel: pty: 256 Unix98 ptys configured 
Mar 24 08:13:53 rdlab16 kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9) 
Mar 24 08:13:53 rdlab16 kernel: Real Time Clock Driver v1.09 
Mar 24 08:13:53 rdlab16 kernel: RAM disk driver initialized:  16 RAM disks of 4096K size 
Mar 24 08:13:53 rdlab16 kernel: VP_IDE: IDE controller on PCI bus 00 dev 39 
Mar 24 08:13:53 rdlab16 kernel: VP_IDE: not 100% native mode: will probe irqs later 
Mar 24 08:13:53 rdlab16 kernel:     ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA 
Mar 24 08:13:53 rdlab16 kernel:     ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA 
Mar 24 08:13:53 rdlab16 kernel: hda: QUANTUM FIREBALL EX3.2A, ATA DISK drive 
Mar 24 08:13:53 rdlab16 kernel: hdc: CD-ROM 40X/AKU, ATAPI CDROM drive 
Mar 24 08:13:53 rdlab16 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 
Mar 24 08:13:53 rdlab16 kernel: ide1 at 0x170-0x177,0x376 on irq 15 
Mar 24 08:13:53 rdlab16 kernel: ide1: probed IRQ 15 failed, using default. 
Mar 24 08:13:53 rdlab16 kernel: hda: QUANTUM FIREBALL EX3.2A, 3079MB w/418kB Cache, CHS=782/128/63 
Mar 24 08:13:53 rdlab16 kernel: hdc: ATAPI 40X CD-ROM drive, 128kB Cache 
Mar 24 08:13:53 rdlab16 kernel: Uniform CDROM driver Revision: 2.54 
Mar 24 08:13:53 rdlab16 kernel: Floppy drive(s): fd0 is 1.44M 
Mar 24 08:13:53 rdlab16 kernel: FDC 0 is a post-1991 82077 
Mar 24 08:13:53 rdlab16 kernel: md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 
Mar 24 08:13:53 rdlab16 kernel: raid5: measuring checksumming speed 
Mar 24 08:13:53 rdlab16 kernel: raid5: using high-speed MMX checksum routine 
Mar 24 08:13:53 rdlab16 kernel:    pII_mmx   :   939.165 MB/sec 
Mar 24 08:13:53 rdlab16 kernel:    p5_mmx    :   843.534 MB/sec 
Mar 24 08:13:53 rdlab16 kernel:    8regs     :   646.557 MB/sec 
Mar 24 08:13:53 rdlab16 kernel:    32regs    :   467.487 MB/sec 
Mar 24 08:13:53 rdlab16 kernel: using fastest function: pII_mmx (939.165 MB/sec) 
Mar 24 08:13:53 rdlab16 kernel: scsi : 0 hosts. 
Mar 24 08:13:53 rdlab16 kernel: scsi : detected total. 
Mar 24 08:13:53 rdlab16 kernel: md.c: sizeof(mdp_super_t) = 4096 
Mar 24 08:13:53 rdlab16 kernel: Partition check: 
Mar 24 08:13:53 rdlab16 kernel:  hda: hda1 hda2 < hda5 hda6 > 
Mar 24 08:13:53 rdlab16 kernel: autodetecting RAID arrays 
Mar 24 08:13:53 rdlab16 kernel: autorun ... 
Mar 24 08:13:53 rdlab16 kernel: ... autorun DONE. 
Mar 24 08:13:53 rdlab16 kernel: VFS: Mounted root (ext2 filesystem) readonly. 
Mar 24 08:13:53 rdlab16 kernel: Freeing unused kernel memory: 60k freed 
Mar 24 08:13:53 rdlab16 kernel: Adding Swap: 100764k swap-space (priority -1) 
Mar 24 08:13:53 rdlab16 kernel: PCnet-Home: PCI bios is present, checking for devices... 
Mar 24 08:13:53 rdlab16 kernel: PCnet-Home: Found PCnet/PCI at 0xe800, irq 5. 
Mar 24 08:13:53 rdlab16 kernel: PCnet-Home: pcnet32 media value 0x8081. 
Mar 24 08:13:53 rdlab16 kernel: PCnet-Home: pcnet32 media reset to 0x8081. 
Mar 24 08:13:53 rdlab16 kernel: eth0: PCnet/Home 79C978 at 0xe800, 00 90 00 03 bb 10 assigned IRQ 5. 
Mar 24 08:13:53 rdlab16 kernel: PCnet-Home: Total of 1 AMD PCnetHome Family Card(s) found. 
Mar 24 08:13:53 rdlab16 kernel: pcnet32.c: PCI bios is present, checking for devices... 
Mar 24 08:13:53 rdlab16 kernel: PCI Master Bit has not been set. Setting... 
Mar 24 08:13:53 rdlab16 kernel: Found PCnet/PCI at 0xec00, irq 10. 
Mar 24 08:13:53 rdlab16 kernel: eth1: PCnet/FAST+ 79C972 at 0xec00, 00 00 1a 18 42 c3 assigned IRQ 10. 
Mar 24 08:13:53 rdlab16 kernel: pcnet32.c:v1.11 17.1.99 tsbogend@alpha.franken.de 
Mar 24 08:13:53 rdlab16 atd: atd startup succeeded
Mar 24 08:13:41 rdlab16 rc.sysinit: Loading default keymap succeeded 
Mar 24 08:13:42 rdlab16 rc.sysinit: Setting default font succeeded 
Mar 24 08:13:42 rdlab16 swapon: swapon: warning: /dev/hda5 has insecure permissions 0660, 0600 suggested 
Mar 24 08:13:42 rdlab16 rc.sysinit: Activating swap partitions succeeded 
Mar 24 08:13:42 rdlab16 rc.sysinit: Setting hostname rdlab16.amd.com succeeded 
Mar 24 08:13:42 rdlab16 fsck: /dev/hda6: clean, 73178/759808 files, 1694112/3032032 blocks 
Mar 24 08:13:42 rdlab16 rc.sysinit: Checking root filesystem succeeded 
Mar 24 08:13:42 rdlab16 isapnp: Board 1 has Identity 21 05 00 00 00 18 30 21 59:  VIA3018 Serial No 83886080 [checksum 21] 
Mar 24 08:13:42 rdlab16 isapnp: /etc/isapnp.conf:41 -- Fatal - resource conflict allocating 2 bytes of IO at 3E0 (see /etc/isapnp.conf) 
Mar 24 08:13:42 rdlab16 isapnp: /etc/isapnp.conf:41 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted 
Mar 24 08:13:42 rdlab16 rc.sysinit: Setting up ISA PNP devices failed 
Mar 24 08:13:42 rdlab16 rc.sysinit: Remounting root filesystem in read-write mode succeeded 
Mar 24 08:13:46 rdlab16 rc.sysinit: Finding module dependencies succeeded 
Mar 24 08:13:46 rdlab16 fsck: /dev/hda1: clean, 23/5040 files, 2920/20128 blocks 
Mar 24 08:13:46 rdlab16 rc.sysinit: Checking filesystems succeeded 
Mar 24 08:13:46 rdlab16 rc.sysinit: Mounting local filesystems succeeded 
Mar 24 08:13:46 rdlab16 rc.sysinit: Turning on user and group quotas for local filesystems succeeded 
Mar 24 08:13:48 rdlab16 date: Fri Mar 24 08:13:48 PST 2000 
Mar 24 08:13:48 rdlab16 rc.sysinit: Setting clock  (utc): Fri Mar 24 08:13:48 PST 2000 succeeded 
Mar 24 08:13:48 rdlab16 rc.sysinit: Enabling swap space succeeded 
Mar 24 08:13:48 rdlab16 init: Entering runlevel: 3 
Mar 24 08:13:48 rdlab16 apmd[105]: Version 3.0beta4 (APM BIOS 1.2, Linux driver 1.9) 
Mar 24 08:13:49 rdlab16 apmd: apmd startup succeeded 
Mar 24 08:13:49 rdlab16 network: Enabling IPv4 packet forwarding succeeded 
Mar 24 08:13:51 rdlab16 network: Bringing up interface lo succeeded 
Mar 24 08:13:51 rdlab16 ifup: SIOCADDRT: Network is unreachable 
Mar 24 08:13:51 rdlab16 network: Bringing up interface eth0 succeeded 
Mar 24 08:13:52 rdlab16 network: Bringing up interface eth1 succeeded 
Mar 24 08:13:52 rdlab16 portmap: portmap startup succeeded 
Mar 24 08:13:52 rdlab16 netfs: Mounting other filesystems succeeded 
Mar 24 08:13:52 rdlab16 random: Initializing random number generator succeeded 
Mar 24 08:13:54 rdlab16 crond: crond startup succeeded
Mar 24 08:13:54 rdlab16 pcmcia: Starting PCMCIA services:
Mar 24 08:13:54 rdlab16 pcmcia:  modules
Mar 24 08:13:54 rdlab16 kernel: Linux PCMCIA Card Services 3.1.11 
Mar 24 08:13:54 rdlab16 kernel:   kernel build: 2.2.5-15 #1 Mon Apr 19 22:21:09 EDT 1999 
Mar 24 08:13:54 rdlab16 kernel:   options:  [pci] [cardbus] [apm] [pnp] 
Mar 24 08:13:54 rdlab16 kernel: PCI routing table version 1.0 at 0xfdc40 
Mar 24 08:13:54 rdlab16 kernel:   unknown PCI interrupt router 1106:0586 
Mar 24 08:13:54 rdlab16 kernel: PnP: PNP BIOS installation structure at 0xc00fbea0 
Mar 24 08:13:54 rdlab16 kernel: PnP: PNP BIOS version 1.0, entry at f0000:bec8, dseg at f0000 
Mar 24 08:13:54 rdlab16 pcmcia: /lib/modules/2.2.5-15/pcmcia/i82365.o: 
Mar 24 08:13:54 rdlab16 pcmcia: invalid parameter check_pnp_irq
Mar 24 08:13:54 rdlab16 kernel: ds: no socket drivers loaded! 
Mar 24 08:13:54 rdlab16 pcmcia: 
Mar 24 08:13:54 rdlab16 pcmcia: /lib/modules/2.2.5-15/pcmcia/ds.o: 
Mar 24 08:13:54 rdlab16 pcmcia: init_module: Device or resource busy
Mar 24 08:13:54 rdlab16 pcmcia: 
Mar 24 08:13:54 rdlab16 pcmcia:  cardmgr.
Mar 24 08:13:54 rdlab16 rc: Starting pcmcia succeeded
Mar 24 08:13:54 rdlab16 cardmgr[417]: starting, version is 3.1.11
Mar 24 08:13:54 rdlab16 cardmgr[417]: no pcmcia driver in /proc/devices
Mar 24 08:13:54 rdlab16 cardmgr[417]: exiting
Mar 24 08:13:54 rdlab16 inet: inetd startup succeeded
Mar 24 08:13:55 rdlab16 named[444]: starting.  named 8.2 Wed Mar 31 10:57:12 EST 1999 ^Iroot@porky.devel.redhat.com:/usr/src/bs/BUILD/bind-8.2/src/bin/named
Mar 24 08:13:55 rdlab16 named[444]: cache zone "" (IN) loaded (serial 0)
Mar 24 08:13:55 rdlab16 named[444]: Zone "0.0.127.in-addr.arpa" (file named.local): No default TTL set using SOA minimum instead
Mar 24 08:13:55 rdlab16 named[444]: master zone "0.0.127.in-addr.arpa" (IN) loaded (serial 1997022700)
Mar 24 08:13:55 rdlab16 named[444]: listening on [127.0.0.1].53 (lo)
Mar 24 08:13:55 rdlab16 named[444]: listening on [10.10.0.1].53 (eth0)
Mar 24 08:13:55 rdlab16 named[444]: listening on [139.95.79.165].53 (eth1)
Mar 24 08:13:55 rdlab16 named[444]: Forwarding source address is [0.0.0.0].1024
Mar 24 08:13:55 rdlab16 named: named startup succeeded
Mar 24 08:13:55 rdlab16 named[445]: Ready to answer queries.
Mar 24 08:13:55 rdlab16 lpd: lpd startup succeeded
Mar 24 08:13:55 rdlab16 nfs: Starting NFS services:  succeeded
Mar 24 08:13:56 rdlab16 nfs: rpc.statd startup succeeded
Mar 24 08:13:56 rdlab16 nfs: rpc.rquotad startup succeeded
Mar 24 08:13:56 rdlab16 nfs: rpc.mountd startup succeeded
Mar 24 08:13:57 rdlab16 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 
Mar 24 08:13:57 rdlab16 nfs: rpc.nfsd startup succeeded
Mar 24 08:13:57 rdlab16 dhcpd: Internet Software Consortium DHCPD $Name: V2-BETA-1-PATCHLEVEL-6 $
Mar 24 08:13:57 rdlab16 dhcpd: Copyright 1995, 1996, 1997, 1998 The Internet Software Consortium.
Mar 24 08:13:57 rdlab16 dhcpd: All rights reserved.
Mar 24 08:13:57 rdlab16 dhcpd: Internet Software Consortium DHCPD $Name: V2-BETA-1-PATCHLEVEL-6 $
Mar 24 08:13:57 rdlab16 dhcpd: Copyright 1995, 1996, 1997, 1998 The Internet Software Consortium.
Mar 24 08:13:57 rdlab16 dhcpd: Listening on Socket/eth1/139.95.79.0
Mar 24 08:13:57 rdlab16 dhcpd: Sending on   Socket/eth1/139.95.79.0
Mar 24 08:13:57 rdlab16 dhcpd: All rights reserved.
Mar 24 08:13:57 rdlab16 dhcpd: Listening on Socket/eth1/139.95.79.0
Mar 24 08:13:57 rdlab16 dhcpd: Sending on   Socket/eth1/139.95.79.0
Mar 24 08:13:57 rdlab16 dhcpd: dhcpd startup succeeded
Mar 24 08:13:58 rdlab16 keytable: Loading keymap: 
Mar 24 08:13:58 rdlab16 keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Mar 24 08:13:58 rdlab16 keytable: Loading system font: 
Mar 24 08:13:58 rdlab16 rc: Starting keytable succeeded
Mar 24 08:13:59 rdlab16 sendmail: sendmail startup succeeded
Mar 24 08:13:59 rdlab16 gpm: gpm startup succeeded
Mar 24 08:14:00 rdlab16 httpd: httpd startup succeeded
Mar 24 08:14:00 rdlab16 sound: Starting sound configuration: sound
Mar 24 08:14:00 rdlab16 rc: Starting sound succeeded
Mar 24 08:14:00 rdlab16 PAM_pwdb[628]: (su) session opened for user xfs by (uid=0)
Mar 24 08:14:01 rdlab16 pam_xauth[628]: do_file: could not create dir /etc/X11/fs/.xauth
Mar 24 08:14:01 rdlab16 PAM_pwdb[628]: (su) session closed for user xfs
Mar 24 08:14:01 rdlab16 pam_xauth[628]: do_file: could not create dir /etc/X11/fs/.xauth
Mar 24 08:14:01 rdlab16 xfs: xfs startup succeeded
Mar 24 08:14:02 rdlab16 smb: smbd startup succeeded
Mar 24 08:14:02 rdlab16 smb: nmbd startup succeeded
Mar 24 08:14:02 rdlab16 kernel: 139.95.71.220 sent an invalid ICMP error to a broadcast. 
Mar 24 08:14:02 rdlab16 kernel: 139.95.71.220 sent an invalid ICMP error to a broadcast. 
Mar 24 08:14:02 rdlab16 kernel: 139.95.73.113 sent an invalid ICMP error to a broadcast. 
Mar 24 08:14:02 rdlab16 kernel: 139.95.73.113 sent an invalid ICMP error to a broadcast. 
Mar 24 08:14:02 rdlab16 kernel: 139.95.71.220 sent an invalid ICMP error to a broadcast. 
Mar 24 08:14:02 rdlab16 kernel: 139.95.73.113 sent an invalid ICMP error to a broadcast. 
Mar 24 08:14:02 rdlab16 kernel: 139.95.71.220 sent an invalid ICMP error to a broadcast. 
Mar 24 08:14:02 rdlab16 kernel: 139.95.71.220 sent an invalid ICMP error to a broadcast. 
Mar 24 08:14:02 rdlab16 kernel: 139.95.73.113 sent an invalid ICMP error to a broadcast. 
Mar 24 08:14:02 rdlab16 kernel: 139.95.73.113 sent an invalid ICMP error to a broadcast. 
Mar 24 08:14:02 rdlab16 PAM_pwdb[661]: (su) session opened for user news by (uid=0)
Mar 24 08:14:04 rdlab16 actived[710]: started
Mar 24 08:14:04 rdlab16 innd: SERVER descriptors 1024
Mar 24 08:14:04 rdlab16 innd: SERVER outgoing 1011
Mar 24 08:14:04 rdlab16 innd: SERVER ccsetup control:14
Mar 24 08:14:04 rdlab16 innd: SERVER lcsetup localconn:16
Mar 24 08:14:04 rdlab16 innd: SERVER rcsetup remconn:5
Mar 24 08:14:04 rdlab16 innd: SERVER bad_newsfeeds no feeding sites
Mar 24 08:14:04 rdlab16 innd: SERVER perl filtering enabled
Mar 24 08:14:04 rdlab16 innd: SERVER starting
Mar 24 08:14:04 rdlab16 PAM_pwdb[661]: (su) session closed for user news
Mar 24 08:14:04 rdlab16 linuxconf: Linuxconf final setup
Mar 24 08:14:05 rdlab16 rc: Starting linuxconf succeeded
Mar 24 08:14:05 rdlab16 rc: Starting local succeeded
Mar 24 08:14:09 rdlab16 PAM_pwdb[753]: (login) session opened for user root by (uid=0)


= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =


The I/O port address (of 0x03e0) that pnpdump sees looks correct (according to the 
Linksys PCMCIA document).

Why am I getting a resource conflict with isapnp ?:
  isapnp.conf:41 -- Fatal - resource conflict allocating 2 bytes of IO at 3E0 (see isapnp.conf)

Any ideas on what I should try next ?
1. None Dump the PCIC_OPTS; some things to check by David Hinds, 2000, Mar 25
2. Question Changes to /etc/sysconfig/pcmcia and more I/O port information by Jeff Gembler, 2000, Mar 25
... 1 Message(s)

None Getting close, get two beeps on inserting PCMCIA card, but can't ping

Re: Question Install and config of Linksys desktop PCMRDWR reader writer and PCM100H1 card (Jeff Gembler)
Date: 2000, Apr 05
From: Jeff Gembler jeffrey.gembler

/*****************************************************************************
*  CONTENTS OF THIS POSTING
*
*  NOTES
*   1) Changes made to files
*   2) Two High beeps
*   3) Output of probe command
*   4) Ping command
* 
* 
*  COMMAND OUTPUT
*    probe -v
*    probe -m
*    lsmod
*    ifconfig
*    ifconfig -a      (same as ifconfig)
*    cardctl config
*    cardctl ident
*    ping
* 
* 
*  FILE LISTINGS
*    isapnp.conf
*    resolv.conf
*    conf.modules
*    network.opts
*    pcmcia
*    modules
*    ioports
*    devices
*    interrupts
*    stab
*    messages
* 
*****************************************************************************/


/*=============================================================================
===  NOTES
===============================================================================

1) CHANGES MADE TO FILES
   In the file  /etc/isapnp.conf
   I removed the "(CHECK)" from the IO resource line

2) TWO HIGH BEEPS
   Now,  I get two high beeps  (not a high and a low).     Progress !!!
   The beeps happen 
     -  when I insert the Linksys PCM100H1 PCMCIA card into the 
        Linksys PCMRDWR reader/writer,  and
     -  on booting of Linux and starting PCMCIA services

3) OUTPUT OF probe -v COMMAND    (perhaps a trivial note)
   The output of the probe -v command is different now.
   It used to list information for
     -  PCI bridge probe:
     -  Intel PCIC probe: 
     -  Databook TCID-2 probe:

   Now it just lists information for:
     -  PCI bridge probe:
     -  Intel PCIC probe: 
   Maybe that is because it stops after finding something 
   (something other than "not found").

4) THE ping COMMAND
   Looks like I'm getting close (because now I get the two high beeps).

   Ping still doesn't work.
   The PC with the Linksys PCM100H1 PCMCIA card interfaces to a small local
   HPNA network,  of 3 PCs total.
   The other two PCs (they have PCI NICs for HPNA) can ping each other,
   but the PC with the PCMCIA interface can't ping or be pinged.

   From what I've read,  the /etc/pcmcia/network.opts  file should be suspect.


   The details of command outputs (including ping) and several file 
   listings are shown below.



/*=============================================================================
===  COMMAND OUTPUT
===============================================================================



===   OUTPUT OF  probe -v   ===================================================

PCI bridge probe: not found.
Intel PCIC probe: 
  ident(0)=0x82  ident(1)=0x82
  VIA VT83C469 found, 2 sockets.


===   OUTPUT OF  probe -m   ===================================================

i82365


===   OUTPUT OF  lsmod     ====================================================

Module                  Size  Used by
pcnet_cs                8248   1 
8390                    5892   0  [pcnet_cs]
ds                      6088   2  [pcnet_cs]
i82365                 20396   2 
pcmcia_core            42624   0  [pcnet_cs ds i82365]
pcnet32                 9628   2  (autoclean)


===   OUTPUT OF  ifconfig   ===================================================

eth0      Link encap:Ethernet  HWaddr 00:90:00:03:BB:10  
          inet addr:10.10.0.1  Bcast:10.255.255.255  Mask:255.0.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:5 Base address:0xe800 

eth1      Link encap:Ethernet  HWaddr 00:00:1A:18:42:C3  
          inet addr:139.95.79.165  Bcast:139.95.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:18357 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:10 Base address:0xec00 

eth2      Link encap:Ethernet  HWaddr 00:E0:98:77:32:ED  
          inet addr:10.20.0.1  Bcast:10.20.255.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:3 Base address:0x300 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 


===   OUTPUT OF  ifconfig -a    (same as ifconfig)   ==========================

eth0      Link encap:Ethernet  HWaddr 00:90:00:03:BB:10  
          inet addr:10.10.0.1  Bcast:10.255.255.255  Mask:255.0.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:5 Base address:0xe800 

eth1      Link encap:Ethernet  HWaddr 00:00:1A:18:42:C3  
          inet addr:139.95.79.165  Bcast:139.95.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:19190 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:10 Base address:0xec00 

eth2      Link encap:Ethernet  HWaddr 00:E0:98:77:32:ED  
          inet addr:10.20.0.1  Bcast:10.20.255.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:3 Base address:0x300 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 


===   OUTPUT OF  cardctl config   =============================================

Socket 0:
  Vcc 5.0V  Vpp1 0.0V  Vpp2 0.0V
  interface type is "memory and I/O"
  irq 3 [exclusive] [level]
  function 0:
    config base 0x0400
      option 0x50
    io 0x0300-0x031f [auto]
Socket 1:
  not configured


===   OUTPUT OF  cardctl ident   ==============================================

Socket 0:
  product info: "Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", "1.0", " "
  manfid: 0x0149, 0xc1ab
  function: 6 (network)
Socket 1:
  no product info available


===   OUTPUT OF  ping   =======================================================

[root@rdlab16 /etc]# ping 10.20.0.3
PING 10.20.0.3 (10.20.0.3) from 10.20.0.1 : 56(84) bytes of data.
From 10.20.0.1: Destination Host Unreachable
From 10.20.0.1: Destination Host Unreachable
From 10.20.0.1: Destination Host Unreachable

--- 10.20.0.3 ping statistics ---
5 packets transmitted, 0 packets received, +3 errors, 100% packet loss
[root@rdlab16 /etc]# 
[root@rdlab16 /etc]# 


 
/*=============================================================================
===  FILE LISTINGS
===============================================================================


===  FILE LISTING FOR   /etc/isapnp.conf   ====================================

# $Id: pnpdump.c,v 1.18 1999/02/14 22:47:18 fox Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
#
# Trying port address 0203
# Board 1 has serial identifier 21 05 00 00 00 18 30 21 59

# (DEBUG)
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 21 05 00 00 00 18 30 21 59)
# Vendor Id VIA3018, Serial Number 83886080, checksum 0x21.
# Version 1.0, Vendor version 0.0
# ANSI string -->VIA PCMCIA CARD<--
#
# Logical device id PNP0e00
#     Device support I/O range check register
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE VIA3018/83886080 (LD 0
#     Compatible device id PNP0e00
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x03e0
#         Maximum IO base address 0x03e3
#         IO base alignment 2 bytes
#         Number of IO addresses required: 2
(IO 0 (SIZE 2) (BASE 0x03e0) )
 (NAME "VIA3018/83886080[0]{VIA PCMCIA CARD     }")
(ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)



===  FILE LISTING FOR   /etc/resolv.conf   ====================================

search amd.com 
nameserver 139.95.6.235
nameserver 139.95.27.235



===  FILE LISTING FOR   /etc/conf.modules   ===================================

alias eth0 pcnethme 
alias eth1 pcnet32 



===  FILE LISTING FOR   /etc/pcmcia/network.opts    ===========================

# Network adapter configuration
#
# The address format is "scheme,socket,instance,hwaddr".
#
# Note: the "network address" here is NOT the same as the IP address.
# See the Networking HOWTO.  In short, the network address is the IP
# address masked by the netmask.
#
case "$ADDRESS" in
*,*,*,*)
    INFO="Sample private network setup"
    # Transceiver selection, for some cards -- see 'man ifport'
    IF_PORT=""
    # Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
    BOOTP="n"
    # Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
    DHCP="n"
    # Host's IP address, netmask, network address, broadcast address
    IPADDR="10.20.0.1"
    NETMASK="255.255.255.0"
    NETWORK="10.20.0.0"
    BROADCAST="10.20.255.255"
    # Gateway address for static routing
    GATEWAY="10.20.0.1"
    # Things to add to /etc/resolv.conf for this interface
    DOMAIN=""
    SEARCH=""
    DNS_1=""
    DNS_2=""
    DNS_3=""
    # NFS mounts, should be listed in /etc/fstab
    MOUNTS=""
    # For IPX interfaces, the frame type and network number
    IPX_FRAME=""
    IPX_NETNUM=""
    # Extra stuff to do after setting up the interface
    start_fn () { return; }
    # Extra stuff to do before shutting down the interface
    stop_fn () { return; }
    ;;
esac



===  FILE LISTING FOR   /etc/sysconfig/pcmcia    ==============================

PCMCIA=yes
PCIC=i82365
PCIC_OPTS=
CORE_OPTS=



===  FILE LISTING FOR   /proc/modules    ======================================

pcnet_cs                8248   1
8390                    5892   0 [pcnet_cs]
ds                      6088   2 [pcnet_cs]
i82365                 20396   2
pcmcia_core            42624   0 [pcnet_cs ds i82365]
pcnet32                 9628   2 (autoclean)



===  FILE LISTING FOR   /proc/ioports   =======================================

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0300-031f : pcnet_cs
0376-0376 : ide1
03c0-03df : vga+
03e0-03e1 : i82365
03f6-03f6 : ide0
03f8-03ff : serial(auto)
e000-e007 : ide0
e008-e00f : ide1
e800-e81f : PCnet/Home 79C978
ec00-ec1f : PCnet/FAST+ 79C972



===  FILE LISTING FOR   /proc/devices   =======================================

Character devices:
  1 mem
  2 pty
  3 ttyp
  4 ttyS
  5 cua
  7 vcs
 10 misc
 29 fb
 36 netlink
128 ptm
136 pts
162 raw
254 pcmcia

Block devices:
  1 ramdisk
  2 fd
  3 ide0
  9 md
 22 ide1



===  FILE LISTING FOR   /proc/interrupts   ====================================

           CPU0       
  0:      71401          XT-PIC  timer
  1:       3202          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:          3          XT-PIC  pcnet_cs
  5:          4          XT-PIC  PCnet/Home 79C978
  8:          1          XT-PIC  rtc
 10:       9280          XT-PIC  PCnet/FAST+ 79C972
 12:       8201          XT-PIC  PS/2 Mouse
 13:          1          XT-PIC  fpu
 14:      92367          XT-PIC  ide0
 15:       3703          XT-PIC  ide1
NMI:          0



===  FILE LISTING FOR   /var/state/pcmcia/stab    =============================

Socket 0: NE2000 Compatible Ethernet
0	network	pcnet_cs	0	eth2
Socket 1: empty



===  FILE LISTING FOR   /var/log/messages    ==================================

Apr  4 18:31:43 rdlab16 gnome-name-server[676]: input condition is: 0x10, exiting
Apr  4 18:31:44 rdlab16 rc: Stopping keytable succeeded
Apr  4 18:31:44 rdlab16 Font Server[568]: terminating 
Apr  4 18:31:44 rdlab16 xfs: xfs shutdown succeeded
Apr  4 18:31:44 rdlab16 gpm: Shutting down gpm mouse services: 
Apr  4 18:31:44 rdlab16 gpm: gpm
Apr  4 18:31:44 rdlab16 rc: Stopping gpm succeeded
Apr  4 18:31:45 rdlab16 httpd: httpd shutdown succeeded
Apr  4 18:31:45 rdlab16 sendmail: sendmail shutdown succeeded
Apr  4 18:31:45 rdlab16 inet: inetd shutdown succeeded
Apr  4 18:31:46 rdlab16 atd: atd shutdown succeeded
Apr  4 18:31:46 rdlab16 crond: crond shutdown succeeded
Apr  4 18:31:46 rdlab16 lpd: lpd shutdown succeeded
Apr  4 18:31:46 rdlab16 dd: 1+0 records in
Apr  4 18:31:46 rdlab16 dd: 1+0 records out
Apr  4 18:31:46 rdlab16 random: Saving random seed succeeded
Apr  4 18:31:47 rdlab16 apmd: apmd shutdown succeeded
Apr  4 18:31:47 rdlab16 portmap: portmap shutdown succeeded
Apr  4 18:31:47 rdlab16 network: Shutting down interface eth0 succeeded
Apr  4 18:31:47 rdlab16 network: Shutting down interface eth1 succeeded
Apr  4 18:31:47 rdlab16 network: Disabling IPv4 automatic defragmentation succeeded
Apr  4 18:31:47 rdlab16 pcmcia: Shutting down PCMCIA services:
Apr  4 18:31:47 rdlab16 cardmgr[432]: executing: './network check eth2'
Apr  4 18:31:47 rdlab16 pcmcia:  cardmgr
Apr  4 18:31:47 rdlab16 cardmgr[432]: shutting down socket 0
Apr  4 18:31:47 rdlab16 cardmgr[432]: executing: './network stop eth2'
Apr  4 18:31:48 rdlab16 cardmgr[432]: executing: 'rmmod pcnet_cs'
Apr  4 18:31:48 rdlab16 cardmgr[432]: executing: 'rmmod 8390'
Apr  4 18:31:48 rdlab16 cardmgr[432]: exiting
Apr  4 18:31:49 rdlab16 pcmcia:  modules
Apr  4 18:31:49 rdlab16 kernel: unloading PCMCIA Card Services 
Apr  4 18:31:49 rdlab16 pcmcia: .
Apr  4 18:31:49 rdlab16 rc: Stopping pcmcia succeeded
Apr  4 18:31:50 rdlab16 kernel: Kernel logging (proc) stopped.
Apr  4 18:31:50 rdlab16 kernel: Kernel log daemon terminating.



Apr  4 18:31:51 rdlab16 syslog: klogd shutdown succeeded
Apr  4 18:31:51 rdlab16 exiting on signal 15
Apr  4 18:32:46 rdlab16 syslogd 1.3-3: restart.
Apr  4 18:32:46 rdlab16 syslog: syslogd startup succeeded
Apr  4 18:32:46 rdlab16 syslog: klogd startup succeeded
Apr  4 18:32:46 rdlab16 kernel: klogd 1.3-3, log source = /proc/kmsg started.
Apr  4 18:32:46 rdlab16 kernel: Inspecting /boot/System.map-2.2.12-20
Apr  4 18:32:46 rdlab16 kernel: Loaded 6870 symbols from /boot/System.map-2.2.12-20.
Apr  4 18:32:46 rdlab16 kernel: Symbols match kernel version 2.2.12.
Apr  4 18:32:47 rdlab16 kernel: Loaded 1 symbol from 1 module.
Apr  4 18:32:47 rdlab16 kernel: Linux version 2.2.12-20 (root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Sep 27 10:25:54 EDT 1999 
Apr  4 18:32:47 rdlab16 kernel: Detected 451036188 Hz processor. 
Apr  4 18:32:47 rdlab16 kernel: Console: colour VGA+ 80x25 
Apr  4 18:32:47 rdlab16 kernel: Calibrating delay loop... 897.84 BogoMIPS 
Apr  4 18:32:47 rdlab16 kernel: Memory: 62780k/65536k available (1008k kernel code, 412k reserved, 992k data, 64k init) 
Apr  4 18:32:47 rdlab16 kernel: DENTRY hash table entries: 262144 (order: 9, 2097152 bytes) 
Apr  4 18:32:47 rdlab16 kernel: Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) 
Apr  4 18:32:47 rdlab16 kernel: Page-cache hash table entries: 16384 (order: 4, 65536 bytes) 
Apr  4 18:32:47 rdlab16 kernel: VFS: Diskquotas version dquot_6.4.0 initialized 
Apr  4 18:32:47 rdlab16 kernel: CPU: AMD AMD-K6(tm) 3D processor stepping 0c 
Apr  4 18:32:47 rdlab16 kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting. 
Apr  4 18:32:47 rdlab16 kernel: Checking 'hlt' instruction... OK. 
Apr  4 18:32:47 rdlab16 kernel: POSIX conformance testing by UNIFIX 
Apr  4 18:32:47 rdlab16 kernel: mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) 
Apr  4 18:32:47 rdlab16 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb290 
Apr  4 18:32:47 rdlab16 kernel: PCI: Using configuration type 1 
Apr  4 18:32:47 rdlab16 kernel: PCI: Probing PCI hardware 
Apr  4 18:32:47 rdlab16 kernel: PCI: 00:38 [1106/0586]: Work around ISA DMA hangs (00) 
Apr  4 18:32:47 rdlab16 kernel: Activating ISA DMA hang workarounds. 
Apr  4 18:32:47 rdlab16 kernel: Linux NET4.0 for Linux 2.2 
Apr  4 18:32:47 rdlab16 kernel: Based upon Swansea University Computer Society NET3.039 
Apr  4 18:32:47 rdlab16 kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0. 
Apr  4 18:32:47 rdlab16 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 
Apr  4 18:32:47 rdlab16 kernel: IP Protocols: ICMP, UDP, TCP, IGMP 
Apr  4 18:32:47 rdlab16 kernel: TCP: Hash tables configured (ehash 65536 bhash 65536) 
Apr  4 18:32:47 rdlab16 kernel: Initializing RT netlink socket 
Apr  4 18:32:47 rdlab16 kernel: Starting kswapd v 1.5  
Apr  4 18:32:47 rdlab16 kernel: Detected PS/2 Mouse Port. 
Apr  4 18:32:47 rdlab16 kernel: Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled 
Apr  4 18:32:47 rdlab16 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A 
Apr  4 18:32:47 rdlab16 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A 
Apr  4 18:32:47 rdlab16 kernel: pty: 256 Unix98 ptys configured 
Apr  4 18:32:47 rdlab16 kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9) 
Apr  4 18:32:47 rdlab16 kernel: Real Time Clock Driver v1.09 
Apr  4 18:32:47 rdlab16 kernel: RAM disk driver initialized:  16 RAM disks of 4096K size 
Apr  4 18:32:47 rdlab16 kernel: VP_IDE: IDE controller on PCI bus 00 dev 39 
Apr  4 18:32:47 rdlab16 kernel: VP_IDE: not 100% native mode: will probe irqs later 
Apr  4 18:32:47 rdlab16 kernel:     ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA 
Apr  4 18:32:47 rdlab16 kernel:     ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA 
Apr  4 18:32:47 rdlab16 kernel: hda: QUANTUM FIREBALL EX3.2A, ATA DISK drive 
Apr  4 18:32:47 rdlab16 kernel: hdc: CD-ROM 40X/AKU, ATAPI CDROM drive 
Apr  4 18:32:47 rdlab16 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 
Apr  4 18:32:47 rdlab16 kernel: ide1 at 0x170-0x177,0x376 on irq 15 
Apr  4 18:32:47 rdlab16 kernel: hda: QUANTUM FIREBALL EX3.2A, 3079MB w/418kB Cache, CHS=782/128/63 
Apr  4 18:32:47 rdlab16 kernel: hdc: ATAPI 40X CD-ROM drive, 128kB Cache 
Apr  4 18:32:47 rdlab16 kernel: Uniform CDROM driver Revision: 2.56 
Apr  4 18:32:47 rdlab16 kernel: Floppy drive(s): fd0 is 1.44M 
Apr  4 18:32:47 rdlab16 kernel: FDC 0 is a post-1991 82077 
Apr  4 18:32:47 rdlab16 kernel: md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 
Apr  4 18:32:47 rdlab16 kernel: raid5: measuring checksumming speed 
Apr  4 18:32:47 rdlab16 kernel: raid5: MMX detected, trying high-speed MMX checksum routines 
Apr  4 18:32:47 rdlab16 kernel:    pII_mmx   :   958.215 MB/sec 
Apr  4 18:32:47 rdlab16 kernel:    p5_mmx    :   838.581 MB/sec 
Apr  4 18:32:47 rdlab16 kernel:    8regs     :   650.748 MB/sec 
Apr  4 18:32:47 rdlab16 kernel:    32regs    :   454.152 MB/sec 
Apr  4 18:32:47 rdlab16 kernel: using fastest function: pII_mmx (958.215 MB/sec) 
Apr  4 18:32:47 rdlab16 kernel: scsi : 0 hosts. 
Apr  4 18:32:47 rdlab16 kernel: scsi : detected total. 
Apr  4 18:32:47 rdlab16 kernel: md.c: sizeof(mdp_super_t) = 4096 
Apr  4 18:32:47 rdlab16 kernel: Partition check: 
Apr  4 18:32:47 rdlab16 kernel:  hda: hda1 hda2 < hda5 hda6 > 
Apr  4 18:32:47 rdlab16 kernel: RAMDISK: Compressed image found at block 0 
Apr  4 18:32:47 rdlab16 kernel: autodetecting RAID arrays 
Apr  4 18:32:47 rdlab16 kernel: autorun ... 
Apr  4 18:32:47 rdlab16 kernel: ... autorun DONE. 
Apr  4 18:32:47 rdlab16 kernel: VFS: Mounted root (ext2 filesystem). 
Apr  4 18:32:47 rdlab16 kernel: autodetecting RAID arrays 
Apr  4 18:32:47 rdlab16 kernel: autorun ... 
Apr  4 18:32:47 rdlab16 kernel: ... autorun DONE. 
Apr  4 18:32:47 rdlab16 kernel: VFS: Mounted root (ext2 filesystem) readonly. 
Apr  4 18:32:47 rdlab16 kernel: change_root: old root has d_count=1 
Apr  4 18:32:47 rdlab16 kernel: Trying to unmount old root ... okay 
Apr  4 18:32:47 rdlab16 kernel: Freeing unused kernel memory: 64k freed 
Apr  4 18:32:47 rdlab16 kernel: Adding Swap: 100760k swap-space (priority -1) 
Apr  4 18:32:47 rdlab16 kernel: pcnet32.c: PCI bios is present, checking for devices... 
Apr  4 18:32:47 rdlab16 kernel: Found PCnet/PCI at 0xe800, irq 5. 
Apr  4 18:32:47 rdlab16 kernel: eth0: PCnet/Home 79C978 at 0xe800, 00 90 00 03 bb 10 assigned IRQ 5. 
Apr  4 18:32:47 rdlab16 kernel: pcnet32.c:v1.23 6.7.1999 tsbogend@alpha.franken.de 
Apr  4 18:32:47 rdlab16 kernel: PCI Master Bit has not been set. Setting... 
Apr  4 18:32:47 rdlab16 kernel: Found PCnet/PCI at 0xec00, irq 10. 
Apr  4 18:32:47 rdlab16 kernel: eth1: PCnet/FAST+ 79C972 at 0xec00, 00 00 1a 18 42 c3 assigned IRQ 10. 
Apr  4 18:32:47 rdlab16 kernel: pcnet32.c:v1.23 6.7.1999 tsbogend@alpha.franken.de 
Apr  4 18:32:47 rdlab16 atd: atd startup succeeded
Apr  4 18:32:47 rdlab16 crond: crond startup succeeded
Apr  4 18:32:48 rdlab16 pcmcia: Starting PCMCIA services:
Apr  4 18:32:48 rdlab16 pcmcia:  modules
Apr  4 18:32:48 rdlab16 kernel: Linux PCMCIA Card Services 3.1.11 
Apr  4 18:32:48 rdlab16 kernel:   kernel build: 2.2.12-20 #1 Mon Sep 27 10:25:54 EDT 1999 
Apr  4 18:32:48 rdlab16 kernel:   options:  [pci] [cardbus] [apm] 
Apr  4 18:32:48 rdlab16 kernel: PCI routing table version 1.0 at 0xfdc40 
Apr  4 18:32:48 rdlab16 kernel:   unknown PCI interrupt router 1106:0586 
Apr  4 18:32:48 rdlab16 kernel: Intel PCIC probe:  
Apr  4 18:32:48 rdlab16 kernel:   VIA VT83C469 ISA-to-PCMCIA at port 0x3e0 ofs 0x00 
Apr  4 18:32:48 rdlab16 kernel:     host opts [0]: [ring] 
Apr  4 18:32:48 rdlab16 kernel:     host opts [1]: [ring] 
Apr  4 18:32:48 rdlab16 kernel:     ISA irqs (default) = 3,4,7,9,12 polling interval = 1000 ms 
Apr  4 18:32:48 rdlab16 pcmcia:  cardmgr.
Apr  4 18:32:48 rdlab16 rc: Starting pcmcia succeeded
Apr  4 18:32:48 rdlab16 cardmgr[430]: starting, version is 3.1.11
Apr  4 18:32:48 rdlab16 cardmgr[430]: watching 2 sockets
Apr  4 18:32:48 rdlab16 kernel: cs: IO port probe 0x1000-0x17ff: clean. 
Apr  4 18:32:48 rdlab16 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 
Apr  4 18:32:48 rdlab16 kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
Apr  4 18:32:48 rdlab16 inet: inetd startup succeeded
Apr  4 18:32:48 rdlab16 cardmgr[430]: initializing socket 0
Apr  4 18:32:48 rdlab16 cardmgr[430]: socket 0: NE2000 Compatible Ethernet
Apr  4 18:32:48 rdlab16 kernel: cs: memory probe 0x0d0000-0x0dffff: clean. 
Apr  4 18:32:48 rdlab16 lpd: lpd startup succeeded
Apr  4 18:32:48 rdlab16 cardmgr[430]: executing: 'insmod /lib/modules/2.2.12-20/net/8390.o'
Apr  4 18:32:48 rdlab16 cardmgr[430]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/pcnet_cs.o'
Apr  4 18:32:49 rdlab16 kernel: eth2: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:E0:98:77:32:ED 
Apr  4 18:32:49 rdlab16 cardmgr[430]: executing: './network start eth2'
Apr  4 18:32:49 rdlab16 keytable: Loading keymap: Loading system font: 
Apr  4 18:32:49 rdlab16 rc: Starting keytable succeeded
Apr  4 18:32:50 rdlab16 sendmail: sendmail startup succeeded
Apr  4 18:32:50 rdlab16 gpm: gpm startup succeeded
Apr  4 18:32:51 rdlab16 httpd: httpd startup succeeded
Apr  4 18:32:51 rdlab16 xfs: xfs startup succeeded
Apr  4 18:32:52 rdlab16 linuxconf: Linuxconf final setup
Apr  4 18:32:52 rdlab16 xfs: Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist. 
Apr  4 18:32:52 rdlab16 xfs:          Entry deleted from font path. 
Apr  4 18:32:53 rdlab16 rc: Starting linuxconf succeeded
Apr  4 18:32:59 rdlab16 PAM_pwdb[606]: (login) session opened for user root by LOGIN(uid=0)
1. None I think you're right: bad network configuration by David Hinds, 2000, Apr 05

None Linksys PCM100H1 Ethernet connection works, but not HPNA

Re: Question Install and config of Linksys desktop PCMRDWR reader writer and PCM100H1 card (Jeff Gembler)
Date: 2000, Apr 05
From: Jeff Gembler jeffrey.gembler

Getting real close now.

I changed the IP addresses so that 

  -  On the Linux PC,  the Linksys PCMCIA card Model No. PCM100H1  has an IP address  
     of  172.16.0.1       ( instead of 10.20.0.1 )

  -  the Win 98 PC that Iím trying to ping has a Diamond Mulmedia  Eth / HPNA card,   
     I set the IP address there to  172.16.0.3

The Ethernet connection works,  both PCs can ping each other.

The HPNA connection does not work.  I unplug the Eth cable from both PCs and plug in the 
HPNA phone  line  (straight thru phone line).    When I try the pings with HPNA I get the 
destination host unreachable message.

Note:  The HPNA connection on the Win 98 machine does work with another Win 98 machine.


Does the Linksys PCM100H1 card need to be,  or can it be,   configured to auto-select the interface ?
Or can it be set to be HPNA only ?    
From Linux ?

From reading the Linksys documentation,  I had thought and hoped that the 
interface would auto-select.

1. None For HPNA, you are in uncharted territory by David Hinds, 2000, Apr 05
2. Question Can I do something to get HPNA to work ? by Jeff Gembler, 2000, Apr 06
... 1 Message(s)
Install and config of Linksys desktop PCMRDWR reader writer and PCM100H1 card


Add Message to: "Install and config of Linksys desktop PCMRDWR reader writer and PCM100H1 card"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10