Question: Used pnpdump to produce isapnp.conf, still not there yet 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: Install and config of Linksys desktop PCMRDWR reader writer and PCM100H1 card (Jeff Gembler)
Date: 2000, Mar 25
From: Jeff Gembler jeffrey.gembler

Continuing on . . . = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = In /etc/sysconfig/pcmcia, I have: PCMCIA="yes" PCIC="i82365" PCIC_OPTS="extra_sockets=1 check_pnp_irq=1" CORE_OPTS= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = I used pnpdump > isapnp.conf to produce file: /etc/isapnp.conf: # $Id: pnpdump.c,v 1.18 1999/02/14 22:47:18 fox Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of this file format, see isapnp.conf(5) # # For latest information and FAQ on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR # # Trying port address 0203 # Board 1 has serial identifier 21 05 00 00 00 18 30 21 59 # (DEBUG) (READPORT 0x0203) (ISOLATE PRESERVE) (IDENTIFY *) (VERBOSITY 2) (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING # Card 1: (serial identifier 21 05 00 00 00 18 30 21 59) # Vendor Id VIA3018, Serial Number 83886080, checksum 0x21. # Version 1.0, Vendor version 0.0 # ANSI string -->VIA PCMCIA CARD<-- # # Logical device id PNP0e00 # Device support I/O range check register # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE VIA3018/83886080 (LD 0 # Compatible device id PNP0e00 # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x03e0 # Maximum IO base address 0x03e3 # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 0 (SIZE 2) (BASE 0x03e0) (CHECK)) (NAME "VIA3018/83886080[0]{VIA PCMCIA CARD }") # (ACT Y) )) # End tag... Checksum 0x00 (OK) # Returns all cards to the "Wait for Key" state (WAITFORKEY) = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Without making changes to isapnp.conf if I enter isapnp isapnp.conf, I get: # isapnp isapnp.conf Board 1 has Identity 21 05 00 00 00 18 30 21 59: VIA3018 Serial No 83886080 [checksum 21] If I uncomment the line # (ACT Y) and enter isapnp isapnp.conf, I get: # isapnp isapnp.conf Board 1 has Identity 21 05 00 00 00 18 30 21 59: VIA3018 Serial No 83886080 [checksum 21] VIA3018/83886080[0]{VIA PCMCIA CARD }: --- Enabled OK If I also uncomment the line # (IO 0 (SIZE 2) (BASE 0x03e0) (CHECK)) and enter isapnp isapnp.conf, I get: # isapnp isapnp.conf Board 1 has Identity 21 05 00 00 00 18 30 21 59: VIA3018 Serial No 83886080 [checksum 21] isapnp.conf:41 -- Fatal - resource conflict allocating 2 bytes of IO at 3E0 (see isapnp.conf) isapnp.conf:41 -- Fatal - IO range check attempted while device activated isapnp.conf:41 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = In /proc, cat ioports gives: 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(auto) 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) e000-e007 : ide0 e008-e00f : ide1 e800-e81f : PCnet/Home 79C978 ec00-ec17 : PCnet/FAST+ 79C972 In /proc, cat interrupts gives: CPU0 0: 615522 XT-PIC timer 1: 43551 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 97 XT-PIC PCnet/Home 79C978 8: 2 XT-PIC rtc 10: 140335 XT-PIC PCnet/FAST+ 79C972 12: 23777 XT-PIC PS/2 Mouse 13: 1 XT-PIC fpu 14: 91415 XT-PIC ide0 15: 7 XT-PIC ide1 NMI: 0 In /proc, cat interrupts gives: 4: cascade = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = This is what /var/log/messages looks like on rebooting : Mar 24 08:12:58 rdlab16 apmd[106]: Exiting Mar 24 08:12:59 rdlab16 apmd: apmd shutdown succeeded Mar 24 08:12:59 rdlab16 pcmcia: Shutting down PCMCIA services: Mar 24 08:12:59 rdlab16 pcmcia: . Mar 24 08:12:59 rdlab16 rc: Stopping pcmcia succeeded Mar 24 08:12:59 rdlab16 kernel: Kernel logging (proc) stopped. Mar 24 08:12:59 rdlab16 kernel: Kernel log daemon terminating. Mar 24 08:13:00 rdlab16 syslog: klogd shutdown succeeded Mar 24 08:13:00 rdlab16 exiting on signal 15 Mar 24 08:13:52 rdlab16 syslogd 1.3-3: restart. Mar 24 08:13:52 rdlab16 syslog: syslogd startup succeeded Mar 24 08:13:52 rdlab16 syslog: klogd startup succeeded Mar 24 08:13:52 rdlab16 kernel: klogd 1.3-3, log source = /proc/kmsg started. Mar 24 08:13:52 rdlab16 kernel: Inspecting /boot/System.map-2.2.5-15 Mar 24 08:13:53 rdlab16 kernel: Loaded 6721 symbols from /boot/System.map-2.2.5-15. Mar 24 08:13:53 rdlab16 kernel: Symbols match kernel version 2.2.5. Mar 24 08:13:53 rdlab16 kernel: Loaded 7 symbols from 2 modules. Mar 24 08:13:53 rdlab16 kernel: Linux version 2.2.5-15 (root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 19 22:21:09 EDT 1999 Mar 24 08:13:53 rdlab16 kernel: Detected 451035619 Hz processor. Mar 24 08:13:53 rdlab16 kernel: Console: colour VGA+ 80x25 Mar 24 08:13:53 rdlab16 kernel: Calibrating delay loop... 897.84 BogoMIPS Mar 24 08:13:53 rdlab16 kernel: Memory: 63140k/65536k available (996k kernel code, 412k reserved, 928k data, 60k init) Mar 24 08:13:53 rdlab16 kernel: VFS: Diskquotas version dquot_6.4.0 initialized Mar 24 08:13:53 rdlab16 kernel: CPU: AMD AMD-K6(tm) 3D processor stepping 0c Mar 24 08:13:53 rdlab16 kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Mar 24 08:13:53 rdlab16 kernel: Checking 'hlt' instruction... OK. Mar 24 08:13:53 rdlab16 kernel: POSIX conformance testing by UNIFIX Mar 24 08:13:53 rdlab16 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb290 Mar 24 08:13:53 rdlab16 kernel: PCI: Using configuration type 1 Mar 24 08:13:53 rdlab16 kernel: PCI: Probing PCI hardware Mar 24 08:13:53 rdlab16 kernel: PCI: 00:38 [1106/0586]: Work around ISA DMA hangs (00) Mar 24 08:13:53 rdlab16 kernel: Activating ISA DMA hang workarounds. Mar 24 08:13:53 rdlab16 kernel: Linux NET4.0 for Linux 2.2 Mar 24 08:13:53 rdlab16 kernel: Based upon Swansea University Computer Society NET3.039 Mar 24 08:13:53 rdlab16 kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0. Mar 24 08:13:53 rdlab16 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Mar 24 08:13:53 rdlab16 kernel: IP Protocols: ICMP, UDP, TCP, IGMP Mar 24 08:13:53 rdlab16 kernel: Initializing RT netlink socket Mar 24 08:13:53 rdlab16 kernel: Starting kswapd v 1.5 Mar 24 08:13:53 rdlab16 kernel: Detected PS/2 Mouse Port. Mar 24 08:13:53 rdlab16 kernel: Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled Mar 24 08:13:53 rdlab16 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Mar 24 08:13:53 rdlab16 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A Mar 24 08:13:53 rdlab16 kernel: pty: 256 Unix98 ptys configured Mar 24 08:13:53 rdlab16 kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9) Mar 24 08:13:53 rdlab16 kernel: Real Time Clock Driver v1.09 Mar 24 08:13:53 rdlab16 kernel: RAM disk driver initialized: 16 RAM disks of 4096K size Mar 24 08:13:53 rdlab16 kernel: VP_IDE: IDE controller on PCI bus 00 dev 39 Mar 24 08:13:53 rdlab16 kernel: VP_IDE: not 100% native mode: will probe irqs later Mar 24 08:13:53 rdlab16 kernel: ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA Mar 24 08:13:53 rdlab16 kernel: ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA Mar 24 08:13:53 rdlab16 kernel: hda: QUANTUM FIREBALL EX3.2A, ATA DISK drive Mar 24 08:13:53 rdlab16 kernel: hdc: CD-ROM 40X/AKU, ATAPI CDROM drive Mar 24 08:13:53 rdlab16 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Mar 24 08:13:53 rdlab16 kernel: ide1 at 0x170-0x177,0x376 on irq 15 Mar 24 08:13:53 rdlab16 kernel: ide1: probed IRQ 15 failed, using default. Mar 24 08:13:53 rdlab16 kernel: hda: QUANTUM FIREBALL EX3.2A, 3079MB w/418kB Cache, CHS=782/128/63 Mar 24 08:13:53 rdlab16 kernel: hdc: ATAPI 40X CD-ROM drive, 128kB Cache Mar 24 08:13:53 rdlab16 kernel: Uniform CDROM driver Revision: 2.54 Mar 24 08:13:53 rdlab16 kernel: Floppy drive(s): fd0 is 1.44M Mar 24 08:13:53 rdlab16 kernel: FDC 0 is a post-1991 82077 Mar 24 08:13:53 rdlab16 kernel: md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 Mar 24 08:13:53 rdlab16 kernel: raid5: measuring checksumming speed Mar 24 08:13:53 rdlab16 kernel: raid5: using high-speed MMX checksum routine Mar 24 08:13:53 rdlab16 kernel: pII_mmx : 939.165 MB/sec Mar 24 08:13:53 rdlab16 kernel: p5_mmx : 843.534 MB/sec Mar 24 08:13:53 rdlab16 kernel: 8regs : 646.557 MB/sec Mar 24 08:13:53 rdlab16 kernel: 32regs : 467.487 MB/sec Mar 24 08:13:53 rdlab16 kernel: using fastest function: pII_mmx (939.165 MB/sec) Mar 24 08:13:53 rdlab16 kernel: scsi : 0 hosts. Mar 24 08:13:53 rdlab16 kernel: scsi : detected total. Mar 24 08:13:53 rdlab16 kernel: md.c: sizeof(mdp_super_t) = 4096 Mar 24 08:13:53 rdlab16 kernel: Partition check: Mar 24 08:13:53 rdlab16 kernel: hda: hda1 hda2 < hda5 hda6 > Mar 24 08:13:53 rdlab16 kernel: autodetecting RAID arrays Mar 24 08:13:53 rdlab16 kernel: autorun ... Mar 24 08:13:53 rdlab16 kernel: ... autorun DONE. Mar 24 08:13:53 rdlab16 kernel: VFS: Mounted root (ext2 filesystem) readonly. Mar 24 08:13:53 rdlab16 kernel: Freeing unused kernel memory: 60k freed Mar 24 08:13:53 rdlab16 kernel: Adding Swap: 100764k swap-space (priority -1) Mar 24 08:13:53 rdlab16 kernel: PCnet-Home: PCI bios is present, checking for devices... Mar 24 08:13:53 rdlab16 kernel: PCnet-Home: Found PCnet/PCI at 0xe800, irq 5. Mar 24 08:13:53 rdlab16 kernel: PCnet-Home: pcnet32 media value 0x8081. Mar 24 08:13:53 rdlab16 kernel: PCnet-Home: pcnet32 media reset to 0x8081. Mar 24 08:13:53 rdlab16 kernel: eth0: PCnet/Home 79C978 at 0xe800, 00 90 00 03 bb 10 assigned IRQ 5. Mar 24 08:13:53 rdlab16 kernel: PCnet-Home: Total of 1 AMD PCnetHome Family Card(s) found. Mar 24 08:13:53 rdlab16 kernel: pcnet32.c: PCI bios is present, checking for devices... Mar 24 08:13:53 rdlab16 kernel: PCI Master Bit has not been set. Setting... Mar 24 08:13:53 rdlab16 kernel: Found PCnet/PCI at 0xec00, irq 10. Mar 24 08:13:53 rdlab16 kernel: eth1: PCnet/FAST+ 79C972 at 0xec00, 00 00 1a 18 42 c3 assigned IRQ 10. Mar 24 08:13:53 rdlab16 kernel: pcnet32.c:v1.11 17.1.99 tsbogend@alpha.franken.de Mar 24 08:13:53 rdlab16 atd: atd startup succeeded Mar 24 08:13:41 rdlab16 rc.sysinit: Loading default keymap succeeded Mar 24 08:13:42 rdlab16 rc.sysinit: Setting default font succeeded Mar 24 08:13:42 rdlab16 swapon: swapon: warning: /dev/hda5 has insecure permissions 0660, 0600 suggested Mar 24 08:13:42 rdlab16 rc.sysinit: Activating swap partitions succeeded Mar 24 08:13:42 rdlab16 rc.sysinit: Setting hostname rdlab16.amd.com succeeded Mar 24 08:13:42 rdlab16 fsck: /dev/hda6: clean, 73178/759808 files, 1694112/3032032 blocks Mar 24 08:13:42 rdlab16 rc.sysinit: Checking root filesystem succeeded Mar 24 08:13:42 rdlab16 isapnp: Board 1 has Identity 21 05 00 00 00 18 30 21 59: VIA3018 Serial No 83886080 [checksum 21] Mar 24 08:13:42 rdlab16 isapnp: /etc/isapnp.conf:41 -- Fatal - resource conflict allocating 2 bytes of IO at 3E0 (see /etc/isapnp.conf) Mar 24 08:13:42 rdlab16 isapnp: /etc/isapnp.conf:41 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted Mar 24 08:13:42 rdlab16 rc.sysinit: Setting up ISA PNP devices failed Mar 24 08:13:42 rdlab16 rc.sysinit: Remounting root filesystem in read-write mode succeeded Mar 24 08:13:46 rdlab16 rc.sysinit: Finding module dependencies succeeded Mar 24 08:13:46 rdlab16 fsck: /dev/hda1: clean, 23/5040 files, 2920/20128 blocks Mar 24 08:13:46 rdlab16 rc.sysinit: Checking filesystems succeeded Mar 24 08:13:46 rdlab16 rc.sysinit: Mounting local filesystems succeeded Mar 24 08:13:46 rdlab16 rc.sysinit: Turning on user and group quotas for local filesystems succeeded Mar 24 08:13:48 rdlab16 date: Fri Mar 24 08:13:48 PST 2000 Mar 24 08:13:48 rdlab16 rc.sysinit: Setting clock (utc): Fri Mar 24 08:13:48 PST 2000 succeeded Mar 24 08:13:48 rdlab16 rc.sysinit: Enabling swap space succeeded Mar 24 08:13:48 rdlab16 init: Entering runlevel: 3 Mar 24 08:13:48 rdlab16 apmd[105]: Version 3.0beta4 (APM BIOS 1.2, Linux driver 1.9) Mar 24 08:13:49 rdlab16 apmd: apmd startup succeeded Mar 24 08:13:49 rdlab16 network: Enabling IPv4 packet forwarding succeeded Mar 24 08:13:51 rdlab16 network: Bringing up interface lo succeeded Mar 24 08:13:51 rdlab16 ifup: SIOCADDRT: Network is unreachable Mar 24 08:13:51 rdlab16 network: Bringing up interface eth0 succeeded Mar 24 08:13:52 rdlab16 network: Bringing up interface eth1 succeeded Mar 24 08:13:52 rdlab16 portmap: portmap startup succeeded Mar 24 08:13:52 rdlab16 netfs: Mounting other filesystems succeeded Mar 24 08:13:52 rdlab16 random: Initializing random number generator succeeded Mar 24 08:13:54 rdlab16 crond: crond startup succeeded Mar 24 08:13:54 rdlab16 pcmcia: Starting PCMCIA services: Mar 24 08:13:54 rdlab16 pcmcia: modules Mar 24 08:13:54 rdlab16 kernel: Linux PCMCIA Card Services 3.1.11 Mar 24 08:13:54 rdlab16 kernel: kernel build: 2.2.5-15 #1 Mon Apr 19 22:21:09 EDT 1999 Mar 24 08:13:54 rdlab16 kernel: options: [pci] [cardbus] [apm] [pnp] Mar 24 08:13:54 rdlab16 kernel: PCI routing table version 1.0 at 0xfdc40 Mar 24 08:13:54 rdlab16 kernel: unknown PCI interrupt router 1106:0586 Mar 24 08:13:54 rdlab16 kernel: PnP: PNP BIOS installation structure at 0xc00fbea0 Mar 24 08:13:54 rdlab16 kernel: PnP: PNP BIOS version 1.0, entry at f0000:bec8, dseg at f0000 Mar 24 08:13:54 rdlab16 pcmcia: /lib/modules/2.2.5-15/pcmcia/i82365.o: Mar 24 08:13:54 rdlab16 pcmcia: invalid parameter check_pnp_irq Mar 24 08:13:54 rdlab16 kernel: ds: no socket drivers loaded! Mar 24 08:13:54 rdlab16 pcmcia: Mar 24 08:13:54 rdlab16 pcmcia: /lib/modules/2.2.5-15/pcmcia/ds.o: Mar 24 08:13:54 rdlab16 pcmcia: init_module: Device or resource busy Mar 24 08:13:54 rdlab16 pcmcia: Mar 24 08:13:54 rdlab16 pcmcia: cardmgr. Mar 24 08:13:54 rdlab16 rc: Starting pcmcia succeeded Mar 24 08:13:54 rdlab16 cardmgr[417]: starting, version is 3.1.11 Mar 24 08:13:54 rdlab16 cardmgr[417]: no pcmcia driver in /proc/devices Mar 24 08:13:54 rdlab16 cardmgr[417]: exiting Mar 24 08:13:54 rdlab16 inet: inetd startup succeeded Mar 24 08:13:55 rdlab16 named[444]: starting. named 8.2 Wed Mar 31 10:57:12 EST 1999 ^Iroot@porky.devel.redhat.com:/usr/src/bs/BUILD/bind-8.2/src/bin/named Mar 24 08:13:55 rdlab16 named[444]: cache zone "" (IN) loaded (serial 0) Mar 24 08:13:55 rdlab16 named[444]: Zone "0.0.127.in-addr.arpa" (file named.local): No default TTL set using SOA minimum instead Mar 24 08:13:55 rdlab16 named[444]: master zone "0.0.127.in-addr.arpa" (IN) loaded (serial 1997022700) Mar 24 08:13:55 rdlab16 named[444]: listening on [127.0.0.1].53 (lo) Mar 24 08:13:55 rdlab16 named[444]: listening on [10.10.0.1].53 (eth0) Mar 24 08:13:55 rdlab16 named[444]: listening on [139.95.79.165].53 (eth1) Mar 24 08:13:55 rdlab16 named[444]: Forwarding source address is [0.0.0.0].1024 Mar 24 08:13:55 rdlab16 named: named startup succeeded Mar 24 08:13:55 rdlab16 named[445]: Ready to answer queries. Mar 24 08:13:55 rdlab16 lpd: lpd startup succeeded Mar 24 08:13:55 rdlab16 nfs: Starting NFS services: succeeded Mar 24 08:13:56 rdlab16 nfs: rpc.statd startup succeeded Mar 24 08:13:56 rdlab16 nfs: rpc.rquotad startup succeeded Mar 24 08:13:56 rdlab16 nfs: rpc.mountd startup succeeded Mar 24 08:13:57 rdlab16 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Mar 24 08:13:57 rdlab16 nfs: rpc.nfsd startup succeeded Mar 24 08:13:57 rdlab16 dhcpd: Internet Software Consortium DHCPD $Name: V2-BETA-1-PATCHLEVEL-6 $ Mar 24 08:13:57 rdlab16 dhcpd: Copyright 1995, 1996, 1997, 1998 The Internet Software Consortium. Mar 24 08:13:57 rdlab16 dhcpd: All rights reserved. Mar 24 08:13:57 rdlab16 dhcpd: Internet Software Consortium DHCPD $Name: V2-BETA-1-PATCHLEVEL-6 $ Mar 24 08:13:57 rdlab16 dhcpd: Copyright 1995, 1996, 1997, 1998 The Internet Software Consortium. Mar 24 08:13:57 rdlab16 dhcpd: Listening on Socket/eth1/139.95.79.0 Mar 24 08:13:57 rdlab16 dhcpd: Sending on Socket/eth1/139.95.79.0 Mar 24 08:13:57 rdlab16 dhcpd: All rights reserved. Mar 24 08:13:57 rdlab16 dhcpd: Listening on Socket/eth1/139.95.79.0 Mar 24 08:13:57 rdlab16 dhcpd: Sending on Socket/eth1/139.95.79.0 Mar 24 08:13:57 rdlab16 dhcpd: dhcpd startup succeeded Mar 24 08:13:58 rdlab16 keytable: Loading keymap: Mar 24 08:13:58 rdlab16 keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz Mar 24 08:13:58 rdlab16 keytable: Loading system font: Mar 24 08:13:58 rdlab16 rc: Starting keytable succeeded Mar 24 08:13:59 rdlab16 sendmail: sendmail startup succeeded Mar 24 08:13:59 rdlab16 gpm: gpm startup succeeded Mar 24 08:14:00 rdlab16 httpd: httpd startup succeeded Mar 24 08:14:00 rdlab16 sound: Starting sound configuration: sound Mar 24 08:14:00 rdlab16 rc: Starting sound succeeded Mar 24 08:14:00 rdlab16 PAM_pwdb[628]: (su) session opened for user xfs by (uid=0) Mar 24 08:14:01 rdlab16 pam_xauth[628]: do_file: could not create dir /etc/X11/fs/.xauth Mar 24 08:14:01 rdlab16 PAM_pwdb[628]: (su) session closed for user xfs Mar 24 08:14:01 rdlab16 pam_xauth[628]: do_file: could not create dir /etc/X11/fs/.xauth Mar 24 08:14:01 rdlab16 xfs: xfs startup succeeded Mar 24 08:14:02 rdlab16 smb: smbd startup succeeded Mar 24 08:14:02 rdlab16 smb: nmbd startup succeeded Mar 24 08:14:02 rdlab16 kernel: 139.95.71.220 sent an invalid ICMP error to a broadcast. Mar 24 08:14:02 rdlab16 kernel: 139.95.71.220 sent an invalid ICMP error to a broadcast. Mar 24 08:14:02 rdlab16 kernel: 139.95.73.113 sent an invalid ICMP error to a broadcast. Mar 24 08:14:02 rdlab16 kernel: 139.95.73.113 sent an invalid ICMP error to a broadcast. Mar 24 08:14:02 rdlab16 kernel: 139.95.71.220 sent an invalid ICMP error to a broadcast. Mar 24 08:14:02 rdlab16 kernel: 139.95.73.113 sent an invalid ICMP error to a broadcast. Mar 24 08:14:02 rdlab16 kernel: 139.95.71.220 sent an invalid ICMP error to a broadcast. Mar 24 08:14:02 rdlab16 kernel: 139.95.71.220 sent an invalid ICMP error to a broadcast. Mar 24 08:14:02 rdlab16 kernel: 139.95.73.113 sent an invalid ICMP error to a broadcast. Mar 24 08:14:02 rdlab16 kernel: 139.95.73.113 sent an invalid ICMP error to a broadcast. Mar 24 08:14:02 rdlab16 PAM_pwdb[661]: (su) session opened for user news by (uid=0) Mar 24 08:14:04 rdlab16 actived[710]: started Mar 24 08:14:04 rdlab16 innd: SERVER descriptors 1024 Mar 24 08:14:04 rdlab16 innd: SERVER outgoing 1011 Mar 24 08:14:04 rdlab16 innd: SERVER ccsetup control:14 Mar 24 08:14:04 rdlab16 innd: SERVER lcsetup localconn:16 Mar 24 08:14:04 rdlab16 innd: SERVER rcsetup remconn:5 Mar 24 08:14:04 rdlab16 innd: SERVER bad_newsfeeds no feeding sites Mar 24 08:14:04 rdlab16 innd: SERVER perl filtering enabled Mar 24 08:14:04 rdlab16 innd: SERVER starting Mar 24 08:14:04 rdlab16 PAM_pwdb[661]: (su) session closed for user news Mar 24 08:14:04 rdlab16 linuxconf: Linuxconf final setup Mar 24 08:14:05 rdlab16 rc: Starting linuxconf succeeded Mar 24 08:14:05 rdlab16 rc: Starting local succeeded Mar 24 08:14:09 rdlab16 PAM_pwdb[753]: (login) session opened for user root by (uid=0) = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = The I/O port address (of 0x03e0) that pnpdump sees looks correct (according to the Linksys PCMCIA document). Why am I getting a resource conflict with isapnp ?: isapnp.conf:41 -- Fatal - resource conflict allocating 2 bytes of IO at 3E0 (see isapnp.conf) Any ideas on what I should try next ?

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

Dump the PCIC_OPTS; some things to check Re: Question: Used pnpdump to produce isapnp.conf, still not there yet (Jeff Gembler) Date: 2000, Mar 25 From: David Hinds <dhinds@pcmcia.sourceforge.org>

> PCIC_OPTS="extra_sockets=1 check_pnp_irq=1" check_pnp_irq is not a valid option for the i82365 module. You also don't need extra_sockets, unless you have multiple card readers. /proc/bus/pccard/ioport may be a more complete map of your system IO port usage. You can also use "lspnp -v". -- Dave

Question: Changes to /etc/sysconfig/pcmcia and more I/O port information Re: Question: Used pnpdump to produce isapnp.conf, still not there yet (Jeff Gembler) Date: 2000, Mar 25 From: Jeff Gembler jeffrey.gembler

I had thought that in /etc/sysconfig/pcmcia that I would want to use PCIC_OPTS="extra_sockets=1" because I have a dual-slot PCMCIA reader/writer and because the following refers to extra sockets in a docking station, although I wasn't real clear on what that meant: http://www.linux.ncsu.edu/LinuxDocProject/HOWTO/PCMCIA-HOWTO-2.html 2.3 Startup options . . . This is not a timing issue, but if you have more than one ISA-to-PCMCIA controller in your system or <<<extra sockets in a docking station >>>, the i82365 module should be loaded with the extra_sockets parameter set to 1. This should not be necessary for detection of PCI-to- PCMCIA or PCI-to-CardBus bridges. = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = I made changes to /etc/sysconfig/pcmcia use to be: PCMCIA="yes" PCIC="i82365" PCIC_OPTS="extra_sockets=1 check_pnp_irq=1" CORE_OPTS= now is: PCMCIA="yes" PCIC="i82365" PCIC_OPTS= CORE_OPTS= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = /proc/bus/pccard/ioport looks like this: 0000-000f : pnp 01 0020-0021 : pnp 00 0040-0043 : pnp 02 0060-0060 : pnp 04 0061-0061 : pnp 05 0064-0064 : pnp 04 0070-0071 : pnp 03 0081-0083 : pnp 01 0087-0087 : pnp 01 0089-008b : pnp 01 008f-0091 : pnp 01 00a0-00a1 : pnp 00 00c0-00df : pnp 01 00f0-00ff : pnp 06 0208-020f : pnp 0b 02f8-02ff : pnp 0f 0378-037f : pnp 0e 03f2-03f5 : pnp 0d 03f8-03ff : pnp 0c 0480-048f : pnp 09 04d0-04d1 : pnp 09 0cf8-0cff : pnp 09 5000-507f : pnp 09 5080-50ff : pnp 09 d000-d0ff : pci 01:00.0 e000-e00f : pci 00:07.1 e400-e41f : pci 00:07.2 e800-e81f : pci 00:08.0 ec00-ec1f : pci 00:0a.0 = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = lnpnp -v results in: 00 PNP0000 AT programmable interrupt controller irq 2 io 0x0020-0x0021 io 0x00a0-0x00a1 01 PNP0200 AT DMA controller dma 4 io 0x0000-0x000f io 0x0081-0x0083 io 0x0087-0x0087 io 0x0089-0x008b io 0x008f-0x0091 io 0x00c0-0x00df 02 PNP0100 AT system timer irq 0 io 0x0040-0x0043 03 PNP0b00 AT real-time clock irq 8 io 0x0070-0x0071 04 PNP0303 IBM enhanced keyboard (101/102-key, PS/2 mouse support) irq 1 io 0x0060-0x0060 io 0x0064-0x0064 05 PNP0800 AT-style speaker sound io 0x0061-0x0061 06 PNP0c04 Math coprocessor irq 13 io 0x00f0-0x00ff 07 PNP0c01 System board mem 0x00000000-0x0009ffff mem 0xfffe0000-0xffffffff mem 0x00100000-0x03ffffff 08 PNP0c02 Motherboard resources mem 0x000f0000-0x000f3fff mem 0x000f4000-0x000f7fff mem 0x000f8000-0x000fffff mem 0x000c8000-0x000c9fff 09 PNP0a03 PCI bus io 0x04d0-0x04d1 io 0x0cf8-0x0cff io 0x0480-0x048f io 0x5000-0x507f io 0x5080-0x50ff 0a PNP0f13 PS/2 port for PS/2-style mice irq 12 0b PNP0c02 Motherboard resources io 0x0208-0x020f 0c PNP0501 16550A-compatible COM port irq 4 io 0x03f8-0x03ff 0d PNP0700 PC standard floppy disk controller dma 2 io 0x03f2-0x03f5 irq 6 0e PNP0400 Standard LPT printer port irq 7 io 0x0378-0x037f 0f PNP0501 16550A-compatible COM port irq 3 io 0x02f8-0x02ff = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = I still get the same message when I use isapnp # isapnp isapnp.conf Board 1 has Identity 21 05 00 00 00 18 30 21 59: VIA3018 Serial No 83886080 [checksum 21] isapnp.conf:41 -- Fatal - resource conflict allocating 2 bytes of IO at 3E0 (see isapnp.conf) isapnp.conf:41 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = I still don't see the conflict. I'm wondering if I should be looking at disabling or enabling PNP at another level.

More things to try Re: Question: Changes to /etc/sysconfig/pcmcia and more I/O port information (Jeff Gembler) Date: 2000, Apr 04 From: David Hinds <dhinds@pcmcia.sourceforge.org>

I'm not sure what the problem is. The obvious things I would do are: -- before you uncommented out the IO resource line, when you ran isapnp, you got an "Enabled OK" message. Run "probe" now and see if it finds anything. -- not for any good reason, I'd try removing the "(CHECK)" from that IO resource line in the isapnp.conf file. Because I know there should be no conflict, and because the error message is complaining about an IORESCHECK error. The isapnp FAQ also suggests this. -- Dave

[ Add Message ]  to: "Used pnpdump to produce isapnp.conf, still not there yet"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]