[ Next-in-Thread ]  [ Next Message ] 

Dump the PCIC_OPTS; some things to check 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: Install and config of Linksys desktop PCMRDWR reader writer and PCM100H1 card (Jeff Gembler)
Re: Question: Used pnpdump to produce isapnp.conf, still not there yet (Jeff Gembler)
Date: 2000, Mar 25
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

> PCIC_OPTS="extra_sockets=1 check_pnp_irq=1"

check_pnp_irq is not a valid option for the i82365 module.  You also
don't need extra_sockets, unless you have multiple card readers.

/proc/bus/pccard/ioport may be a more complete map of your system IO
port usage.  You can also use "lspnp -v".

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Dump the PCIC_OPTS; some things to check

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]