I had thought that in /etc/sysconfig/pcmcia that I would want to use PCIC_OPTS="extra_sockets=1" because I have a dual-slot PCMCIA reader/writer and because the following refers to extra sockets in a docking station, although I wasn't real clear on what that meant: http://www.linux.ncsu.edu/LinuxDocProject/HOWTO/PCMCIA-HOWTO-2.html 2.3 Startup options . . . This is not a timing issue, but if you have more than one ISA-to-PCMCIA controller in your system or <<<extra sockets in a docking station >>>, the i82365 module should be loaded with the extra_sockets parameter set to 1. This should not be necessary for detection of PCI-to- PCMCIA or PCI-to-CardBus bridges. = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = I made changes to /etc/sysconfig/pcmcia use to be: PCMCIA="yes" PCIC="i82365" PCIC_OPTS="extra_sockets=1 check_pnp_irq=1" CORE_OPTS= now is: PCMCIA="yes" PCIC="i82365" PCIC_OPTS= CORE_OPTS= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = /proc/bus/pccard/ioport looks like this: 0000-000f : pnp 01 0020-0021 : pnp 00 0040-0043 : pnp 02 0060-0060 : pnp 04 0061-0061 : pnp 05 0064-0064 : pnp 04 0070-0071 : pnp 03 0081-0083 : pnp 01 0087-0087 : pnp 01 0089-008b : pnp 01 008f-0091 : pnp 01 00a0-00a1 : pnp 00 00c0-00df : pnp 01 00f0-00ff : pnp 06 0208-020f : pnp 0b 02f8-02ff : pnp 0f 0378-037f : pnp 0e 03f2-03f5 : pnp 0d 03f8-03ff : pnp 0c 0480-048f : pnp 09 04d0-04d1 : pnp 09 0cf8-0cff : pnp 09 5000-507f : pnp 09 5080-50ff : pnp 09 d000-d0ff : pci 01:00.0 e000-e00f : pci 00:07.1 e400-e41f : pci 00:07.2 e800-e81f : pci 00:08.0 ec00-ec1f : pci 00:0a.0 = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = lnpnp -v results in: 00 PNP0000 AT programmable interrupt controller irq 2 io 0x0020-0x0021 io 0x00a0-0x00a1 01 PNP0200 AT DMA controller dma 4 io 0x0000-0x000f io 0x0081-0x0083 io 0x0087-0x0087 io 0x0089-0x008b io 0x008f-0x0091 io 0x00c0-0x00df 02 PNP0100 AT system timer irq 0 io 0x0040-0x0043 03 PNP0b00 AT real-time clock irq 8 io 0x0070-0x0071 04 PNP0303 IBM enhanced keyboard (101/102-key, PS/2 mouse support) irq 1 io 0x0060-0x0060 io 0x0064-0x0064 05 PNP0800 AT-style speaker sound io 0x0061-0x0061 06 PNP0c04 Math coprocessor irq 13 io 0x00f0-0x00ff 07 PNP0c01 System board mem 0x00000000-0x0009ffff mem 0xfffe0000-0xffffffff mem 0x00100000-0x03ffffff 08 PNP0c02 Motherboard resources mem 0x000f0000-0x000f3fff mem 0x000f4000-0x000f7fff mem 0x000f8000-0x000fffff mem 0x000c8000-0x000c9fff 09 PNP0a03 PCI bus io 0x04d0-0x04d1 io 0x0cf8-0x0cff io 0x0480-0x048f io 0x5000-0x507f io 0x5080-0x50ff 0a PNP0f13 PS/2 port for PS/2-style mice irq 12 0b PNP0c02 Motherboard resources io 0x0208-0x020f 0c PNP0501 16550A-compatible COM port irq 4 io 0x03f8-0x03ff 0d PNP0700 PC standard floppy disk controller dma 2 io 0x03f2-0x03f5 irq 6 0e PNP0400 Standard LPT printer port irq 7 io 0x0378-0x037f 0f PNP0501 16550A-compatible COM port irq 3 io 0x02f8-0x02ff = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = I still get the same message when I use isapnp # isapnp isapnp.conf Board 1 has Identity 21 05 00 00 00 18 30 21 59: VIA3018 Serial No 83886080 [checksum 21] isapnp.conf:41 -- Fatal - resource conflict allocating 2 bytes of IO at 3E0 (see isapnp.conf) isapnp.conf:41 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = I still don't see the conflict. I'm wondering if I should be looking at disabling or enabling PNP at another level. |
[ Edit This Forum ]