Next-in-Thread Next Message

None Getting close, get two beeps on inserting PCMCIA card, but can't ping 

Forum: PCMCIA Installation and Configuration Issues
Re: Question Install and config of Linksys desktop PCMRDWR reader writer and PCM100H1 card (Jeff Gembler)
Date: 2000, Apr 05
From: Jeff Gembler jeffrey.gembler

/*****************************************************************************
*  CONTENTS OF THIS POSTING
*
*  NOTES
*   1) Changes made to files
*   2) Two High beeps
*   3) Output of probe command
*   4) Ping command
* 
* 
*  COMMAND OUTPUT
*    probe -v
*    probe -m
*    lsmod
*    ifconfig
*    ifconfig -a      (same as ifconfig)
*    cardctl config
*    cardctl ident
*    ping
* 
* 
*  FILE LISTINGS
*    isapnp.conf
*    resolv.conf
*    conf.modules
*    network.opts
*    pcmcia
*    modules
*    ioports
*    devices
*    interrupts
*    stab
*    messages
* 
*****************************************************************************/


/*=============================================================================
===  NOTES
===============================================================================

1) CHANGES MADE TO FILES
   In the file  /etc/isapnp.conf
   I removed the "(CHECK)" from the IO resource line

2) TWO HIGH BEEPS
   Now,  I get two high beeps  (not a high and a low).     Progress !!!
   The beeps happen 
     -  when I insert the Linksys PCM100H1 PCMCIA card into the 
        Linksys PCMRDWR reader/writer,  and
     -  on booting of Linux and starting PCMCIA services

3) OUTPUT OF probe -v COMMAND    (perhaps a trivial note)
   The output of the probe -v command is different now.
   It used to list information for
     -  PCI bridge probe:
     -  Intel PCIC probe: 
     -  Databook TCID-2 probe:

   Now it just lists information for:
     -  PCI bridge probe:
     -  Intel PCIC probe: 
   Maybe that is because it stops after finding something 
   (something other than "not found").

4) THE ping COMMAND
   Looks like I'm getting close (because now I get the two high beeps).

   Ping still doesn't work.
   The PC with the Linksys PCM100H1 PCMCIA card interfaces to a small local
   HPNA network,  of 3 PCs total.
   The other two PCs (they have PCI NICs for HPNA) can ping each other,
   but the PC with the PCMCIA interface can't ping or be pinged.

   From what I've read,  the /etc/pcmcia/network.opts  file should be suspect.


   The details of command outputs (including ping) and several file 
   listings are shown below.



/*=============================================================================
===  COMMAND OUTPUT
===============================================================================



===   OUTPUT OF  probe -v   ===================================================

PCI bridge probe: not found.
Intel PCIC probe: 
  ident(0)=0x82  ident(1)=0x82
  VIA VT83C469 found, 2 sockets.


===   OUTPUT OF  probe -m   ===================================================

i82365


===   OUTPUT OF  lsmod     ====================================================

Module                  Size  Used by
pcnet_cs                8248   1 
8390                    5892   0  [pcnet_cs]
ds                      6088   2  [pcnet_cs]
i82365                 20396   2 
pcmcia_core            42624   0  [pcnet_cs ds i82365]
pcnet32                 9628   2  (autoclean)


===   OUTPUT OF  ifconfig   ===================================================

eth0      Link encap:Ethernet  HWaddr 00:90:00:03:BB:10  
          inet addr:10.10.0.1  Bcast:10.255.255.255  Mask:255.0.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:5 Base address:0xe800 

eth1      Link encap:Ethernet  HWaddr 00:00:1A:18:42:C3  
          inet addr:139.95.79.165  Bcast:139.95.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:18357 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:10 Base address:0xec00 

eth2      Link encap:Ethernet  HWaddr 00:E0:98:77:32:ED  
          inet addr:10.20.0.1  Bcast:10.20.255.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:3 Base address:0x300 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 


===   OUTPUT OF  ifconfig -a    (same as ifconfig)   ==========================

eth0      Link encap:Ethernet  HWaddr 00:90:00:03:BB:10  
          inet addr:10.10.0.1  Bcast:10.255.255.255  Mask:255.0.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:5 Base address:0xe800 

eth1      Link encap:Ethernet  HWaddr 00:00:1A:18:42:C3  
          inet addr:139.95.79.165  Bcast:139.95.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:19190 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:10 Base address:0xec00 

eth2      Link encap:Ethernet  HWaddr 00:E0:98:77:32:ED  
          inet addr:10.20.0.1  Bcast:10.20.255.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:3 Base address:0x300 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 


===   OUTPUT OF  cardctl config   =============================================

Socket 0:
  Vcc 5.0V  Vpp1 0.0V  Vpp2 0.0V
  interface type is "memory and I/O"
  irq 3 [exclusive] [level]
  function 0:
    config base 0x0400
      option 0x50
    io 0x0300-0x031f [auto]
Socket 1:
  not configured


===   OUTPUT OF  cardctl ident   ==============================================

Socket 0:
  product info: "Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", "1.0", " "
  manfid: 0x0149, 0xc1ab
  function: 6 (network)
Socket 1:
  no product info available


===   OUTPUT OF  ping   =======================================================

[root@rdlab16 /etc]# ping 10.20.0.3
PING 10.20.0.3 (10.20.0.3) from 10.20.0.1 : 56(84) bytes of data.
From 10.20.0.1: Destination Host Unreachable
From 10.20.0.1: Destination Host Unreachable
From 10.20.0.1: Destination Host Unreachable

--- 10.20.0.3 ping statistics ---
5 packets transmitted, 0 packets received, +3 errors, 100% packet loss
[root@rdlab16 /etc]# 
[root@rdlab16 /etc]# 


 
/*=============================================================================
===  FILE LISTINGS
===============================================================================


===  FILE LISTING FOR   /etc/isapnp.conf   ====================================

# $Id: pnpdump.c,v 1.18 1999/02/14 22:47:18 fox Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
#
# Trying port address 0203
# Board 1 has serial identifier 21 05 00 00 00 18 30 21 59

# (DEBUG)
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 21 05 00 00 00 18 30 21 59)
# Vendor Id VIA3018, Serial Number 83886080, checksum 0x21.
# Version 1.0, Vendor version 0.0
# ANSI string -->VIA PCMCIA CARD<--
#
# Logical device id PNP0e00
#     Device support I/O range check register
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE VIA3018/83886080 (LD 0
#     Compatible device id PNP0e00
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x03e0
#         Maximum IO base address 0x03e3
#         IO base alignment 2 bytes
#         Number of IO addresses required: 2
(IO 0 (SIZE 2) (BASE 0x03e0) )
 (NAME "VIA3018/83886080[0]{VIA PCMCIA CARD     }")
(ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)



===  FILE LISTING FOR   /etc/resolv.conf   ====================================

search amd.com 
nameserver 139.95.6.235
nameserver 139.95.27.235



===  FILE LISTING FOR   /etc/conf.modules   ===================================

alias eth0 pcnethme 
alias eth1 pcnet32 



===  FILE LISTING FOR   /etc/pcmcia/network.opts    ===========================

# Network adapter configuration
#
# The address format is "scheme,socket,instance,hwaddr".
#
# Note: the "network address" here is NOT the same as the IP address.
# See the Networking HOWTO.  In short, the network address is the IP
# address masked by the netmask.
#
case "$ADDRESS" in
*,*,*,*)
    INFO="Sample private network setup"
    # Transceiver selection, for some cards -- see 'man ifport'
    IF_PORT=""
    # Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
    BOOTP="n"
    # Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
    DHCP="n"
    # Host's IP address, netmask, network address, broadcast address
    IPADDR="10.20.0.1"
    NETMASK="255.255.255.0"
    NETWORK="10.20.0.0"
    BROADCAST="10.20.255.255"
    # Gateway address for static routing
    GATEWAY="10.20.0.1"
    # Things to add to /etc/resolv.conf for this interface
    DOMAIN=""
    SEARCH=""
    DNS_1=""
    DNS_2=""
    DNS_3=""
    # NFS mounts, should be listed in /etc/fstab
    MOUNTS=""
    # For IPX interfaces, the frame type and network number
    IPX_FRAME=""
    IPX_NETNUM=""
    # Extra stuff to do after setting up the interface
    start_fn () { return; }
    # Extra stuff to do before shutting down the interface
    stop_fn () { return; }
    ;;
esac



===  FILE LISTING FOR   /etc/sysconfig/pcmcia    ==============================

PCMCIA=yes
PCIC=i82365
PCIC_OPTS=
CORE_OPTS=



===  FILE LISTING FOR   /proc/modules    ======================================

pcnet_cs                8248   1
8390                    5892   0 [pcnet_cs]
ds                      6088   2 [pcnet_cs]
i82365                 20396   2
pcmcia_core            42624   0 [pcnet_cs ds i82365]
pcnet32                 9628   2 (autoclean)



===  FILE LISTING FOR   /proc/ioports   =======================================

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0300-031f : pcnet_cs
0376-0376 : ide1
03c0-03df : vga+
03e0-03e1 : i82365
03f6-03f6 : ide0
03f8-03ff : serial(auto)
e000-e007 : ide0
e008-e00f : ide1
e800-e81f : PCnet/Home 79C978
ec00-ec1f : PCnet/FAST+ 79C972



===  FILE LISTING FOR   /proc/devices   =======================================

Character devices:
  1 mem
  2 pty
  3 ttyp
  4 ttyS
  5 cua
  7 vcs
 10 misc
 29 fb
 36 netlink
128 ptm
136 pts
162 raw
254 pcmcia

Block devices:
  1 ramdisk
  2 fd
  3 ide0
  9 md
 22 ide1



===  FILE LISTING FOR   /proc/interrupts   ====================================

           CPU0       
  0:      71401          XT-PIC  timer
  1:       3202          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:          3          XT-PIC  pcnet_cs
  5:          4          XT-PIC  PCnet/Home 79C978
  8:          1          XT-PIC  rtc
 10:       9280          XT-PIC  PCnet/FAST+ 79C972
 12:       8201          XT-PIC  PS/2 Mouse
 13:          1          XT-PIC  fpu
 14:      92367          XT-PIC  ide0
 15:       3703          XT-PIC  ide1
NMI:          0



===  FILE LISTING FOR   /var/state/pcmcia/stab    =============================

Socket 0: NE2000 Compatible Ethernet
0	network	pcnet_cs	0	eth2
Socket 1: empty



===  FILE LISTING FOR   /var/log/messages    ==================================

Apr  4 18:31:43 rdlab16 gnome-name-server[676]: input condition is: 0x10, exiting
Apr  4 18:31:44 rdlab16 rc: Stopping keytable succeeded
Apr  4 18:31:44 rdlab16 Font Server[568]: terminating 
Apr  4 18:31:44 rdlab16 xfs: xfs shutdown succeeded
Apr  4 18:31:44 rdlab16 gpm: Shutting down gpm mouse services: 
Apr  4 18:31:44 rdlab16 gpm: gpm
Apr  4 18:31:44 rdlab16 rc: Stopping gpm succeeded
Apr  4 18:31:45 rdlab16 httpd: httpd shutdown succeeded
Apr  4 18:31:45 rdlab16 sendmail: sendmail shutdown succeeded
Apr  4 18:31:45 rdlab16 inet: inetd shutdown succeeded
Apr  4 18:31:46 rdlab16 atd: atd shutdown succeeded
Apr  4 18:31:46 rdlab16 crond: crond shutdown succeeded
Apr  4 18:31:46 rdlab16 lpd: lpd shutdown succeeded
Apr  4 18:31:46 rdlab16 dd: 1+0 records in
Apr  4 18:31:46 rdlab16 dd: 1+0 records out
Apr  4 18:31:46 rdlab16 random: Saving random seed succeeded
Apr  4 18:31:47 rdlab16 apmd: apmd shutdown succeeded
Apr  4 18:31:47 rdlab16 portmap: portmap shutdown succeeded
Apr  4 18:31:47 rdlab16 network: Shutting down interface eth0 succeeded
Apr  4 18:31:47 rdlab16 network: Shutting down interface eth1 succeeded
Apr  4 18:31:47 rdlab16 network: Disabling IPv4 automatic defragmentation succeeded
Apr  4 18:31:47 rdlab16 pcmcia: Shutting down PCMCIA services:
Apr  4 18:31:47 rdlab16 cardmgr[432]: executing: './network check eth2'
Apr  4 18:31:47 rdlab16 pcmcia:  cardmgr
Apr  4 18:31:47 rdlab16 cardmgr[432]: shutting down socket 0
Apr  4 18:31:47 rdlab16 cardmgr[432]: executing: './network stop eth2'
Apr  4 18:31:48 rdlab16 cardmgr[432]: executing: 'rmmod pcnet_cs'
Apr  4 18:31:48 rdlab16 cardmgr[432]: executing: 'rmmod 8390'
Apr  4 18:31:48 rdlab16 cardmgr[432]: exiting
Apr  4 18:31:49 rdlab16 pcmcia:  modules
Apr  4 18:31:49 rdlab16 kernel: unloading PCMCIA Card Services 
Apr  4 18:31:49 rdlab16 pcmcia: .
Apr  4 18:31:49 rdlab16 rc: Stopping pcmcia succeeded
Apr  4 18:31:50 rdlab16 kernel: Kernel logging (proc) stopped.
Apr  4 18:31:50 rdlab16 kernel: Kernel log daemon terminating.



Apr  4 18:31:51 rdlab16 syslog: klogd shutdown succeeded
Apr  4 18:31:51 rdlab16 exiting on signal 15
Apr  4 18:32:46 rdlab16 syslogd 1.3-3: restart.
Apr  4 18:32:46 rdlab16 syslog: syslogd startup succeeded
Apr  4 18:32:46 rdlab16 syslog: klogd startup succeeded
Apr  4 18:32:46 rdlab16 kernel: klogd 1.3-3, log source = /proc/kmsg started.
Apr  4 18:32:46 rdlab16 kernel: Inspecting /boot/System.map-2.2.12-20
Apr  4 18:32:46 rdlab16 kernel: Loaded 6870 symbols from /boot/System.map-2.2.12-20.
Apr  4 18:32:46 rdlab16 kernel: Symbols match kernel version 2.2.12.
Apr  4 18:32:47 rdlab16 kernel: Loaded 1 symbol from 1 module.
Apr  4 18:32:47 rdlab16 kernel: Linux version 2.2.12-20 (root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Sep 27 10:25:54 EDT 1999 
Apr  4 18:32:47 rdlab16 kernel: Detected 451036188 Hz processor. 
Apr  4 18:32:47 rdlab16 kernel: Console: colour VGA+ 80x25 
Apr  4 18:32:47 rdlab16 kernel: Calibrating delay loop... 897.84 BogoMIPS 
Apr  4 18:32:47 rdlab16 kernel: Memory: 62780k/65536k available (1008k kernel code, 412k reserved, 992k data, 64k init) 
Apr  4 18:32:47 rdlab16 kernel: DENTRY hash table entries: 262144 (order: 9, 2097152 bytes) 
Apr  4 18:32:47 rdlab16 kernel: Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) 
Apr  4 18:32:47 rdlab16 kernel: Page-cache hash table entries: 16384 (order: 4, 65536 bytes) 
Apr  4 18:32:47 rdlab16 kernel: VFS: Diskquotas version dquot_6.4.0 initialized 
Apr  4 18:32:47 rdlab16 kernel: CPU: AMD AMD-K6(tm) 3D processor stepping 0c 
Apr  4 18:32:47 rdlab16 kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting. 
Apr  4 18:32:47 rdlab16 kernel: Checking 'hlt' instruction... OK. 
Apr  4 18:32:47 rdlab16 kernel: POSIX conformance testing by UNIFIX 
Apr  4 18:32:47 rdlab16 kernel: mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) 
Apr  4 18:32:47 rdlab16 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb290 
Apr  4 18:32:47 rdlab16 kernel: PCI: Using configuration type 1 
Apr  4 18:32:47 rdlab16 kernel: PCI: Probing PCI hardware 
Apr  4 18:32:47 rdlab16 kernel: PCI: 00:38 [1106/0586]: Work around ISA DMA hangs (00) 
Apr  4 18:32:47 rdlab16 kernel: Activating ISA DMA hang workarounds. 
Apr  4 18:32:47 rdlab16 kernel: Linux NET4.0 for Linux 2.2 
Apr  4 18:32:47 rdlab16 kernel: Based upon Swansea University Computer Society NET3.039 
Apr  4 18:32:47 rdlab16 kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0. 
Apr  4 18:32:47 rdlab16 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 
Apr  4 18:32:47 rdlab16 kernel: IP Protocols: ICMP, UDP, TCP, IGMP 
Apr  4 18:32:47 rdlab16 kernel: TCP: Hash tables configured (ehash 65536 bhash 65536) 
Apr  4 18:32:47 rdlab16 kernel: Initializing RT netlink socket 
Apr  4 18:32:47 rdlab16 kernel: Starting kswapd v 1.5  
Apr  4 18:32:47 rdlab16 kernel: Detected PS/2 Mouse Port. 
Apr  4 18:32:47 rdlab16 kernel: Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled 
Apr  4 18:32:47 rdlab16 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A 
Apr  4 18:32:47 rdlab16 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A 
Apr  4 18:32:47 rdlab16 kernel: pty: 256 Unix98 ptys configured 
Apr  4 18:32:47 rdlab16 kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9) 
Apr  4 18:32:47 rdlab16 kernel: Real Time Clock Driver v1.09 
Apr  4 18:32:47 rdlab16 kernel: RAM disk driver initialized:  16 RAM disks of 4096K size 
Apr  4 18:32:47 rdlab16 kernel: VP_IDE: IDE controller on PCI bus 00 dev 39 
Apr  4 18:32:47 rdlab16 kernel: VP_IDE: not 100% native mode: will probe irqs later 
Apr  4 18:32:47 rdlab16 kernel:     ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA 
Apr  4 18:32:47 rdlab16 kernel:     ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA 
Apr  4 18:32:47 rdlab16 kernel: hda: QUANTUM FIREBALL EX3.2A, ATA DISK drive 
Apr  4 18:32:47 rdlab16 kernel: hdc: CD-ROM 40X/AKU, ATAPI CDROM drive 
Apr  4 18:32:47 rdlab16 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 
Apr  4 18:32:47 rdlab16 kernel: ide1 at 0x170-0x177,0x376 on irq 15 
Apr  4 18:32:47 rdlab16 kernel: hda: QUANTUM FIREBALL EX3.2A, 3079MB w/418kB Cache, CHS=782/128/63 
Apr  4 18:32:47 rdlab16 kernel: hdc: ATAPI 40X CD-ROM drive, 128kB Cache 
Apr  4 18:32:47 rdlab16 kernel: Uniform CDROM driver Revision: 2.56 
Apr  4 18:32:47 rdlab16 kernel: Floppy drive(s): fd0 is 1.44M 
Apr  4 18:32:47 rdlab16 kernel: FDC 0 is a post-1991 82077 
Apr  4 18:32:47 rdlab16 kernel: md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 
Apr  4 18:32:47 rdlab16 kernel: raid5: measuring checksumming speed 
Apr  4 18:32:47 rdlab16 kernel: raid5: MMX detected, trying high-speed MMX checksum routines 
Apr  4 18:32:47 rdlab16 kernel:    pII_mmx   :   958.215 MB/sec 
Apr  4 18:32:47 rdlab16 kernel:    p5_mmx    :   838.581 MB/sec 
Apr  4 18:32:47 rdlab16 kernel:    8regs     :   650.748 MB/sec 
Apr  4 18:32:47 rdlab16 kernel:    32regs    :   454.152 MB/sec 
Apr  4 18:32:47 rdlab16 kernel: using fastest function: pII_mmx (958.215 MB/sec) 
Apr  4 18:32:47 rdlab16 kernel: scsi : 0 hosts. 
Apr  4 18:32:47 rdlab16 kernel: scsi : detected total. 
Apr  4 18:32:47 rdlab16 kernel: md.c: sizeof(mdp_super_t) = 4096 
Apr  4 18:32:47 rdlab16 kernel: Partition check: 
Apr  4 18:32:47 rdlab16 kernel:  hda: hda1 hda2 < hda5 hda6 > 
Apr  4 18:32:47 rdlab16 kernel: RAMDISK: Compressed image found at block 0 
Apr  4 18:32:47 rdlab16 kernel: autodetecting RAID arrays 
Apr  4 18:32:47 rdlab16 kernel: autorun ... 
Apr  4 18:32:47 rdlab16 kernel: ... autorun DONE. 
Apr  4 18:32:47 rdlab16 kernel: VFS: Mounted root (ext2 filesystem). 
Apr  4 18:32:47 rdlab16 kernel: autodetecting RAID arrays 
Apr  4 18:32:47 rdlab16 kernel: autorun ... 
Apr  4 18:32:47 rdlab16 kernel: ... autorun DONE. 
Apr  4 18:32:47 rdlab16 kernel: VFS: Mounted root (ext2 filesystem) readonly. 
Apr  4 18:32:47 rdlab16 kernel: change_root: old root has d_count=1 
Apr  4 18:32:47 rdlab16 kernel: Trying to unmount old root ... okay 
Apr  4 18:32:47 rdlab16 kernel: Freeing unused kernel memory: 64k freed 
Apr  4 18:32:47 rdlab16 kernel: Adding Swap: 100760k swap-space (priority -1) 
Apr  4 18:32:47 rdlab16 kernel: pcnet32.c: PCI bios is present, checking for devices... 
Apr  4 18:32:47 rdlab16 kernel: Found PCnet/PCI at 0xe800, irq 5. 
Apr  4 18:32:47 rdlab16 kernel: eth0: PCnet/Home 79C978 at 0xe800, 00 90 00 03 bb 10 assigned IRQ 5. 
Apr  4 18:32:47 rdlab16 kernel: pcnet32.c:v1.23 6.7.1999 tsbogend@alpha.franken.de 
Apr  4 18:32:47 rdlab16 kernel: PCI Master Bit has not been set. Setting... 
Apr  4 18:32:47 rdlab16 kernel: Found PCnet/PCI at 0xec00, irq 10. 
Apr  4 18:32:47 rdlab16 kernel: eth1: PCnet/FAST+ 79C972 at 0xec00, 00 00 1a 18 42 c3 assigned IRQ 10. 
Apr  4 18:32:47 rdlab16 kernel: pcnet32.c:v1.23 6.7.1999 tsbogend@alpha.franken.de 
Apr  4 18:32:47 rdlab16 atd: atd startup succeeded
Apr  4 18:32:47 rdlab16 crond: crond startup succeeded
Apr  4 18:32:48 rdlab16 pcmcia: Starting PCMCIA services:
Apr  4 18:32:48 rdlab16 pcmcia:  modules
Apr  4 18:32:48 rdlab16 kernel: Linux PCMCIA Card Services 3.1.11 
Apr  4 18:32:48 rdlab16 kernel:   kernel build: 2.2.12-20 #1 Mon Sep 27 10:25:54 EDT 1999 
Apr  4 18:32:48 rdlab16 kernel:   options:  [pci] [cardbus] [apm] 
Apr  4 18:32:48 rdlab16 kernel: PCI routing table version 1.0 at 0xfdc40 
Apr  4 18:32:48 rdlab16 kernel:   unknown PCI interrupt router 1106:0586 
Apr  4 18:32:48 rdlab16 kernel: Intel PCIC probe:  
Apr  4 18:32:48 rdlab16 kernel:   VIA VT83C469 ISA-to-PCMCIA at port 0x3e0 ofs 0x00 
Apr  4 18:32:48 rdlab16 kernel:     host opts [0]: [ring] 
Apr  4 18:32:48 rdlab16 kernel:     host opts [1]: [ring] 
Apr  4 18:32:48 rdlab16 kernel:     ISA irqs (default) = 3,4,7,9,12 polling interval = 1000 ms 
Apr  4 18:32:48 rdlab16 pcmcia:  cardmgr.
Apr  4 18:32:48 rdlab16 rc: Starting pcmcia succeeded
Apr  4 18:32:48 rdlab16 cardmgr[430]: starting, version is 3.1.11
Apr  4 18:32:48 rdlab16 cardmgr[430]: watching 2 sockets
Apr  4 18:32:48 rdlab16 kernel: cs: IO port probe 0x1000-0x17ff: clean. 
Apr  4 18:32:48 rdlab16 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 
Apr  4 18:32:48 rdlab16 kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
Apr  4 18:32:48 rdlab16 inet: inetd startup succeeded
Apr  4 18:32:48 rdlab16 cardmgr[430]: initializing socket 0
Apr  4 18:32:48 rdlab16 cardmgr[430]: socket 0: NE2000 Compatible Ethernet
Apr  4 18:32:48 rdlab16 kernel: cs: memory probe 0x0d0000-0x0dffff: clean. 
Apr  4 18:32:48 rdlab16 lpd: lpd startup succeeded
Apr  4 18:32:48 rdlab16 cardmgr[430]: executing: 'insmod /lib/modules/2.2.12-20/net/8390.o'
Apr  4 18:32:48 rdlab16 cardmgr[430]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/pcnet_cs.o'
Apr  4 18:32:49 rdlab16 kernel: eth2: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:E0:98:77:32:ED 
Apr  4 18:32:49 rdlab16 cardmgr[430]: executing: './network start eth2'
Apr  4 18:32:49 rdlab16 keytable: Loading keymap: Loading system font: 
Apr  4 18:32:49 rdlab16 rc: Starting keytable succeeded
Apr  4 18:32:50 rdlab16 sendmail: sendmail startup succeeded
Apr  4 18:32:50 rdlab16 gpm: gpm startup succeeded
Apr  4 18:32:51 rdlab16 httpd: httpd startup succeeded
Apr  4 18:32:51 rdlab16 xfs: xfs startup succeeded
Apr  4 18:32:52 rdlab16 linuxconf: Linuxconf final setup
Apr  4 18:32:52 rdlab16 xfs: Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist. 
Apr  4 18:32:52 rdlab16 xfs:          Entry deleted from font path. 
Apr  4 18:32:53 rdlab16 rc: Starting linuxconf succeeded
Apr  4 18:32:59 rdlab16 PAM_pwdb[606]: (login) session opened for user root by LOGIN(uid=0)

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None I think you're right: bad network configuration by David Hinds, 2000, Apr 05

Add Message to: "Getting close, get two beeps on inserting PCMCIA card, but can't ping"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10