Next-in-Thread Next Message

Sad IRQ 11 wedged with 3.1.11/3.1.12 on Dell Inspiron 5000 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Mar 10
From: Scott Porter porter

Hi.

I have a peculiar problem with my Dell Inspiron 5000 running Redhat 6.1/kernel 2.1.14 (TI PCI-1225). I've tried running PCMCIA 3.1.11 and 3.1.12 with PNP on/off and I seem to be able to only use socket 0. Nothing happens when I insert a card in socket 1. The pcmcia drivers report that IRQ 11 is wedged and that the IRQ scan failed. Any help would be appreciated. Here is the log:

Linux PCMCIA Card Services 3.1.12
  kernel build: 2.2.14 #4 Tue Mar 7 23:26:06 EST 2000
  options:  [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xfdf50
  00:04.0 -> irq 11
  00:04.1 -> irq 11
Intel PCIC probe: 
  TI 1225 PCI-to-CardBus at slot 00:04, mem 0x68000000
    host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 32/34]
    host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 35/37]
    PCI irq 11 seems to be wedged!
    PCI irq 11 test failed
    ISA irqs (scanned) = 3,4,7,9,10 polling interval = 1000 ms
cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.

Anybody know what is going on? Thanks!

                        -- Scott.

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None The wedged irq is not the main problem, anyway by David Hinds, 2000, Mar 10
(_ Question Was this ever resolved? by John Ruttenberg, 2000, Apr 02

Add Message to: "IRQ 11 wedged with 3.1.11/3.1.12 on Dell Inspiron 5000"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10