[ Next-in-Thread ]  [ Next Message ] 

Sad: IRQ 11 wedged with 3.1.11/3.1.12 on Dell Inspiron 5000 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Mar 10
From: Scott Porter porter

Hi.

I have a peculiar problem with my Dell Inspiron 5000 running Redhat 6.1/kernel 2.1.14 (TI PCI-1225). I've tried running PCMCIA 3.1.11 and 3.1.12 with PNP on/off and I seem to be able to only use socket 0. Nothing happens when I insert a card in socket 1. The pcmcia drivers report that IRQ 11 is wedged and that the IRQ scan failed. Any help would be appreciated. Here is the log: 

Linux PCMCIA Card Services 3.1.12
  kernel build: 2.2.14 #4 Tue Mar 7 23:26:06 EST 2000
  options:  [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xfdf50
  00:04.0 -> irq 11
  00:04.1 -> irq 11
Intel PCIC probe: 
  TI 1225 PCI-to-CardBus at slot 00:04, mem 0x68000000
    host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 32/34]
    host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 35/37]
    PCI irq 11 seems to be wedged!
    PCI irq 11 test failed
    ISA irqs (scanned) = 3,4,7,9,10 polling interval = 1000 ms
cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.

Anybody know what is going on? Thanks! 

                        -- Scott.

[ Next-in-Thread ]  [ Next Message ] 

Select this message: IRQ 11 wedged with 3.1.11/3.1.12 on Dell Inspiron 5000

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. The wedged irq is not the main problem, anyway by David Hinds, 2000, Mar 10
(_ Question: Was this ever resolved? by John Ruttenberg, 2000, Apr 02

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]