[ Next-in-Thread ]  [ Next Message ] 

Sad: This has to be an easy one... 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Mar 16
From: Chris Hobbs LancerD 

I'm attempting to build 3.1.13 on a RH6.0 box upgraded to kernel 2.2.14. When I try to 'make all', I get the following error, repeated for every file it tries to make:

make[1]: Entering directory `/usr/src/linux-2.2.14/pcmcia-cs-3.1.13/modules'
cc   -MD -O2 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include  -D__KERNEL__ -DMODULE -c cs.c
In file included from /usr/src/linux/include/linux/capability.h:13,
                 from /usr/src/linux/include/linux/binfmts.h:5,
                 from /usr/src/linux/include/linux/sched.h:8,
                 from /usr/src/linux/include/linux/vmalloc.h:4,
                 from /usr/src/linux/include/asm/io.h:101,
                 from ../include/pcmcia/k_compat.h:203,
                 from cs.c:35:
/usr/src/linux/include/linux/fs.h:786: warning: `invalidate_buffers' redefined
/usr/src/linux/include/linux/modules/ksyms.ver:122: warning: this is the location of the previous definition
In file included from ../include/asm/uaccess.h:52,
                 from ../include/pcmcia/k_compat.h:248,
                 from cs.c:35:
/usr/src/linux/include/asm/uaccess.h:600: warning: `strlen_user' redefined
/usr/src/linux/include/linux/modules/i386_ksyms.ver:56: warning: this is the location of the previous definition


I have no trouble building 3.1.10, which is running now. Any ideas?

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

What is the output of "make config"?

Re: Sad: This has to be an easy one... (Chris Hobbs)
Date: 2000, Mar 16
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

Also, does /usr/src/linux point to /usr/src/linux-2.2.14?

-- Dave

More: make config

Re: What is the output of "make config"? (David Hinds)
Date: 2000, Mar 17
From: Chris Hobbs LancerD 

First:

lrwxrwxrwx   1 root     root           12 Mar  6 18:10 linux -> linux-2.2.14

Now, for 'make config':

    -------- Linux PCMCIA Configuration Script --------

The default responses for each question are correct for most users.
Consult the PCMCIA-HOWTO for additional info about each option.

Linux source directory [/usr/src/linux]: 

The kernel source tree is version 2.2.14.
The current kernel build date is Thu Mar 16 07:13:15 2000.

Alternate target install directory []: 
Build 'trusting' versions of card utilities (y/n) [n]: 
Include 32-bit (CardBus) card support (y/n) [y]: 
Include PnP BIOS resource checking (y/n) [n]: 
Module install directory [/lib/modules/2.2.14]: 

Kernel configuration options:
    Symmetric multiprocessing support is disabled.
    PCI BIOS support is enabled.
    Advanced Power Management (APM) support is enabled.
    SCSI support is disabled.
    Networking support is enabled.
     Radio network interface support is disabled.
     Token Ring device support is disabled.
     Fast switching is disabled.
    Module version checking is enabled.
    /proc filesystem support is enabled.
    Maximum physical memory: 2GB

It looks like you have a System V init file setup.

X Windows include files found.
/usr/X11R6/lib/libforms.a and /usr/include/forms.h found.

Configuration successful.

-----

All defaults accepted. Thanks for checking this out!

Ok: Solved

Re: What is the output of "make config"? (David Hinds)
Date: 2000, Mar 17
From: Chris Hobbs LancerD

I had some sort of wackiness with my kernel sources... noticed the sam problem trying to configure VM-ware, so redownloaded the kernel source, built a new kernel, pcmcia stuff compiled with no complaints afterwards. Thanks for the help though!

This has to be an easy one...

[ Add Message ]  to: "This has to be an easy one..."

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]