Next-in-Thread Next Message

More make config 

Forum: PCMCIA Installation and Configuration Issues
Re: Sad This has to be an easy one... (Chris Hobbs)
Re: None What is the output of "make config"? (David Hinds)
Date: 2000, Mar 17
From: Chris Hobbs LancerD


lrwxrwxrwx   1 root     root           12 Mar  6 18:10 linux -> linux-2.2.14

Now, for 'make config':

    -------- Linux PCMCIA Configuration Script --------

The default responses for each question are correct for most users.
Consult the PCMCIA-HOWTO for additional info about each option.

Linux source directory [/usr/src/linux]: 

The kernel source tree is version 2.2.14.
The current kernel build date is Thu Mar 16 07:13:15 2000.

Alternate target install directory []: 
Build 'trusting' versions of card utilities (y/n) [n]: 
Include 32-bit (CardBus) card support (y/n) [y]: 
Include PnP BIOS resource checking (y/n) [n]: 
Module install directory [/lib/modules/2.2.14]: 

Kernel configuration options:
    Symmetric multiprocessing support is disabled.
    PCI BIOS support is enabled.
    Advanced Power Management (APM) support is enabled.
    SCSI support is disabled.
    Networking support is enabled.
     Radio network interface support is disabled.
     Token Ring device support is disabled.
     Fast switching is disabled.
    Module version checking is enabled.
    /proc filesystem support is enabled.
    Maximum physical memory: 2GB

It looks like you have a System V init file setup.

X Windows include files found.
/usr/X11R6/lib/libforms.a and /usr/include/forms.h found.

Configuration successful.


All defaults accepted. Thanks for checking this out!

Next-in-Thread Next Message

Select this message: make config

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]