Next-in-Thread Next Message

Question PCMCIA Problem with 3COM 3C562D/3C563D "eth0: interrupt(s) dropped" 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Mar 17
From: John Auld jxa

I have a working install of Linux (tomsrtbt) with networking enabled via PCMCIA services on a laptop. The networking works properly (e.g. I can ping hosts etc.) but the console is over-written with warning message "eth0: interrupt(s) dropped!", which makes the system very hard to use.

I have searched for a solution through the PCMCIA and Ethernet HOWTO's and with no success. I can't tell if this is a problem with the card configuration or the Net Card driver or what to do to clear it.

Your advice would be greatly appreciated.

John Auld

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Dropped interrupts by David Hinds, 2000, Mar 17
(_ None Hardware & Software details by John Auld, 2000, Mar 17
(_ None Probably just an interrupt conflict by David Hinds, 2000, Mar 20

Add Message to: "PCMCIA Problem with 3COM 3C562D/3C563D "eth0: interrupt(s) dropped""

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10