Dropped interrupts 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: PCMCIA Problem with 3COM 3C562D/3C563D "eth0: interrupt(s) dropped" (John Auld)
Date: 2000, Mar 17
From: David Hinds <dhinds@pcmcia.sourceforge.org>

What sort of laptop? Can you capture the startup messages from the PCMCIA drivers? Interrupts are not being delivered to the card. It is not a problem with the driver for the card, it is a problem with the socket driver. It could be that this would be fixed by upgrading the PCMCIA package, but I don't know what version you've got. -- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

Hardware & Software details Re: Dropped interrupts (David Hinds) Date: 2000, Mar 17 From: John Auld jxa

Thanks for the prompt reply. The Laptop is a Twinhead Voyager. dmesg reports a Cirrus PD6729 PCI-to-PCMCIA chip and the PCMCIA services load the following modules (listed from `cat /proc/modules`) 3c589_cs 1 0 serial_cs 2 1 ds 2 [serial_cs 3c589_cs] 2 i82365 5 2 pcmcia_core 9 [serial_cs 3c589_cs ds i82365] 8 Software versions kernel = 2.0.37 PCMCIA Services = 3.0.12 3c589 driver = v0.99H I have used a boot floppy version of Linux as a means to recover data on Win9x laptops at work that are un-bootable or too unstable for use (I will need to use this many times!!!) and I have not yet read all of the init and config scripts, but I can configure the PCMCIA start up options if I need to. Thanks again for your help. John Auld

Probably just an interrupt conflict Re: Hardware & Software details (John Auld) Date: 2000, Mar 20 From: David Hinds <dhinds@pcmcia.sourceforge.org>

You probably just have an interrupt conflict with some other system device. I'd start by excluding interrupts in /etc/pcmcia/config.opts and see if that fixes the problem. -- Dave

[ Add Message ]  to: "Dropped interrupts"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]