[ Next-in-Thread ]  [ Next Message ] 

Dropped interrupts 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: PCMCIA Problem with 3COM 3C562D/3C563D "eth0: interrupt(s) dropped" (John Auld)
Date: 2000, Mar 17
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

What sort of laptop?  Can you capture the startup messages from the
PCMCIA drivers?

Interrupts are not being delivered to the card.  It is not a problem
with the driver for the card, it is a problem with the socket driver.
It could be that this would be fixed by upgrading the PCMCIA package,
but I don't know what version you've got.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Dropped interrupts

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Hardware & Software details by John Auld, 2000, Mar 17
(_ Probably just an interrupt conflict by David Hinds, 2000, Mar 20

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]