Hardware & Software details

Forum: PCMCIA Installation and Configuration Issues
Re: Question: PCMCIA Problem with 3COM 3C562D/3C563D "eth0: interrupt(s) dropped" (John Auld)
Re: Dropped interrupts (David Hinds)
Date: 2000, Mar 17
From: John Auld jxa

Thanks for the prompt reply. The Laptop is a Twinhead Voyager. dmesg reports a Cirrus PD6729 PCI-to-PCMCIA chip and the PCMCIA services load the following modules (listed from `cat /proc/modules`) 3c589_cs 1 0 serial_cs 2 1 ds 2 [serial_cs 3c589_cs] 2 i82365 5 2 pcmcia_core 9 [serial_cs 3c589_cs ds i82365] 8 Software versions kernel = 2.0.37 PCMCIA Services = 3.0.12 3c589 driver = v0.99H I have used a boot floppy version of Linux as a means to recover data on Win9x laptops at work that are un-bootable or too unstable for use (I will need to use this many times!!!) and I have not yet read all of the init and config scripts, but I can configure the PCMCIA start up options if I need to. Thanks again for your help. John Auld

[ Next-in-Thread ] [ Next Message ]

Select this message: Hardware & Software details

Messages Inline: [ 1 ] [ All ] Outline: [ 1 ] [ 2 ] [ All ]

1. Probably just an interrupt conflict by David Hinds, 2000, Mar 20

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ] [ Subscribe ] [ No Admin Mode ]
[ Show Frames ] [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]
[ Edit This Forum ]