[ Next-in-Thread ]  [ Next Message ] 

Probably just an interrupt conflict 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: PCMCIA Problem with 3COM 3C562D/3C563D "eth0: interrupt(s) dropped" (John Auld)
Re: Dropped interrupts (David Hinds)
Re: Hardware & Software details (John Auld)
Date: 2000, Mar 20
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

You probably just have an interrupt conflict with some other system
device.  I'd start by excluding interrupts in /etc/pcmcia/config.opts
and see if that fixes the problem.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Probably just an interrupt conflict

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]