I just upgraded my toshiba 490xcdt from redhat 6.0
to 6.1. i'm experiencing strange behaviour from the
pcmcia utilties in relation to my pcmcia 3com 3c589
network card.
1.) upon boot the card is not recognized.
2.) once the machine is up, if i reload pcmcia it
is still not recognized (/etc/rc.d/init.d/pcmcia restart)
3.) if i pull out the card and push it back in it _IS_
recognized and the appropriate driver is loaded.
all seems to work normally.
a peek in /var/log/messages on the the successful one (3)
shows the card to be loaded properly, name and all.
a similar look in /var/log/messages from attempts (1) and (2)
above show strange messages about an unknown memory
card that _dont'_ show up when i succeed with (3) above:
Mar 30 22:41:46 metis cardmgr[1615]: starting, version is 3.0.14
Mar 30 22:41:46 metis cardmgr[1615]: watching 2 sockets
Mar 30 22:41:46 metis kernel: cs: IO port probe 0x1000-0x17ff: clean.
Mar 30 22:41:46 metis kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x220-0
x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
Mar 30 22:41:46 metis kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Mar 30 22:41:46 metis cardmgr[1615]: initializing socket 0
Mar 30 22:41:46 metis kernel: cs: memory probe 0x0d0000-0x0dffff: excluding 0xd0
000-0xdffff
Mar 30 22:41:46 metis kernel: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0
000-0xcffff
Mar 30 22:41:46 metis cardmgr[1615]: socket 0: Anonymous Memory
Mar 30 22:41:46 metis cardmgr[1615]: executing: 'insmod /lib/modules/2.2.12-20/p
cmcia/memory_cs.o'
BUT i don't understand this since i DON'T have a memory
card in the machine. any ideas of what i can take
out or put into the pcmcia stuff to fix this?
the machine was running everything just fine under
redhat 6.0. if it were my machine i would have never
upgraded it... but i had to do it for my boss....
thanks,
mike
|
[ Edit This Forum ]