d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ??????
|
Hello!
I can't get my network card d-link dfe-660tx work. It is recognized by the cardmgr and the correct (?) driver tulip_cb is loaded. The lan activity led is blinking but the full duplex led remains dark (under win98 it is on). Every few minutes I get the following error message on the console eth0: Tx hung, 9 vs. 0. or sometimes eth0: Tx hung, 15 vs. 0. Below I have included info about my system configuration and logging from /var/log/messages. Could anyone help, please? Merci. Jochen Kirsch. ================================================ Computer model: Sony Vaio pcg-f190 pcmcia-card: d-link dfe-660tx, cardbus Linux version: Redhat 6.2 2.2.14-5.0 #1 Tue Mar 7 21:07:39 EST 2000 cardctl -V cardctl version 3.1.8
cardctl ident Socket 0: product info: "D-Link", "DFE-660", "CardBus Ethernet", "10/100" manfid: 0x0149, 0x0231 function: 6 (network) Socket 1: no product info available
cardctl status Socket 0: 3.3V CardBus card function 0: [ready] Socket 1: no card
cardctl config
Socket 0:
Vcc 3.3V Vpp1 3.3V Vpp2 3.3V
interface type is "cardbus"
irq 3 [exclusive] [level]
function 0:
io 0x0200-0x027f [32bit]
Socket 1:
not configured
/var/log/messages:
Apr 2 20:03:07 cerise pcmcia: Starting PCMCIA services: Apr 2 20:03:07 cerise pcmcia: modules Apr 2 20:03:08 cerise kernel: Linux PCMCIA Card Services 3.1.8 Apr 2 20:03:08 cerise kernel: kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39EST 2000 Apr 2 20:03:08 cerise kernel: options: [pci] [cardbus] [apm] Apr 2 20:03:08 cerise kernel: Intel PCIC probe: Apr 2 20:03:08 cerise kernel: Ricoh RL5C478 PCI-to-CardBus at bus 0 slot 10,mem 0x68000000, 2 sockets Apr 2 20:03:08 cerise kernel: host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34] Apr 2 20:03:08 cerise kernel: host opts [1]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 35/37] Apr 2 20:03:08 cerise kernel: ISA irqs (default) = 3,4,5,7,10,11,12 polling interval = 1000 ms Apr 2 20:03:08 cerise pcmcia: cardmgr. Apr 2 20:03:08 cerise cardmgr[426]: starting, version is 3.1.8 Apr 2 20:03:08 cerise rc: Starting pcmcia succeeded Apr 2 20:03:08 cerise cardmgr[426]: watching 2 sockets Apr 2 20:03:08 cerise kernel: cs: IO port probe 0x1000-0x17ff: clean. Apr 2 20:03:08 cerise kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x140-0x147 0x378-0x37f 0x4d0-0x4d7 Apr 2 20:03:08 cerise kernel: cs: IO port probe 0x0a00-0x0aff: clean. Apr 2 20:03:08 cerise kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019 Apr 2 20:03:08 cerise cardmgr[426]: initializing socket 0 Apr 2 20:03:08 cerise cardmgr[426]: socket 0: Linksys EtherFast 10/100 Apr 2 20:03:08 cerise cardmgr[426]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/cb_enabler.o' Apr 2 20:03:08 cerise cardmgr[426]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/tulip_cb.o' Apr 2 20:03:08 cerise kernel: cs: cb_config(bus 32) Apr 2 20:03:08 cerise kernel: fn 0 bar 1: io 0x200-0x27f Apr 2 20:03:08 cerise kernel: fn 0 bar 2: mem 0x600c0000-0x600c03ff Apr 2 20:03:08 cerise kernel: fn 0 rom: mem 0x60080000-0x600bffff Apr 2 20:03:08 cerise kernel: tulip_attach(bus 32, function 0) Apr 2 20:03:08 cerise kernel: tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) Apr 2 20:03:08 cerise kernel: eth0: Digital DS21143 Tulip rev 65 at 0x200, 00:E0:98:78:14:CE, IRQ 3. Apr 2 20:03:08 cerise kernel: eth0: EEPROM default media type Autosense. Apr 2 20:03:08 cerise kernel: eth0: Index #0 - Media MII (#11) described by a21142 MII PHY (3) block. Apr 2 20:03:08 cerise kernel: eth0: MII transceiver #0 config 3000 status 7809 advertising 01e1. Apr 2 20:03:08 cerise cardmgr[426]: executing: './network start eth0' Apr 2 20:03:14 cerise kernel: eth0: Setting full-duplex based on MII#0 link partner capability of 4461. Apr 2 20:03:14 cerise kernel: eth0: Tx hung, 9 vs. 0. Apr 2 20:03:15 cerise rc: Starting linuxconf succeeded Apr 2 20:04:14 cerise kernel: eth0: Tx hung, 9 vs. 0. Apr 2 20:05:14 cerise kernel: eth0: Tx hung, 9 vs. 0.
|
Messages
Outline:
still same symptoms... by Jochen Kirsch, 2000, Apr 03
Another thing to try by David Hinds, 2000, Apr 03
no luck... by Jochen Kirsch, 2000, Apr 03 
dump_pirq output by Jochen Kirsch, 2000, Apr 04
"PCI irq 9 test failed" again... :- by Jochen Kirsch, 2000, Apr 05
same problem by Lincoln Stein, 2000, Apr 19
one last question by Jochen Kirsch, 2000, Apr 08
The card is not the problem by David Hinds, 2000, Apr 08
buggy cardbus bridge - consequence for other cards; workaround? by Jochen Kirsch, 2000, Apr 08
I don't know by David Hinds, 2000, Apr 11
ok by Jochen Kirsch, 2000, Apr 12
25-Apr-00 beta results by Jochen Kirsch, 2000, Apr 26
Several issues by David Hinds, 2000, Apr 26
26-Apr-00 beta - results by Jochen Kirsch, 2000, Apr 27
card insertions ok with 26-Apr-beta by Jochen Kirsch, 2000, Apr 27
mii-tool results by Jochen Kirsch, 2000, Apr 28
to:
