Next-in-Thread Next Message

Question d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ?????? 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Apr 02
From: Jochen Kirsch cerise

Hello!

I can't get my network card d-link dfe-660tx work. It is recognized by the cardmgr and the correct (?) driver tulip_cb is loaded. The lan activity led is blinking but the full duplex led remains dark (under win98 it is on). Every few minutes I get the following error message on the console

eth0: Tx hung, 9 vs. 0.     or sometimes
eth0: Tx hung, 15 vs. 0.

Below I have included info about my system configuration and logging from /var/log/messages.

Could anyone help, please?

Merci.

Jochen Kirsch.

================================================

Computer model: Sony Vaio pcg-f190

pcmcia-card: d-link dfe-660tx, cardbus

Linux version: Redhat 6.2 2.2.14-5.0 #1 Tue Mar 7 21:07:39 EST 2000

cardctl -V cardctl version 3.1.8

cardctl ident
Socket 0:
  product info: "D-Link", "DFE-660", "CardBus Ethernet", "10/100"
  manfid: 0x0149, 0x0231
  function: 6 (network)
Socket 1:
  no product info available

cardctl status
Socket 0:
  3.3V CardBus card
  function 0: [ready]
Socket 1:
  no card

cardctl config
Socket 0:
  Vcc 3.3V  Vpp1 3.3V  Vpp2 3.3V
  interface type is "cardbus"
  irq 3 [exclusive] [level]
  function 0:
    io 0x0200-0x027f [32bit]
Socket 1:
  not configured

/var/log/messages:

Apr  2 20:03:07 cerise pcmcia: Starting PCMCIA services:
Apr  2 20:03:07 cerise pcmcia:  modules
Apr  2 20:03:08 cerise kernel: Linux PCMCIA Card Services 3.1.8
Apr  2 20:03:08 cerise kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39
EST 2000
Apr  2 20:03:08 cerise kernel:   options:  [pci] [cardbus] [apm]
Apr  2 20:03:08 cerise kernel: Intel PCIC probe:
Apr  2 20:03:08 cerise kernel:   Ricoh RL5C478 PCI-to-CardBus at bus 0 slot 10,
mem 0x68000000, 2 sockets
Apr  2 20:03:08 cerise kernel:     host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34]
Apr  2 20:03:08 cerise kernel:     host opts [1]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 35/37]
Apr  2 20:03:08 cerise kernel:     ISA irqs (default) = 3,4,5,7,10,11,12 polling interval = 1000 ms
Apr  2 20:03:08 cerise pcmcia:  cardmgr.
Apr  2 20:03:08 cerise cardmgr[426]: starting, version is 3.1.8
Apr  2 20:03:08 cerise rc: Starting pcmcia succeeded
Apr  2 20:03:08 cerise cardmgr[426]: watching 2 sockets
Apr  2 20:03:08 cerise kernel: cs: IO port probe 0x1000-0x17ff: clean.
Apr  2 20:03:08 cerise kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x140-0x147 0x378-0x37f 0x4d0-0x4d7
Apr  2 20:03:08 cerise kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Apr  2 20:03:08 cerise kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019
Apr  2 20:03:08 cerise cardmgr[426]: initializing socket 0
Apr  2 20:03:08 cerise cardmgr[426]: socket 0: Linksys EtherFast 10/100
Apr  2 20:03:08 cerise cardmgr[426]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/cb_enabler.o'
Apr  2 20:03:08 cerise cardmgr[426]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/tulip_cb.o'
Apr  2 20:03:08 cerise kernel: cs: cb_config(bus 32)
Apr  2 20:03:08 cerise kernel:   fn 0 bar 1: io 0x200-0x27f
Apr  2 20:03:08 cerise kernel:   fn 0 bar 2: mem 0x600c0000-0x600c03ff
Apr  2 20:03:08 cerise kernel:   fn 0 rom: mem 0x60080000-0x600bffff
Apr  2 20:03:08 cerise kernel: tulip_attach(bus 32, function 0)
Apr  2 20:03:08 cerise kernel: tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
Apr  2 20:03:08 cerise kernel: eth0: Digital DS21143 Tulip rev 65 at 0x200, 00:E0:98:78:14:CE, IRQ 3.
Apr  2 20:03:08 cerise kernel: eth0:  EEPROM default media type Autosense.
Apr  2 20:03:08 cerise kernel: eth0:  Index #0 - Media MII (#11) described by a
21142 MII PHY (3) block.
Apr  2 20:03:08 cerise kernel: eth0:  MII transceiver #0 config 3000 status 7809 advertising 01e1.
Apr  2 20:03:08 cerise cardmgr[426]: executing: './network start eth0'
Apr  2 20:03:14 cerise kernel: eth0: Setting full-duplex based on MII#0 link partner capability of 4461.
Apr  2 20:03:14 cerise kernel: eth0: Tx hung, 9 vs. 0.
Apr  2 20:03:15 cerise rc: Starting linuxconf succeeded
Apr  2 20:04:14 cerise kernel: eth0: Tx hung, 9 vs. 0.
Apr  2 20:05:14 cerise kernel: eth0: Tx hung, 9 vs. 0.

Next-in-Thread Next Message

Select this message: d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ??????

Messages Inline: 1 All Outline: 1 2 All

1. Sad still same symptoms... by Jochen Kirsch, 2000, Apr 03
1. None Another thing to try by David Hinds, 2000, Apr 03
2. Sad no luck... by Jochen Kirsch, 2000, Apr 03
3. Feedback dump_pirq output by Jochen Kirsch, 2000, Apr 04
4. Feedback "PCI irq 9 test failed" again... :- by Jochen Kirsch, 2000, Apr 05
1. Feedback same problem by Lincoln Stein, 2000, Apr 19
5. Question one last question by Jochen Kirsch, 2000, Apr 08
1. None The card is not the problem by David Hinds, 2000, Apr 08
(_ Question buggy cardbus bridge - consequence for other cards; workaround? by Jochen Kirsch, 2000, Apr 08
(_ None I don't know by David Hinds, 2000, Apr 11
(_ None ok by Jochen Kirsch, 2000, Apr 12
6. Sad 25-Apr-00 beta results by Jochen Kirsch, 2000, Apr 26
1. None Several issues by David Hinds, 2000, Apr 26
7. Feedback 26-Apr-00 beta - results by Jochen Kirsch, 2000, Apr 27
1. Feedback card insertions ok with 26-Apr-beta by Jochen Kirsch, 2000, Apr 27
8. Feedback mii-tool results by Jochen Kirsch, 2000, Apr 28

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]