|
Hello!
I can't get my network card d-link dfe-660tx work. It is recognized by the cardmgr and the correct (?) driver tulip_cb is loaded. The lan activity led is blinking but the full duplex led remains dark (under win98 it is on). Every few minutes I get the following error message on the console eth0: Tx hung, 9 vs. 0. or sometimes eth0: Tx hung, 15 vs. 0. Below I have included info about my system configuration and logging from /var/log/messages. Could anyone help, please? Merci. Jochen Kirsch. ================================================ Computer model: Sony Vaio pcg-f190 pcmcia-card: d-link dfe-660tx, cardbus Linux version: Redhat 6.2 2.2.14-5.0 #1 Tue Mar 7 21:07:39 EST 2000 cardctl -V cardctl version 3.1.8
cardctl ident Socket 0: product info: "D-Link", "DFE-660", "CardBus Ethernet", "10/100" manfid: 0x0149, 0x0231 function: 6 (network) Socket 1: no product info available
cardctl status Socket 0: 3.3V CardBus card function 0: [ready] Socket 1: no card
cardctl config
Socket 0:
Vcc 3.3V Vpp1 3.3V Vpp2 3.3V
interface type is "cardbus"
irq 3 [exclusive] [level]
function 0:
io 0x0200-0x027f [32bit]
Socket 1:
not configured
/var/log/messages:
Apr 2 20:03:07 cerise pcmcia: Starting PCMCIA services: Apr 2 20:03:07 cerise pcmcia: modules Apr 2 20:03:08 cerise kernel: Linux PCMCIA Card Services 3.1.8 Apr 2 20:03:08 cerise kernel: kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39EST 2000 Apr 2 20:03:08 cerise kernel: options: [pci] [cardbus] [apm] Apr 2 20:03:08 cerise kernel: Intel PCIC probe: Apr 2 20:03:08 cerise kernel: Ricoh RL5C478 PCI-to-CardBus at bus 0 slot 10,mem 0x68000000, 2 sockets Apr 2 20:03:08 cerise kernel: host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34] Apr 2 20:03:08 cerise kernel: host opts [1]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 35/37] Apr 2 20:03:08 cerise kernel: ISA irqs (default) = 3,4,5,7,10,11,12 polling interval = 1000 ms Apr 2 20:03:08 cerise pcmcia: cardmgr. Apr 2 20:03:08 cerise cardmgr[426]: starting, version is 3.1.8 Apr 2 20:03:08 cerise rc: Starting pcmcia succeeded Apr 2 20:03:08 cerise cardmgr[426]: watching 2 sockets Apr 2 20:03:08 cerise kernel: cs: IO port probe 0x1000-0x17ff: clean. Apr 2 20:03:08 cerise kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x140-0x147 0x378-0x37f 0x4d0-0x4d7 Apr 2 20:03:08 cerise kernel: cs: IO port probe 0x0a00-0x0aff: clean. Apr 2 20:03:08 cerise kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019 Apr 2 20:03:08 cerise cardmgr[426]: initializing socket 0 Apr 2 20:03:08 cerise cardmgr[426]: socket 0: Linksys EtherFast 10/100 Apr 2 20:03:08 cerise cardmgr[426]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/cb_enabler.o' Apr 2 20:03:08 cerise cardmgr[426]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/tulip_cb.o' Apr 2 20:03:08 cerise kernel: cs: cb_config(bus 32) Apr 2 20:03:08 cerise kernel: fn 0 bar 1: io 0x200-0x27f Apr 2 20:03:08 cerise kernel: fn 0 bar 2: mem 0x600c0000-0x600c03ff Apr 2 20:03:08 cerise kernel: fn 0 rom: mem 0x60080000-0x600bffff Apr 2 20:03:08 cerise kernel: tulip_attach(bus 32, function 0) Apr 2 20:03:08 cerise kernel: tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) Apr 2 20:03:08 cerise kernel: eth0: Digital DS21143 Tulip rev 65 at 0x200, 00:E0:98:78:14:CE, IRQ 3. Apr 2 20:03:08 cerise kernel: eth0: EEPROM default media type Autosense. Apr 2 20:03:08 cerise kernel: eth0: Index #0 - Media MII (#11) described by a21142 MII PHY (3) block. Apr 2 20:03:08 cerise kernel: eth0: MII transceiver #0 config 3000 status 7809 advertising 01e1. Apr 2 20:03:08 cerise cardmgr[426]: executing: './network start eth0' Apr 2 20:03:14 cerise kernel: eth0: Setting full-duplex based on MII#0 link partner capability of 4461. Apr 2 20:03:14 cerise kernel: eth0: Tx hung, 9 vs. 0. Apr 2 20:03:15 cerise rc: Starting linuxconf succeeded Apr 2 20:04:14 cerise kernel: eth0: Tx hung, 9 vs. 0. Apr 2 20:05:14 cerise kernel: eth0: Tx hung, 9 vs. 0.
|
Messages