Next-in-Thread Next Message

Sad still same symptoms... 

Forum: PCMCIA Installation and Configuration Issues
Re: Question d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ?????? (Jochen Kirsch)
Date: 2000, Apr 03
From: Jochen Kirsch cerise

Thanks David for your answer!

>It is an interrupt delivery problem, and it is likely to be fixed in
>more up to date PCMCIA drivers.  The current release is 3.1.13.
>
>-- Dave

I've installed the new release, but unfortunately the problem resists... (see /var/log/messages below) (and in addition I have to start the network by hand now: ifup eth0) Is it right that the problem has to be solved inside the file tulip_cb.c? And do I have to wait for the next release? :-(

Thanks for any hints.

Jochen Kirsch.

===================================================

/var/log/messages:

Apr  3 22:49:45 cerise pcmcia: Starting PCMCIA services:
Apr  3 22:49:45 cerise pcmcia:  modules
Apr  3 22:49:45 cerise kernel: Linux PCMCIA Card Services 3.1.13
Apr  3 22:49:45 cerise kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39
EST 2000
Apr  3 22:49:45 cerise kernel:   options:  [pci] [cardbus] [apm]
Apr  3 22:49:45 cerise kernel: PCI routing table version 1.0 at 0xfdf60
Apr  3 22:49:45 cerise kernel:   00:0a.0 -> irq 9
Apr  3 22:49:45 cerise kernel: Intel PCIC probe:
Apr  3 22:49:45 cerise kernel:   Ricoh RL5C478 PCI-to-CardBus at slot 00:0a, mem 0x68000000
Apr  3 22:49:45 cerise kernel:     host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 32/34]
Apr  3 22:49:45 cerise kernel:     host opts [1]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 35/37]
Apr  3 22:49:45 cerise kernel:     PCI irq 9 test failed
Apr  3 22:49:45 cerise kernel:     ISA irqs (default) = 3,4,5,7,10,11,12 polling interval = 1000 ms
Apr  3 22:49:45 cerise pcmcia:  cardmgr.
Apr  3 22:49:45 cerise rc: Starting pcmcia succeeded
Apr  3 22:49:45 cerise cardmgr[423]: starting, version is 3.1.13
Apr  3 22:49:45 cerise cardmgr[423]: watching 2 sockets
Apr  3 22:49:45 cerise kernel: cs: IO port probe 0x1000-0x17ff: clean.
Apr  3 22:49:45 cerise kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x140-0x147 0x378-0x37f 0x4d0-0x4d7
Apr  3 22:49:45 cerise kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Apr  3 22:49:45 cerise kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019
Apr  3 22:49:45 cerise cardmgr[423]: initializing socket 0
Apr  3 22:49:45 cerise cardmgr[423]: socket 0: Linksys EtherFast 10/100
Apr  3 22:49:46 cerise cardmgr[423]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/cb_enabler.o'
Apr  3 22:49:46 cerise cardmgr[423]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/tulip_cb.o'
Apr  3 22:49:46 cerise kernel: cs: cb_config(bus 32)
Apr  3 22:49:46 cerise kernel:   fn 0 bar 1: io 0x200-0x27f
Apr  3 22:49:46 cerise kernel:   fn 0 bar 2: mem 0x600c0000-0x600c03ff
Apr  3 22:49:46 cerise kernel:   fn 0 rom: mem 0x60080000-0x600bffff
Apr  3 22:49:46 cerise kernel: tulip_attach(bus 32, function 0)
Apr  3 22:49:46 cerise kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
Apr  3 22:49:46 cerise kernel: eth0: Digital DS21143 Tulip rev 65 at 0x200, 00:E0:98:78:14:CE, IRQ 5.
Apr  3 22:49:46 cerise kernel: eth0:  EEPROM default media type Autosense.
Apr  3 22:49:46 cerise kernel: eth0:  Index #0 - Media MII (#11) described by a
21142 MII PHY (3) block.
Apr  3 22:49:46 cerise kernel: eth0:  MII transceiver #0 config 3000 status 7809 advertising 01e1.
Apr  3 22:49:46 cerise cardmgr[423]: executing: './network start eth0'
Apr  3 22:51:03 cerise kernel: eth0: Setting full-duplex based on MII#0 link partner capability of 4461.
Apr  3 22:51:03 cerise kernel: eth0: Tx hung, 9 vs. 0.
Apr  3 22:52:03 cerise kernel: eth0: Tx hung, 9 vs. 0.
Apr  3 22:53:03 cerise kernel: eth0: Tx hung, 9 vs. 0.

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Another thing to try by David Hinds, 2000, Apr 03

Add Message to: "still same symptoms..."

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10