Next-in-Thread Next Message

Feedback "PCI irq 9 test failed" again... :-( 

Forum: PCMCIA Installation and Configuration Issues
Re: Question d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ?????? (Jochen Kirsch)
Date: 2000, Apr 05
From: Jochen Kirsch cerise

thank you very much for providing the 3.1.14 version of the pcmcia-package. I would have really preferred it to tell you a success story, but I'm sorry, unfortunately the irq 9 test still fails. I don't understand why this irq 9 is that important as irq 3 is actually assigned to the card!? Whereas under windows irq 9 is assigned to the card and (astonishingly) also to my soundcard/video chip (neomagic magicmedia 256av+ac97 driver(wdm)); and windows reports no conflicts!? But I noticed the following: since I have inserted the new d-ling card windows reports after booting that setting the soundcard to full duplex mode failed (and after that something like: IP:port already in use); but this behaviour persists even after taking the network card out of my computer and reinstalling the soundcard driver... I don't understand that, but perhaps it is useful for you.

====================================================

here once again the /var/log/messages output:

Apr  5 04:53:58 cerise pcmcia: Starting PCMCIA services:
Apr  5 04:53:58 cerise pcmcia:  modules
Apr  5 04:53:58 cerise kernel: Linux PCMCIA Card Services 3.1.14
Apr  5 04:53:58 cerise kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39
EST 2000
Apr  5 04:53:58 cerise kernel:   options:  [pci] [cardbus] [apm]
Apr  5 04:53:58 cerise kernel: PCI routing table version 1.0 at 0xfdf60
Apr  5 04:53:58 cerise kernel:   00:0a.0 -> irq 9
Apr  5 04:53:58 cerise kernel: Intel PCIC probe:
Apr  5 04:53:58 cerise kernel:   Ricoh RL5C478 rev 80 PCI-to-CardBus at slot 00:0a, mem 0x68000000
Apr  5 04:53:58 cerise kernel:     host opts [0]: [serial irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 32/34]
Apr  5 04:53:58 cerise kernel:     host opts [1]: [serial irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 35/37]
Apr  5 04:53:58 cerise kernel:     PCI irq 9 test failed
Apr  5 04:53:58 cerise kernel:     ISA irqs (default) = 3,4,5,7,10,11,12 polling interval = 1000 ms
Apr  5 04:53:58 cerise pcmcia:  cardmgr.
Apr  5 04:53:59 cerise rc: Starting pcmcia succeeded
Apr  5 04:53:59 cerise cardmgr[423]: starting, version is 3.1.14
Apr  5 04:53:59 cerise cardmgr[423]: watching 2 sockets
Apr  5 04:53:59 cerise kernel: cs: IO port probe 0x1000-0x17ff: clean.
Apr  5 04:53:59 cerise kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x140-0x147 0x378-0x37f 0x4d0-0x4d7
Apr  5 04:53:59 cerise kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Apr  5 04:53:59 cerise kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019
Apr  5 04:53:59 cerise cardmgr[423]: initializing socket 0
Apr  5 04:53:59 cerise cardmgr[423]: socket 0: Linksys EtherFast 10/100
Apr  5 04:53:59 cerise cardmgr[423]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/cb_enabler.o'
Apr  5 04:53:59 cerise cardmgr[423]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/tulip_cb.o'
Apr  5 04:53:59 cerise kernel: cs: cb_config(bus 32)
Apr  5 04:53:59 cerise kernel:   fn 0 bar 1: io 0x200-0x27f
Apr  5 04:53:59 cerise kernel:   fn 0 bar 2: mem 0x600c0000-0x600c03ff
Apr  5 04:53:59 cerise kernel:   fn 0 rom: mem 0x60080000-0x600bffff
Apr  5 04:53:59 cerise kernel: tulip_attach(bus 32, function 0)
Apr  5 04:53:59 cerise kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
Apr  5 04:53:59 cerise kernel: eth0: Digital DS21143 Tulip rev 65 at 0x200, 00:E0:98:78:14:CE, IRQ 3.
Apr  5 04:53:59 cerise kernel: eth0:  EEPROM default media type Autosense.
Apr  5 04:53:59 cerise kernel: eth0:  Index #0 - Media MII (#11) described by a
21142 MII PHY (3) block.
Apr  5 04:53:59 cerise kernel: eth0:  MII transceiver #0 config 3000 status 7809 advertising 01e1.
Apr  5 04:53:59 cerise cardmgr[423]: executing: './network start eth0'
Apr  5 04:57:34 cerise kernel: eth0: Setting full-duplex based on MII#0 link partner capability of 4461.
Apr  5 04:57:34 cerise kernel: eth0: Tx hung, 9 vs. 0.
Apr  5 04:58:34 cerise kernel: eth0: Tx hung, 9 vs. 0.
Apr 5 05:00:54 cerise last message repeated 2 times

Next-in-Thread Next Message

Select this message: "PCI irq 9 test failed" again... :-(

Messages Inline: 1 All Outline: 1 2 All

1. Feedback same problem by Lincoln Stein, 2000, Apr 19

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]