|
thank you very much for providing the 3.1.14 version of the pcmcia-package. I would have really preferred it to tell you a success story, but I'm sorry, unfortunately the irq 9 test still fails.
I don't understand why this irq 9 is that important as irq 3 is actually assigned to the card!?
Whereas under windows irq 9 is assigned to the card and (astonishingly) also to my soundcard/video chip (neomagic magicmedia 256av+ac97 driver(wdm)); and windows reports no conflicts!?
But I noticed the following: since I have inserted the new d-ling card windows reports after booting that setting the soundcard to full duplex mode failed (and after that something like: IP:port already in use); but this behaviour persists even after taking the network card out of my computer and reinstalling the soundcard driver... I don't understand that, but perhaps it is useful for you.
==================================================== here once again the /var/log/messages output:
Apr 5 04:53:58 cerise pcmcia: Starting PCMCIA services: Apr 5 04:53:58 cerise pcmcia: modules Apr 5 04:53:58 cerise kernel: Linux PCMCIA Card Services 3.1.14 Apr 5 04:53:58 cerise kernel: kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39EST 2000 Apr 5 04:53:58 cerise kernel: options: [pci] [cardbus] [apm] Apr 5 04:53:58 cerise kernel: PCI routing table version 1.0 at 0xfdf60 Apr 5 04:53:58 cerise kernel: 00:0a.0 -> irq 9 Apr 5 04:53:58 cerise kernel: Intel PCIC probe: Apr 5 04:53:58 cerise kernel: Ricoh RL5C478 rev 80 PCI-to-CardBus at slot 00:0a, mem 0x68000000 Apr 5 04:53:58 cerise kernel: host opts [0]: [serial irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 32/34] Apr 5 04:53:58 cerise kernel: host opts [1]: [serial irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 35/37] Apr 5 04:53:58 cerise kernel: PCI irq 9 test failed Apr 5 04:53:58 cerise kernel: ISA irqs (default) = 3,4,5,7,10,11,12 polling interval = 1000 ms Apr 5 04:53:58 cerise pcmcia: cardmgr. Apr 5 04:53:59 cerise rc: Starting pcmcia succeeded Apr 5 04:53:59 cerise cardmgr[423]: starting, version is 3.1.14 Apr 5 04:53:59 cerise cardmgr[423]: watching 2 sockets Apr 5 04:53:59 cerise kernel: cs: IO port probe 0x1000-0x17ff: clean. Apr 5 04:53:59 cerise kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x140-0x147 0x378-0x37f 0x4d0-0x4d7 Apr 5 04:53:59 cerise kernel: cs: IO port probe 0x0a00-0x0aff: clean. Apr 5 04:53:59 cerise kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019 Apr 5 04:53:59 cerise cardmgr[423]: initializing socket 0 Apr 5 04:53:59 cerise cardmgr[423]: socket 0: Linksys EtherFast 10/100 Apr 5 04:53:59 cerise cardmgr[423]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/cb_enabler.o' Apr 5 04:53:59 cerise cardmgr[423]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/tulip_cb.o' Apr 5 04:53:59 cerise kernel: cs: cb_config(bus 32) Apr 5 04:53:59 cerise kernel: fn 0 bar 1: io 0x200-0x27f Apr 5 04:53:59 cerise kernel: fn 0 bar 2: mem 0x600c0000-0x600c03ff Apr 5 04:53:59 cerise kernel: fn 0 rom: mem 0x60080000-0x600bffff Apr 5 04:53:59 cerise kernel: tulip_attach(bus 32, function 0) Apr 5 04:53:59 cerise kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) Apr 5 04:53:59 cerise kernel: eth0: Digital DS21143 Tulip rev 65 at 0x200, 00:E0:98:78:14:CE, IRQ 3. Apr 5 04:53:59 cerise kernel: eth0: EEPROM default media type Autosense. Apr 5 04:53:59 cerise kernel: eth0: Index #0 - Media MII (#11) described by a21142 MII PHY (3) block. Apr 5 04:53:59 cerise kernel: eth0: MII transceiver #0 config 3000 status 7809 advertising 01e1. Apr 5 04:53:59 cerise cardmgr[423]: executing: './network start eth0' Apr 5 04:57:34 cerise kernel: eth0: Setting full-duplex based on MII#0 link partner capability of 4461. Apr 5 04:57:34 cerise kernel: eth0: Tx hung, 9 vs. 0. Apr 5 04:58:34 cerise kernel: eth0: Tx hung, 9 vs. 0.Apr 5 05:00:54 cerise last message repeated 2 times
|
Feedback: same problem
| |
|