Next-in-Thread Next Message

Feedback same problem 

Forum: PCMCIA Installation and Configuration Issues
Re: Question d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ?????? (Jochen Kirsch)
Re: Feedback "PCI irq 9 test failed" again... :-( (Jochen Kirsch)
Date: 2000, Apr 19
From: Lincoln Stein lstein

I experienced exactly the same problem when updating from 3.1.11 to 3.1.14. In addition, the whole system freezes up and needs to be coldbooted on a card insertion.

vitals:

	Sony 505TR
	linux 2.2.13 (slackware)

Under 3.1.11 I would see irq 9 being shared by i82365 and the usb driver. Under 3.1.14 i82365 polls.

Lincoln

Next-in-Thread Next Message

Select this message: same problem

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]