Question: one last question 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ?????? (Jochen Kirsch)
Date: 2000, Apr 08
From: Jochen Kirsch cerise

Hi, I would like to pose one more question: are there any chances to get my d-link card work with a future release of the pcmcia-cs package/tulip_cb driver, or is the problem due to my very combination of the Sony-notebook and the d-link card so that this will never be fixed and will never work (and I will have to look for a different card :-(( to get my Linux online)? As the d-link dfe-660 figures in the hardware compatibility list (though experimental) there must be some guys out there who have been luckier than me...!? Thanks for any comment. Jochen Kirsch.

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

The card is not the problem Re: Question: one last question (Jochen Kirsch) Date: 2000, Apr 08 From: David Hinds <dhinds@pcmcia.sourceforge.org>

The tulip driver is not the problem. The problem is with the Cardbus bridge in your laptop, which is not delivering interrupts properly. -- Dave

1. Question: buggy cardbus bridge - consequence for other cards; workaround? by Jochen Kirsch, 2000, Apr 08 (_ I don't know by David Hinds, 2000, Apr 11 (_ ok by Jochen Kirsch, 2000, Apr 12

[ Add Message ]  to: "one last question"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]