The card is not the problem

Forum: PCMCIA Installation and Configuration Issues
Re: Question: d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ?????? (Jochen Kirsch)
Re: Question: one last question (Jochen Kirsch)
Date: 2000, Apr 08
From: David Hinds <dhinds@pcmcia.sourceforge.org>

The tulip driver is not the problem. The problem is with the Cardbus bridge in your laptop, which is not delivering interrupts properly. -- Dave

[ Next-in-Thread ] [ Next Message ]

Select this message: The card is not the problem

Messages Inline: [ 1 ] [ All ] Outline: [ 1 ] [ 2 ] [ All ]

1. Question: buggy cardbus bridge - consequence for other cards; workaround? by Jochen Kirsch, 2000, Apr 08
(_ I don't know by David Hinds, 2000, Apr 11
(_ ok by Jochen Kirsch, 2000, Apr 12

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ] [ Subscribe ] [ No Admin Mode ]
[ Show Frames ] [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]
[ Edit This Forum ]