[ Next-in-Thread ]  [ Next Message ] 

Sad: 25-Apr-00 beta results 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ?????? (Jochen Kirsch)
Date: 2000, Apr 26
From: Jochen Kirsch cerise

ok, I have installed the new version but the results are not very encouraging... as I tried to reboot I got the following:

depmod: unresolved symbols in /lib/modules/2.2.14-5.0/pcmcia/aha1542x_cs.o

~/apa1480_cb.o

~/fdomain_cs.o

~/ibmtr_cs.o

~/qlogig_cs.o

and when the kernel tried to load the pcmcia services this ended up with:

... [<c01ce2ce>] [<c010a1c1>] [<c011176a>] [<c01ce576>] code: 8b 4a 04 85 c9 74 22 8b 5a 18 8b 02 89 01 8b 0a 85 c9 74 08

Aiee, killing interrupt handler

Kernel panic: Attempted to kill the idle task!

In interrupt handler - not syncing

after that only a hard reset helps

And: I'm unable to boot with my bootdisk and after booting with a rescue disk I cannot mount the linux partition(s)!! (something like: wrong superblock, too many mounted filesystems...)

Any ideas how to recover?

Thank you.

Jochen Kirsch.

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

Several issues

Re: Sad: 25-Apr-00 beta results (Jochen Kirsch)
Date: 2000, Apr 26
From: David Hinds <dhinds@pcmcia.sourceforge.org>

To boot, at the lilo prompt, say something like "linux single" to boot
to single user mode.  Then you can disable PCMCIA and then boot
normally.  Saying "linux PCMCIA=no" may also work.

I don't understand the unresolved symbol issues.  Based on the list of
modules, it sounds like the PCMCIA configure script thought you had
SCSI support in your kernel, but it isn't actually present.  I'm not
sure how that sort of goof-up could happen.  You could re-do "make
config" for the PCMCIA stuff and check the output carefully.

As for why the kernel trap, I'm not sure.  I'll take a closer look at
the changes I made for this beta.

-- Dave
25-Apr-00 beta results


[ Add Message ]  to: "25-Apr-00 beta results"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]