Next-in-Thread Next Message

Feedback 26-Apr-00 beta - results 

Forum: PCMCIA Installation and Configuration Issues
Re: Question d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ?????? (Jochen Kirsch)
Date: 2000, Apr 27
From: Jochen Kirsch cerise

With this version the kernel trap has fortunately disappeared and my system boots normally, but the "Tx hung, 9 vs. 0"-problem is still there... :-(

Nonetheless, thanks for the "linux single" hint.

Best regards,

Jo.

==========================================================

Here is my /var/log/messages:

Apr 27 20:40:40 cerise syslogd 1.3-3: restart.
Apr 27 20:40:40 cerise syslog: syslogd startup succeeded
Apr 27 20:40:40 cerise syslog: klogd startup succeeded
Apr 27 20:40:40 cerise kernel: klogd 1.3-3, log source = /proc/kmsg started.
Apr 27 20:40:40 cerise kernel: Inspecting /boot/System.map-2.2.14-5.0
Apr 27 20:40:40 cerise kernel: Loaded 6922 symbols from /boot/System.map-2.2.14-5.0.
Apr 27 20:40:40 cerise kernel: Symbols match kernel version 2.2.14.
Apr 27 20:40:40 cerise kernel: Loaded 81 symbols from 2 modules.
Apr 27 20:40:40 cerise kernel: Linux version 2.2.14-5.0 (root@cerise) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #5 Fri Apr 21 01:08:09 CEST 2000 
Apr 27 20:40:40 cerise kernel: Detected 364743644 Hz processor. 
Apr 27 20:40:40 cerise kernel: Console: colour VGA+ 80x25 
Apr 27 20:40:40 cerise kernel: Calibrating delay loop... 363.72 BogoMIPS 
Apr 27 20:40:40 cerise kernel: Memory: 63068k/65472k available (980k kernel code, 416k reserved, 948k data, 60k init, 0k bigmem) 
Apr 27 20:40:40 cerise kernel: Dentry hash table entries: 262144 (order 9, 2048k) 
Apr 27 20:40:40 cerise kernel: Buffer cache hash table entries: 65536 (order 6, 256k) 
Apr 27 20:40:40 cerise kernel: Page cache hash table entries: 16384 (order 4, 64k) 
Apr 27 20:40:40 cerise kernel: VFS: Diskquotas version dquot_6.4.0 initialized 
Apr 27 20:40:40 cerise kernel: CPU: Intel Mobile Pentium II stepping 0a 
Apr 27 20:40:40 cerise kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting. 
Apr 27 20:40:40 cerise kernel: Checking 'hlt' instruction... OK. 
Apr 27 20:40:41 cerise kernel: POSIX conformance testing by UNIFIX 
Apr 27 20:40:41 cerise kernel: mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) 
Apr 27 20:40:41 cerise kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9e4 
Apr 27 20:40:41 cerise kernel: PCI: Using configuration type 1 
Apr 27 20:40:41 cerise kernel: PCI: Probing PCI hardware 
Apr 27 20:40:41 cerise kernel: PCI: Enabling I/O for device 00:3a 
Apr 27 20:40:41 cerise kernel: PCI: Enabling memory for device 00:48 
Apr 27 20:40:41 cerise kernel: Linux NET4.0 for Linux 2.2 
Apr 27 20:40:41 cerise kernel: Based upon Swansea University Computer Society NET3.039 
Apr 27 20:40:41 cerise kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0. 
Apr 27 20:40:41 cerise kernel: NET4: Linux TCP/IP 1.0 for NET4.0 
Apr 27 20:40:41 cerise kernel: IP Protocols: ICMP, UDP, TCP, IGMP 
Apr 27 20:40:41 cerise kernel: TCP: Hash tables configured (ehash 65536 bhash 65536) 
Apr 27 20:40:41 cerise kernel: Initializing RT netlink socket 
Apr 27 20:40:41 cerise kernel: Starting kswapd v 1.5  
Apr 27 20:40:41 cerise kernel: Detected PS/2 Mouse Port. 
Apr 27 20:40:41 cerise kernel: Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled 
Apr 27 20:40:41 cerise kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A 
Apr 27 20:40:41 cerise kernel: ttyS02 at 0x03e8 (irq = 4) is a 16550A 
Apr 27 20:40:41 cerise kernel: pty: 256 Unix98 ptys configured 
Apr 27 20:40:41 cerise kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9) 
Apr 27 20:40:41 cerise kernel: Real Time Clock Driver v1.09 
Apr 27 20:40:41 cerise kernel: RAM disk driver initialized:  16 RAM disks of 4096K size 
Apr 27 20:40:41 cerise kernel: PIIX4: IDE controller on PCI bus 00 dev 39 
Apr 27 20:40:41 cerise kernel: PIIX4: not 100% native mode: will probe irqs later 
Apr 27 20:40:41 cerise kernel:     ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio 
Apr 27 20:40:41 cerise kernel:     ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:pio, hdd:pio 
Apr 27 20:40:41 cerise kernel: hda: IBM-DBCA-206480, ATA DISK drive 
Apr 27 20:40:41 cerise kernel: hdc: TOSHIBA DVD-ROM SD-C2102, ATAPI CDROM drive 
Apr 27 20:40:41 cerise kernel: ide2: ports already in use, skipping probe 
Apr 27 20:40:41 cerise kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 
Apr 27 20:40:41 cerise kernel: ide1 at 0x170-0x177,0x376 on irq 15 
Apr 27 20:40:41 cerise kernel: hda: IBM-DBCA-206480, 6194MB w/420kB Cache, CHS=839/240/63 
Apr 27 20:40:41 cerise kernel: hdc: ATAPI 20X DVD-ROM drive, 128kB Cache 
Apr 27 20:40:41 cerise kernel: Uniform CDROM driver Revision: 2.56 
Apr 27 20:40:41 cerise kernel: Floppy drive(s): fd0 is 1.44M 
Apr 27 20:40:41 cerise kernel: FDC 0 is a post-1991 82077 
Apr 27 20:40:41 cerise kernel: md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 
Apr 27 20:40:41 cerise kernel: raid5: measuring checksumming speed 
Apr 27 20:40:41 cerise kernel: raid5: MMX detected, trying high-speed MMX checksum routines 
Apr 27 20:40:41 cerise kernel:    pII_mmx   :   845.058 MB/sec 
Apr 27 20:40:41 cerise kernel:    p5_mmx    :   897.255 MB/sec 
Apr 27 20:40:41 cerise kernel:    8regs     :   626.364 MB/sec 
Apr 27 20:40:41 cerise kernel:    32regs    :   351.282 MB/sec 
Apr 27 20:40:41 cerise kernel: using fastest function: p5_mmx (897.255 MB/sec) 
Apr 27 20:40:41 cerise kernel: md.c: sizeof(mdp_super_t) = 4096 
Apr 27 20:40:41 cerise kernel: Partition check: 
Apr 27 20:40:41 cerise kernel:  hda: hda1 hda2 hda3 < hda5 hda6 > hda4 
Apr 27 20:40:41 cerise kernel: autodetecting RAID arrays 
Apr 27 20:40:41 cerise kernel: autorun ... 
Apr 27 20:40:41 cerise kernel: ... autorun DONE. 
Apr 27 20:40:41 cerise kernel: VFS: Mounted root (ext2 filesystem) readonly. 
Apr 27 20:40:41 cerise kernel: Freeing unused kernel memory: 60k freed 
Apr 27 20:40:41 cerise kernel: Adding Swap: 105800k swap-space (priority -1) 
Apr 27 20:40:41 cerise identd: identd startup succeeded
Apr 27 20:40:41 cerise atd: atd startup succeeded
Apr 27 20:40:42 cerise crond: crond startup succeeded
Apr 27 20:40:42 cerise sound: Starting sound: 
Apr 27 20:40:42 cerise kernel: NeoMagic 256AV/256ZX audio driver, version 1.1 
Apr 27 20:40:42 cerise kernel: NM256: Congratulations. You're not running Eunice. 
Apr 27 20:40:42 cerise kernel: NM256: Found card signature in video RAM: 0x27ec00 
Apr 27 20:40:42 cerise kernel: NM256: Mapping port 1 from 0x266c00 - 0x27ec00 
Apr 27 20:40:42 cerise kernel: Initialized NeoMagic 256AV audio in PCI native mode 
Apr 27 20:40:42 cerise kernel: Initialized AC97 mixer 
Apr 27 20:40:42 cerise kernel: Done installing NM256 audio driver. 
Apr 27 20:40:42 cerise sound: 
Apr 27 20:40:42 cerise rc: Starting sound succeeded
Apr 27 20:40:42 cerise pcmcia: Starting PCMCIA services:
Apr 27 20:40:42 cerise pcmcia:  modules
Apr 27 20:40:42 cerise kernel: Linux PCMCIA Card Services 3.1.15 
Apr 27 20:40:42 cerise kernel:   kernel build: 2.2.14-5.0 #5 Fri Apr 21 01:08:09 CEST 2000 
Apr 27 20:40:42 cerise kernel:   options:  [pci] [cardbus] [apm] 
Apr 27 20:40:42 cerise kernel: PCI routing table version 1.0 at 0xfdf60 
Apr 27 20:40:42 cerise kernel:   00:0a.0 -> irq 9 
Apr 27 20:40:42 cerise kernel: Intel PCIC probe:  
Apr 27 20:40:42 cerise kernel:   Ricoh RL5C478 rev 80 PCI-to-CardBus at slot 00:0a, mem 0x68000000 
Apr 27 20:40:42 cerise kernel:     host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 32/34] 
Apr 27 20:40:42 cerise kernel:     host opts [1]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 35/37] 
Apr 27 20:40:42 cerise kernel:     ISA irqs (default) = 3,4,5,7,10,11,12 PCI status changes 
Apr 27 20:40:42 cerise pcmcia:  cardmgr.
Apr 27 20:40:42 cerise rc: Starting pcmcia succeeded
Apr 27 20:40:42 cerise cardmgr[428]: starting, version is 3.1.15
Apr 27 20:40:43 cerise cardmgr[428]: watching 2 sockets
Apr 27 20:40:43 cerise kernel: cs: IO port probe 0x1000-0x17ff: clean. 
Apr 27 20:40:43 cerise kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x140-0x147 0x378-0x37f 0x4d0-0x4d7 
Apr 27 20:40:43 cerise kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
Apr 27 20:40:43 cerise kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019 
Apr 27 20:40:43 cerise cardmgr[428]: initializing socket 0
Apr 27 20:40:43 cerise cardmgr[428]: socket 0: Linksys EtherFast 10/100
Apr 27 20:40:43 cerise cardmgr[428]: executing: 'modprobe cb_enabler'
Apr 27 20:40:43 cerise cardmgr[428]: executing: 'modprobe tulip_cb'
Apr 27 20:40:43 cerise kernel: cs: cb_config(bus 32) 
Apr 27 20:40:43 cerise kernel:   fn 0 bar 1: io 0x200-0x27f 
Apr 27 20:40:43 cerise kernel:   fn 0 bar 2: mem 0x600c0000-0x600c03ff 
Apr 27 20:40:43 cerise kernel:   fn 0 rom: mem 0x60080000-0x600bffff 
Apr 27 20:40:43 cerise kernel: tulip_attach(device 20:00.0) 
Apr 27 20:40:43 cerise kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) 
Apr 27 20:40:43 cerise kernel: eth0: Digital DS21143 Tulip rev 65 at 0x200, 00:E0:98:78:14:CE, IRQ 9. 
Apr 27 20:40:43 cerise kernel: eth0:  EEPROM default media type Autosense. 
Apr 27 20:40:43 cerise kernel: eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. 
Apr 27 20:40:43 cerise kernel: eth0:  MII transceiver #0 config 3000 status 7809 advertising 01e1. 
Apr 27 20:40:43 cerise cardmgr[428]: executing: './network start eth0'
Apr 27 20:42:47 cerise network: Setting network parameters succeeded
Apr 27 20:42:48 cerise network: Bringing up interface lo succeeded
Apr 27 20:42:48 cerise network: Bringing up interface eth0 succeeded
Apr 27 20:42:51 cerise kernel: eth0: Setting full-duplex based on MII#0 link partner capability of 4461. 
Apr 27 20:42:51 cerise kernel: eth0: Tx hung, 9 vs. 0. 
Apr 27 20:43:51 cerise kernel: eth0: Tx hung, 9 vs. 0. 
Apr 27 20:45:51 cerise last message repeated 2 times
Apr 27 20:47:51 cerise last message repeated 2 times
Apr 27 20:49:51 cerise last message repeated 2 times

Next-in-Thread Next Message

Select this message: 26-Apr-00 beta - results

Messages Inline: 1 All Outline: 1 2 All

1. Feedback card insertions ok with 26-Apr-beta by Jochen Kirsch, 2000, Apr 27

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]