Next-in-Thread Next Message

Feedback mii-tool results 

Forum: PCMCIA Installation and Configuration Issues
Re: Question d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ?????? (Jochen Kirsch)
Date: 2000, Apr 28
From: Jochen Kirsch cerise

Hi,

here is the output of the mii-tool:

eth0: negotiated 10baseT-FD, link ok
  registers for MII PHY 0: 
    1000 782d 0040 6212 01e1 4461 0003 0000
    0000 0000 0000 0000 0000 0000 0000 0000
    1000 0000 0000 0000 0000 0000 0500 0000
    0039 8236 0f00 ff00 0029 0000 10a0 000b
  product info: vendor 00:10:18, model 33 rev 2
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link partner: 10baseT-FD 10baseT-HD flow-control

Everything seems to be fine, doesn't it?

Jo.

Next-in-Thread Next Message

Add Message to: "mii-tool results"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10