[ Next-in-Thread ]  [ Next Message ] 

Feedback: mii-tool results 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ?????? (Jochen Kirsch)
Date: 2000, Apr 28
From: Jochen Kirsch cerise

Hi,

here is the output of the mii-tool: 

eth0: negotiated 10baseT-FD, link ok
  registers for MII PHY 0: 
    1000 782d 0040 6212 01e1 4461 0003 0000
    0000 0000 0000 0000 0000 0000 0000 0000
    1000 0000 0000 0000 0000 0000 0500 0000
    0039 8236 0f00 ff00 0029 0000 10a0 000b
  product info: vendor 00:10:18, model 33 rev 2
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link partner: 10baseT-FD 10baseT-HD flow-control

Everything seems to be fine, doesn't it?

Jo.

[ Next-in-Thread ]  [ Next Message ] 

Select this message: mii-tool results

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]