Next-in-Thread Next Message

Question Modules don't install 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Apr 07
From: Robert Dalrymple raddal

Hi:  I have been trying to get PCMCIA-CS 3.1.13 to build with
the 2.3.99-pre3 kernel (I need USB) on a Sony VAIO Z505HE.  The problem is in installing pcmcia-cs.  When I do
 `make config; make all; make install'
everything works fine, no error messages.  It's just that
there are no modules appearing in modules directory. They
never get compiled--I looked in the clients directory for example and nothing has compiled there.  

I am running REDHAT 6.1.92. It came with 2.2.15 built and PCMCIA running fine, so it works fine with this machine.

I have PCMCIA = y and CARDBUS=y in the Linux configuration. On booting, dmesg reports Linux PCMCIA card services 3.1.11 and that it is adding card bus controller 0: Ricoh .... and Yenta IRQ list. So the built-in stuff seems fine.

When I install a card, say flash memory card, the log file indicates that /lib/modules/2.3.99-pre3/pcmcia/ide_cs.o is missing.

I have also tried building PCMCIA-CS 3.1.8 but I get compile errors.

Thanks for any help.
Tony
 rad@udel.edu

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None The 2.3.* kernel stuff by David Hinds, 2000, Apr 07

Add Message to: "Modules don't install"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10