[ Next-in-Thread ]  [ Next Message ] 

Question: Modules don't install 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Apr 07
From: Robert Dalrymple raddal 

Hi:  I have been trying to get PCMCIA-CS 3.1.13 to build with
the 2.3.99-pre3 kernel (I need USB) on a Sony VAIO Z505HE.  The problem is in installing pcmcia-cs.  When I do
 `make config; make all; make install'
everything works fine, no error messages.  It's just that
there are no modules appearing in modules directory. They
never get compiled--I looked in the clients directory for example and nothing has compiled there.

I am running REDHAT 6.1.92. It came with 2.2.15 built and PCMCIA running fine, so it works fine with this machine.

I have PCMCIA = y and CARDBUS=y in the Linux configuration. On booting, dmesg reports Linux PCMCIA card services 3.1.11 and that it is adding card bus controller 0: Ricoh .... and Yenta IRQ list. So the built-in stuff seems fine.

When I install a card, say flash memory card, the log file indicates that /lib/modules/2.3.99-pre3/pcmcia/ide_cs.o is missing.

I have also tried building PCMCIA-CS 3.1.8 but I get compile errors. 

Thanks for any help.
Tony
 rad@udel.edu

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Modules don't install

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. The 2.3.* kernel stuff by David Hinds, 2000, Apr 07

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]